Thin films of a-SiGe:H with device quality properties prepared by a novel hollow cathode deposition technique

R. J. Soukup, N. J. Ianno, Scott A Darveau, Chris Exstrom

Research output: Contribution to journalArticle

30 Citations (Scopus)

Abstract

Using a novel hollow cathode plasma-jet reactive sputtering system in which an intense plasma, ignited in an Ar/H2 flow, is directed through silicon and germanium nozzles, a series of a-SiGe:H thin films have been prepared on silicon and on glass substrates. These films have been optically characterized by infrared (IR) spectroscopy, surface Raman spectroscopy and spectroscopic ellipsometry (335-1000 nm). Total hydrogen concentrations, as determined by FTIR, varied with deposition conditions and ranged from 2.5×1021 to 1.6×1022 atom cm-3 and correlated with secondary ion mass spectrometry (SIMS) elemental analyses to within 10%. The ellipsometric spectra of the films have been fitted with a modified Tauc-Lorentz model for the determination of film properties, including thickness (ranging from 400 to 1100 nm) along with film uniformity and surface roughness. Conductivity measurements in the dark and under simulated AM1 solar illumination have indicated that the films grown exhibit device-quality properties. The light-to-dark conductivity ratio has consistently been greater than 1000 for films with bandgaps down to 1.3 eV. Relationships between deposition parameters, light-and-dark conductivity properties, and chemical structural features are discussed.

Original languageEnglish (US)
Pages (from-to)87-98
Number of pages12
JournalSolar Energy Materials and Solar Cells
Volume87
Issue number1-4
DOIs
StatePublished - May 1 2005

Fingerprint

Cathodes
Thin films
Silicon
Germanium
Plasma jets
Spectroscopic ellipsometry
Reactive sputtering
Secondary ion mass spectrometry
Raman spectroscopy
Hydrogen
Infrared spectroscopy
Nozzles
Energy gap
Lighting
Surface roughness
Plasmas
Glass
Atoms
Substrates

Keywords

  • Amorphous Si/Ge
  • Ellipsometry
  • Fourier Transform Infrared (FTIR)
  • Hollow cathode sputtering

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Renewable Energy, Sustainability and the Environment
  • Surfaces, Coatings and Films

Cite this

Thin films of a-SiGe:H with device quality properties prepared by a novel hollow cathode deposition technique. / Soukup, R. J.; Ianno, N. J.; Darveau, Scott A; Exstrom, Chris.

In: Solar Energy Materials and Solar Cells, Vol. 87, No. 1-4, 01.05.2005, p. 87-98.

Research output: Contribution to journalArticle

@article{a4f1580a7d2c434987a578c060c92a9f,
title = "Thin films of a-SiGe:H with device quality properties prepared by a novel hollow cathode deposition technique",
abstract = "Using a novel hollow cathode plasma-jet reactive sputtering system in which an intense plasma, ignited in an Ar/H2 flow, is directed through silicon and germanium nozzles, a series of a-SiGe:H thin films have been prepared on silicon and on glass substrates. These films have been optically characterized by infrared (IR) spectroscopy, surface Raman spectroscopy and spectroscopic ellipsometry (335-1000 nm). Total hydrogen concentrations, as determined by FTIR, varied with deposition conditions and ranged from 2.5×1021 to 1.6×1022 atom cm-3 and correlated with secondary ion mass spectrometry (SIMS) elemental analyses to within 10{\%}. The ellipsometric spectra of the films have been fitted with a modified Tauc-Lorentz model for the determination of film properties, including thickness (ranging from 400 to 1100 nm) along with film uniformity and surface roughness. Conductivity measurements in the dark and under simulated AM1 solar illumination have indicated that the films grown exhibit device-quality properties. The light-to-dark conductivity ratio has consistently been greater than 1000 for films with bandgaps down to 1.3 eV. Relationships between deposition parameters, light-and-dark conductivity properties, and chemical structural features are discussed.",
keywords = "Amorphous Si/Ge, Ellipsometry, Fourier Transform Infrared (FTIR), Hollow cathode sputtering",
author = "Soukup, {R. J.} and Ianno, {N. J.} and Darveau, {Scott A} and Chris Exstrom",
year = "2005",
month = "5",
day = "1",
doi = "10.1016/j.solmat.2004.08.023",
language = "English (US)",
volume = "87",
pages = "87--98",
journal = "Solar Energy Materials and Solar Cells",
issn = "0927-0248",
publisher = "Elsevier",
number = "1-4",

}

TY - JOUR

T1 - Thin films of a-SiGe:H with device quality properties prepared by a novel hollow cathode deposition technique

AU - Soukup, R. J.

AU - Ianno, N. J.

AU - Darveau, Scott A

AU - Exstrom, Chris

PY - 2005/5/1

Y1 - 2005/5/1

N2 - Using a novel hollow cathode plasma-jet reactive sputtering system in which an intense plasma, ignited in an Ar/H2 flow, is directed through silicon and germanium nozzles, a series of a-SiGe:H thin films have been prepared on silicon and on glass substrates. These films have been optically characterized by infrared (IR) spectroscopy, surface Raman spectroscopy and spectroscopic ellipsometry (335-1000 nm). Total hydrogen concentrations, as determined by FTIR, varied with deposition conditions and ranged from 2.5×1021 to 1.6×1022 atom cm-3 and correlated with secondary ion mass spectrometry (SIMS) elemental analyses to within 10%. The ellipsometric spectra of the films have been fitted with a modified Tauc-Lorentz model for the determination of film properties, including thickness (ranging from 400 to 1100 nm) along with film uniformity and surface roughness. Conductivity measurements in the dark and under simulated AM1 solar illumination have indicated that the films grown exhibit device-quality properties. The light-to-dark conductivity ratio has consistently been greater than 1000 for films with bandgaps down to 1.3 eV. Relationships between deposition parameters, light-and-dark conductivity properties, and chemical structural features are discussed.

AB - Using a novel hollow cathode plasma-jet reactive sputtering system in which an intense plasma, ignited in an Ar/H2 flow, is directed through silicon and germanium nozzles, a series of a-SiGe:H thin films have been prepared on silicon and on glass substrates. These films have been optically characterized by infrared (IR) spectroscopy, surface Raman spectroscopy and spectroscopic ellipsometry (335-1000 nm). Total hydrogen concentrations, as determined by FTIR, varied with deposition conditions and ranged from 2.5×1021 to 1.6×1022 atom cm-3 and correlated with secondary ion mass spectrometry (SIMS) elemental analyses to within 10%. The ellipsometric spectra of the films have been fitted with a modified Tauc-Lorentz model for the determination of film properties, including thickness (ranging from 400 to 1100 nm) along with film uniformity and surface roughness. Conductivity measurements in the dark and under simulated AM1 solar illumination have indicated that the films grown exhibit device-quality properties. The light-to-dark conductivity ratio has consistently been greater than 1000 for films with bandgaps down to 1.3 eV. Relationships between deposition parameters, light-and-dark conductivity properties, and chemical structural features are discussed.

KW - Amorphous Si/Ge

KW - Ellipsometry

KW - Fourier Transform Infrared (FTIR)

KW - Hollow cathode sputtering

UR - http://www.scopus.com/inward/record.url?scp=17644416757&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=17644416757&partnerID=8YFLogxK

U2 - 10.1016/j.solmat.2004.08.023

DO - 10.1016/j.solmat.2004.08.023

M3 - Article

VL - 87

SP - 87

EP - 98

JO - Solar Energy Materials and Solar Cells

JF - Solar Energy Materials and Solar Cells

SN - 0927-0248

IS - 1-4

ER -