Tribological Assessment of UHMWPE in the Knee

Research output: Chapter in Book/Report/Conference proceedingChapter

21 Citations (Scopus)

Abstract

The testing of implants can be generally categorized into in vivo and in vitro testing. This chapter deals with in vitro tests. The obvious main benefit of such tests is that the evaluation can be made at the total knee replacement (TKR) design and prototyping stage and thus can not only screen risks prior to clinical use but can aid with useful feedback to the design process. TKR is quickly approaching and virtually all current TKR designs use ultra-high molecular weight polyethylene (UHMWPE) as a bearing component. With rising demand for TKR from a significant part of the aging population, more manufacturers and more types of prostheses continue to emerge, and the number of surgeons who carry out TKR and revision operations is probably increasing fastest of all. The testing of such a variety of implants poses a challenge. Testing itself needs to be standardized to help the industrial design process and to help the regulatory bodies in the screening of implants prior to their use clinically. The tribological testing of UHMWPE destined for TKR started with pin-on-disk (POD) testing, where preliminary screening of materials is needed. POD testing was described and could not take any consideration of the TKR design in the planning of the test, except for choices of articular contact area of the pin and the stress levels through suitable choices of loading. © 2009

Original languageEnglish (US)
Title of host publicationUHMWPE Biomaterials Handbook
PublisherElsevier Inc.
Pages381-408
Number of pages28
ISBN (Print)9780123747211
DOIs
StatePublished - Dec 1 2009

Fingerprint

Knee prostheses
Ultrahigh molecular weight polyethylenes
Testing
Screening
Bearings (structural)
Prosthetics
Product design
Aging of materials
Feedback
Planning

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Haider, H. (2009). Tribological Assessment of UHMWPE in the Knee. In UHMWPE Biomaterials Handbook (pp. 381-408). Elsevier Inc.. https://doi.org/10.1016/B978-0-12-374721-1.00026-2

Tribological Assessment of UHMWPE in the Knee. / Haider, Hani.

UHMWPE Biomaterials Handbook. Elsevier Inc., 2009. p. 381-408.

Research output: Chapter in Book/Report/Conference proceedingChapter

Haider, H 2009, Tribological Assessment of UHMWPE in the Knee. in UHMWPE Biomaterials Handbook. Elsevier Inc., pp. 381-408. https://doi.org/10.1016/B978-0-12-374721-1.00026-2
Haider, Hani. / Tribological Assessment of UHMWPE in the Knee. UHMWPE Biomaterials Handbook. Elsevier Inc., 2009. pp. 381-408
@inbook{b0949838142d4263b5e1205a4e8ab4c2,
title = "Tribological Assessment of UHMWPE in the Knee",
abstract = "The testing of implants can be generally categorized into in vivo and in vitro testing. This chapter deals with in vitro tests. The obvious main benefit of such tests is that the evaluation can be made at the total knee replacement (TKR) design and prototyping stage and thus can not only screen risks prior to clinical use but can aid with useful feedback to the design process. TKR is quickly approaching and virtually all current TKR designs use ultra-high molecular weight polyethylene (UHMWPE) as a bearing component. With rising demand for TKR from a significant part of the aging population, more manufacturers and more types of prostheses continue to emerge, and the number of surgeons who carry out TKR and revision operations is probably increasing fastest of all. The testing of such a variety of implants poses a challenge. Testing itself needs to be standardized to help the industrial design process and to help the regulatory bodies in the screening of implants prior to their use clinically. The tribological testing of UHMWPE destined for TKR started with pin-on-disk (POD) testing, where preliminary screening of materials is needed. POD testing was described and could not take any consideration of the TKR design in the planning of the test, except for choices of articular contact area of the pin and the stress levels through suitable choices of loading. {\circledC} 2009",
author = "Hani Haider",
year = "2009",
month = "12",
day = "1",
doi = "10.1016/B978-0-12-374721-1.00026-2",
language = "English (US)",
isbn = "9780123747211",
pages = "381--408",
booktitle = "UHMWPE Biomaterials Handbook",
publisher = "Elsevier Inc.",

}

TY - CHAP

T1 - Tribological Assessment of UHMWPE in the Knee

AU - Haider, Hani

PY - 2009/12/1

Y1 - 2009/12/1

N2 - The testing of implants can be generally categorized into in vivo and in vitro testing. This chapter deals with in vitro tests. The obvious main benefit of such tests is that the evaluation can be made at the total knee replacement (TKR) design and prototyping stage and thus can not only screen risks prior to clinical use but can aid with useful feedback to the design process. TKR is quickly approaching and virtually all current TKR designs use ultra-high molecular weight polyethylene (UHMWPE) as a bearing component. With rising demand for TKR from a significant part of the aging population, more manufacturers and more types of prostheses continue to emerge, and the number of surgeons who carry out TKR and revision operations is probably increasing fastest of all. The testing of such a variety of implants poses a challenge. Testing itself needs to be standardized to help the industrial design process and to help the regulatory bodies in the screening of implants prior to their use clinically. The tribological testing of UHMWPE destined for TKR started with pin-on-disk (POD) testing, where preliminary screening of materials is needed. POD testing was described and could not take any consideration of the TKR design in the planning of the test, except for choices of articular contact area of the pin and the stress levels through suitable choices of loading. © 2009

AB - The testing of implants can be generally categorized into in vivo and in vitro testing. This chapter deals with in vitro tests. The obvious main benefit of such tests is that the evaluation can be made at the total knee replacement (TKR) design and prototyping stage and thus can not only screen risks prior to clinical use but can aid with useful feedback to the design process. TKR is quickly approaching and virtually all current TKR designs use ultra-high molecular weight polyethylene (UHMWPE) as a bearing component. With rising demand for TKR from a significant part of the aging population, more manufacturers and more types of prostheses continue to emerge, and the number of surgeons who carry out TKR and revision operations is probably increasing fastest of all. The testing of such a variety of implants poses a challenge. Testing itself needs to be standardized to help the industrial design process and to help the regulatory bodies in the screening of implants prior to their use clinically. The tribological testing of UHMWPE destined for TKR started with pin-on-disk (POD) testing, where preliminary screening of materials is needed. POD testing was described and could not take any consideration of the TKR design in the planning of the test, except for choices of articular contact area of the pin and the stress levels through suitable choices of loading. © 2009

UR - http://www.scopus.com/inward/record.url?scp=77955274458&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77955274458&partnerID=8YFLogxK

U2 - 10.1016/B978-0-12-374721-1.00026-2

DO - 10.1016/B978-0-12-374721-1.00026-2

M3 - Chapter

AN - SCOPUS:77955274458

SN - 9780123747211

SP - 381

EP - 408

BT - UHMWPE Biomaterials Handbook

PB - Elsevier Inc.

ER -