Variable wavelength, variable angle ellipsometry including a sensitivities correlation test

G. H. Bu-Abbud, N. M. Bashara, John A. Woollam

Research output: Contribution to journalArticle

78 Citations (Scopus)

Abstract

Combining simultaneously both variable wavelength and variable angle of incidence to assess solutions of the optical parameters of a system, a procedure is developed which provides more information on the optical parameters than methods where either the wavelength or the angle of incidence is held constant. This results in a reduction in the interdependence of the optical parameters, and provides for more acceptable solutions. For a film on a substrate structure, if one knows the substrate optical parameters, the thickness and optical properties of the film can be characterized at each wavelength without the need for (a) a dispersion equation, (b) an independent measurement of the thickness or (c) any special requirements on the substrate optical properties. For a nearly transparent film on an absorbing substrate, all four parameters of the three-medium model (the substrate and film refractive indices, substrate extinction coefficient and film thickness) can be determined. If in addition one uses a dispersion relation for the refractive index in a very weakly absorbing film, the optical properties of an absorbing substrate and the film can be determined unambiguously. As a second major feature of this paper we show that the sensitivity correlation matrix, as well as the traditional parameter correlation matrix, should be calculated if one is to determine the independence of ellipsometric parameter solutions. An SiO2 film on silicon is used for illustration, but of course the analysis is recommended for more complicated materials systems.

Original languageEnglish (US)
Pages (from-to)27-41
Number of pages15
JournalThin Solid Films
Volume138
Issue number1
DOIs
StatePublished - Apr 1 1986

Fingerprint

Ellipsometry
ellipsometry
Wavelength
sensitivity
Substrates
wavelengths
Optical properties
optical properties
Refractive index
incidence
refractivity
Silicon
Film thickness
extinction
film thickness
requirements
silicon
coefficients

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Metals and Alloys
  • Materials Chemistry

Cite this

Variable wavelength, variable angle ellipsometry including a sensitivities correlation test. / Bu-Abbud, G. H.; Bashara, N. M.; Woollam, John A.

In: Thin Solid Films, Vol. 138, No. 1, 01.04.1986, p. 27-41.

Research output: Contribution to journalArticle

@article{ec2afc441d8b47ea9a153d978cfe4898,
title = "Variable wavelength, variable angle ellipsometry including a sensitivities correlation test",
abstract = "Combining simultaneously both variable wavelength and variable angle of incidence to assess solutions of the optical parameters of a system, a procedure is developed which provides more information on the optical parameters than methods where either the wavelength or the angle of incidence is held constant. This results in a reduction in the interdependence of the optical parameters, and provides for more acceptable solutions. For a film on a substrate structure, if one knows the substrate optical parameters, the thickness and optical properties of the film can be characterized at each wavelength without the need for (a) a dispersion equation, (b) an independent measurement of the thickness or (c) any special requirements on the substrate optical properties. For a nearly transparent film on an absorbing substrate, all four parameters of the three-medium model (the substrate and film refractive indices, substrate extinction coefficient and film thickness) can be determined. If in addition one uses a dispersion relation for the refractive index in a very weakly absorbing film, the optical properties of an absorbing substrate and the film can be determined unambiguously. As a second major feature of this paper we show that the sensitivity correlation matrix, as well as the traditional parameter correlation matrix, should be calculated if one is to determine the independence of ellipsometric parameter solutions. An SiO2 film on silicon is used for illustration, but of course the analysis is recommended for more complicated materials systems.",
author = "Bu-Abbud, {G. H.} and Bashara, {N. M.} and Woollam, {John A.}",
year = "1986",
month = "4",
day = "1",
doi = "10.1016/0040-6090(86)90212-9",
language = "English (US)",
volume = "138",
pages = "27--41",
journal = "Thin Solid Films",
issn = "0040-6090",
publisher = "Elsevier",
number = "1",

}

TY - JOUR

T1 - Variable wavelength, variable angle ellipsometry including a sensitivities correlation test

AU - Bu-Abbud, G. H.

AU - Bashara, N. M.

AU - Woollam, John A.

PY - 1986/4/1

Y1 - 1986/4/1

N2 - Combining simultaneously both variable wavelength and variable angle of incidence to assess solutions of the optical parameters of a system, a procedure is developed which provides more information on the optical parameters than methods where either the wavelength or the angle of incidence is held constant. This results in a reduction in the interdependence of the optical parameters, and provides for more acceptable solutions. For a film on a substrate structure, if one knows the substrate optical parameters, the thickness and optical properties of the film can be characterized at each wavelength without the need for (a) a dispersion equation, (b) an independent measurement of the thickness or (c) any special requirements on the substrate optical properties. For a nearly transparent film on an absorbing substrate, all four parameters of the three-medium model (the substrate and film refractive indices, substrate extinction coefficient and film thickness) can be determined. If in addition one uses a dispersion relation for the refractive index in a very weakly absorbing film, the optical properties of an absorbing substrate and the film can be determined unambiguously. As a second major feature of this paper we show that the sensitivity correlation matrix, as well as the traditional parameter correlation matrix, should be calculated if one is to determine the independence of ellipsometric parameter solutions. An SiO2 film on silicon is used for illustration, but of course the analysis is recommended for more complicated materials systems.

AB - Combining simultaneously both variable wavelength and variable angle of incidence to assess solutions of the optical parameters of a system, a procedure is developed which provides more information on the optical parameters than methods where either the wavelength or the angle of incidence is held constant. This results in a reduction in the interdependence of the optical parameters, and provides for more acceptable solutions. For a film on a substrate structure, if one knows the substrate optical parameters, the thickness and optical properties of the film can be characterized at each wavelength without the need for (a) a dispersion equation, (b) an independent measurement of the thickness or (c) any special requirements on the substrate optical properties. For a nearly transparent film on an absorbing substrate, all four parameters of the three-medium model (the substrate and film refractive indices, substrate extinction coefficient and film thickness) can be determined. If in addition one uses a dispersion relation for the refractive index in a very weakly absorbing film, the optical properties of an absorbing substrate and the film can be determined unambiguously. As a second major feature of this paper we show that the sensitivity correlation matrix, as well as the traditional parameter correlation matrix, should be calculated if one is to determine the independence of ellipsometric parameter solutions. An SiO2 film on silicon is used for illustration, but of course the analysis is recommended for more complicated materials systems.

UR - http://www.scopus.com/inward/record.url?scp=0022703383&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022703383&partnerID=8YFLogxK

U2 - 10.1016/0040-6090(86)90212-9

DO - 10.1016/0040-6090(86)90212-9

M3 - Article

AN - SCOPUS:0022703383

VL - 138

SP - 27

EP - 41

JO - Thin Solid Films

JF - Thin Solid Films

SN - 0040-6090

IS - 1

ER -