Transverse post-tensioning design and detailing of precast, prestressed concrete adjacentbox-girder bridges

Kromel E. Hanna, George Morcous, Maher K. Tadros

Research output: Contribution to journalArticle

23 Citations (Scopus)

Abstract

Precast, prestressed concrete adjacent box girders are widely used in short-and medium-span bridges. Rapid construction and low construction cost are the main attractions of this system. Also, the continuous flat soffit and relatively high span-to-depth ratio make this system aesthetically pleasing. However, reflective cracking and leakage have been reported along the longitudinal joints between adjacent box girders in a number of bridges. The cracking and leakage are mainly due to inadequate design and detailing of the transverse connection between adjacent box girders, which eventually leads to excessive differential displacement and rotation of adjacent box girders. The reflective cracking and leakage allow chloride-induced corrosion of reinforcing steel and prestressing strand and premature deterioration of the bridge superstructure. This paper presents a review of the various practices in the transverse design and detailing of adjacent-box-girder bridges. The basis for calculating the transverse post-tensioning force according to PCI's Precast Prestressed Concrete Bridge Design Manual is discussed. Design charts and equations were developed for various combinations of span length, bridge width, skew angle, and girder depth using the latest loading from AASHTO LRFD Bridge Design Specifications. These aids may be viewed as an update to the information in section 8.9 of the PCI bridge design manual, which was based on an earlier version of the AASHTO standard specifications.

Original languageEnglish (US)
Pages (from-to)160-174
Number of pages15
JournalPCI Journal
Volume54
Issue number4
StatePublished - Sep 1 2009

Fingerprint

Prestressed concrete
Beams and girders
Box girder bridges
Specifications
Prestressing
Precast concrete
Concrete bridges
Steel
Deterioration
Chlorides
Corrosion
Costs

Keywords

  • Adjacent box girder
  • Bridge deterioration
  • Grid analysis
  • Longitudinal joint
  • Rapid construction
  • Shear key
  • Transverse design

ASJC Scopus subject areas

  • Building and Construction
  • Civil and Structural Engineering
  • Mechanics of Materials
  • Materials Science(all)

Cite this

Transverse post-tensioning design and detailing of precast, prestressed concrete adjacentbox-girder bridges. / Hanna, Kromel E.; Morcous, George; Tadros, Maher K.

In: PCI Journal, Vol. 54, No. 4, 01.09.2009, p. 160-174.

Research output: Contribution to journalArticle

@article{b4920382e3c54eaeb2e69dca2d377273,
title = "Transverse post-tensioning design and detailing of precast, prestressed concrete adjacentbox-girder bridges",
abstract = "Precast, prestressed concrete adjacent box girders are widely used in short-and medium-span bridges. Rapid construction and low construction cost are the main attractions of this system. Also, the continuous flat soffit and relatively high span-to-depth ratio make this system aesthetically pleasing. However, reflective cracking and leakage have been reported along the longitudinal joints between adjacent box girders in a number of bridges. The cracking and leakage are mainly due to inadequate design and detailing of the transverse connection between adjacent box girders, which eventually leads to excessive differential displacement and rotation of adjacent box girders. The reflective cracking and leakage allow chloride-induced corrosion of reinforcing steel and prestressing strand and premature deterioration of the bridge superstructure. This paper presents a review of the various practices in the transverse design and detailing of adjacent-box-girder bridges. The basis for calculating the transverse post-tensioning force according to PCI's Precast Prestressed Concrete Bridge Design Manual is discussed. Design charts and equations were developed for various combinations of span length, bridge width, skew angle, and girder depth using the latest loading from AASHTO LRFD Bridge Design Specifications. These aids may be viewed as an update to the information in section 8.9 of the PCI bridge design manual, which was based on an earlier version of the AASHTO standard specifications.",
keywords = "Adjacent box girder, Bridge deterioration, Grid analysis, Longitudinal joint, Rapid construction, Shear key, Transverse design",
author = "Hanna, {Kromel E.} and George Morcous and Tadros, {Maher K.}",
year = "2009",
month = "9",
day = "1",
language = "English (US)",
volume = "54",
pages = "160--174",
journal = "Journal of the Prestressed Concrete Institute",
issn = "0887-9672",
publisher = "Precast/Prestressed Concrete Institute",
number = "4",

}

TY - JOUR

T1 - Transverse post-tensioning design and detailing of precast, prestressed concrete adjacentbox-girder bridges

AU - Hanna, Kromel E.

AU - Morcous, George

AU - Tadros, Maher K.

PY - 2009/9/1

Y1 - 2009/9/1

N2 - Precast, prestressed concrete adjacent box girders are widely used in short-and medium-span bridges. Rapid construction and low construction cost are the main attractions of this system. Also, the continuous flat soffit and relatively high span-to-depth ratio make this system aesthetically pleasing. However, reflective cracking and leakage have been reported along the longitudinal joints between adjacent box girders in a number of bridges. The cracking and leakage are mainly due to inadequate design and detailing of the transverse connection between adjacent box girders, which eventually leads to excessive differential displacement and rotation of adjacent box girders. The reflective cracking and leakage allow chloride-induced corrosion of reinforcing steel and prestressing strand and premature deterioration of the bridge superstructure. This paper presents a review of the various practices in the transverse design and detailing of adjacent-box-girder bridges. The basis for calculating the transverse post-tensioning force according to PCI's Precast Prestressed Concrete Bridge Design Manual is discussed. Design charts and equations were developed for various combinations of span length, bridge width, skew angle, and girder depth using the latest loading from AASHTO LRFD Bridge Design Specifications. These aids may be viewed as an update to the information in section 8.9 of the PCI bridge design manual, which was based on an earlier version of the AASHTO standard specifications.

AB - Precast, prestressed concrete adjacent box girders are widely used in short-and medium-span bridges. Rapid construction and low construction cost are the main attractions of this system. Also, the continuous flat soffit and relatively high span-to-depth ratio make this system aesthetically pleasing. However, reflective cracking and leakage have been reported along the longitudinal joints between adjacent box girders in a number of bridges. The cracking and leakage are mainly due to inadequate design and detailing of the transverse connection between adjacent box girders, which eventually leads to excessive differential displacement and rotation of adjacent box girders. The reflective cracking and leakage allow chloride-induced corrosion of reinforcing steel and prestressing strand and premature deterioration of the bridge superstructure. This paper presents a review of the various practices in the transverse design and detailing of adjacent-box-girder bridges. The basis for calculating the transverse post-tensioning force according to PCI's Precast Prestressed Concrete Bridge Design Manual is discussed. Design charts and equations were developed for various combinations of span length, bridge width, skew angle, and girder depth using the latest loading from AASHTO LRFD Bridge Design Specifications. These aids may be viewed as an update to the information in section 8.9 of the PCI bridge design manual, which was based on an earlier version of the AASHTO standard specifications.

KW - Adjacent box girder

KW - Bridge deterioration

KW - Grid analysis

KW - Longitudinal joint

KW - Rapid construction

KW - Shear key

KW - Transverse design

UR - http://www.scopus.com/inward/record.url?scp=70350770863&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=70350770863&partnerID=8YFLogxK

M3 - Article

VL - 54

SP - 160

EP - 174

JO - Journal of the Prestressed Concrete Institute

JF - Journal of the Prestressed Concrete Institute

SN - 0887-9672

IS - 4

ER -