Theory and experiment for metal-on-polymer shear stress sensor in air flow

Chong H. Park, Kevin D. Cole

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

A new theory for hot-film shear stress sensors is presented along with supporting experimental results for steady air flow. The sensor has a thick metal film (ε = 6μm) on a polymer substrate that is glued to a surface for use in a fluid flow. Numerical calculations are carried out with analysis for three bodies (air, hot film, and polymer substrate). The theory presented in this paper applies to either thin metal or thick metal films, and the heat loss through the sensor's electric leads is included. Experimental results are reported for sensors glued on plexiglass and steel surfaces in steady flows. The new theory agrees well with the experimental calibration curve.

Original languageEnglish (US)
Title of host publicationHeat Transfer Measurements and Analysis
EditorsLouis C. Chow, Ashley F. Emery
PublisherPubl by ASME
Pages61-71
Number of pages11
ISBN (Print)079181162X
StatePublished - Dec 1 1993
EventThe 29th National Heat Transfer Conference - Atlanta, GA, USA
Duration: Aug 8 1993Aug 11 1993

Publication series

NameAmerican Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD
Volume249
ISSN (Print)0272-5673

Other

OtherThe 29th National Heat Transfer Conference
CityAtlanta, GA, USA
Period8/8/938/11/93

Fingerprint

Shear stress
Polymers
Metals
Sensors
Air
Experiments
Steel
Polymethyl Methacrylate
Substrates
Steady flow
Heat losses
Flow of fluids
Calibration

ASJC Scopus subject areas

  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

Cite this

Park, C. H., & Cole, K. D. (1993). Theory and experiment for metal-on-polymer shear stress sensor in air flow. In L. C. Chow, & A. F. Emery (Eds.), Heat Transfer Measurements and Analysis (pp. 61-71). (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD; Vol. 249). Publ by ASME.

Theory and experiment for metal-on-polymer shear stress sensor in air flow. / Park, Chong H.; Cole, Kevin D.

Heat Transfer Measurements and Analysis. ed. / Louis C. Chow; Ashley F. Emery. Publ by ASME, 1993. p. 61-71 (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD; Vol. 249).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Park, CH & Cole, KD 1993, Theory and experiment for metal-on-polymer shear stress sensor in air flow. in LC Chow & AF Emery (eds), Heat Transfer Measurements and Analysis. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, vol. 249, Publ by ASME, pp. 61-71, The 29th National Heat Transfer Conference, Atlanta, GA, USA, 8/8/93.
Park CH, Cole KD. Theory and experiment for metal-on-polymer shear stress sensor in air flow. In Chow LC, Emery AF, editors, Heat Transfer Measurements and Analysis. Publ by ASME. 1993. p. 61-71. (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD).
Park, Chong H. ; Cole, Kevin D. / Theory and experiment for metal-on-polymer shear stress sensor in air flow. Heat Transfer Measurements and Analysis. editor / Louis C. Chow ; Ashley F. Emery. Publ by ASME, 1993. pp. 61-71 (American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD).
@inproceedings{df750fa3e2ab48bfbf32dce44e23320f,
title = "Theory and experiment for metal-on-polymer shear stress sensor in air flow",
abstract = "A new theory for hot-film shear stress sensors is presented along with supporting experimental results for steady air flow. The sensor has a thick metal film (ε = 6μm) on a polymer substrate that is glued to a surface for use in a fluid flow. Numerical calculations are carried out with analysis for three bodies (air, hot film, and polymer substrate). The theory presented in this paper applies to either thin metal or thick metal films, and the heat loss through the sensor's electric leads is included. Experimental results are reported for sensors glued on plexiglass and steel surfaces in steady flows. The new theory agrees well with the experimental calibration curve.",
author = "Park, {Chong H.} and Cole, {Kevin D.}",
year = "1993",
month = "12",
day = "1",
language = "English (US)",
isbn = "079181162X",
series = "American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD",
publisher = "Publ by ASME",
pages = "61--71",
editor = "Chow, {Louis C.} and Emery, {Ashley F.}",
booktitle = "Heat Transfer Measurements and Analysis",

}

TY - GEN

T1 - Theory and experiment for metal-on-polymer shear stress sensor in air flow

AU - Park, Chong H.

AU - Cole, Kevin D.

PY - 1993/12/1

Y1 - 1993/12/1

N2 - A new theory for hot-film shear stress sensors is presented along with supporting experimental results for steady air flow. The sensor has a thick metal film (ε = 6μm) on a polymer substrate that is glued to a surface for use in a fluid flow. Numerical calculations are carried out with analysis for three bodies (air, hot film, and polymer substrate). The theory presented in this paper applies to either thin metal or thick metal films, and the heat loss through the sensor's electric leads is included. Experimental results are reported for sensors glued on plexiglass and steel surfaces in steady flows. The new theory agrees well with the experimental calibration curve.

AB - A new theory for hot-film shear stress sensors is presented along with supporting experimental results for steady air flow. The sensor has a thick metal film (ε = 6μm) on a polymer substrate that is glued to a surface for use in a fluid flow. Numerical calculations are carried out with analysis for three bodies (air, hot film, and polymer substrate). The theory presented in this paper applies to either thin metal or thick metal films, and the heat loss through the sensor's electric leads is included. Experimental results are reported for sensors glued on plexiglass and steel surfaces in steady flows. The new theory agrees well with the experimental calibration curve.

UR - http://www.scopus.com/inward/record.url?scp=0027799195&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027799195&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0027799195

SN - 079181162X

T3 - American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD

SP - 61

EP - 71

BT - Heat Transfer Measurements and Analysis

A2 - Chow, Louis C.

A2 - Emery, Ashley F.

PB - Publ by ASME

ER -