Synthesis of single-crystal Sm-Co nanoparticles by cluster beam deposition

O. Akdogan, W. Li, G. C. Hadjipanayis, David J Sellmyer

Research output: Contribution to journalArticle

16 Citations (Scopus)

Abstract

Single-crystal Sm-Co nanoparticles have been successfully produced by a cluster beam deposition technique. Particles have been deposited by DC magnetron sputtering using high Ar pressures on both single-crystal Si substrates and Au grids for the magnetic and structural/microstructural properties, respectively. Oxidation of the particles is prevented by using carbon buffer and cover layers. Nanoparticles have a uniform size distribution with an average size of 4.2, 6 and 7 nm at 1, 1.5 and 2 Torr of Ar pressure, respectively. At 1 Torr, the particles have the disordered 1:7 structure and a high coercivity of 19 kOe at 10 K. These particles show a superparamagnetic behavior with a blocking temperature of T B = 145 K. From this value of T B and the particle volume, the value of anisotropy constant K is estimated to be around 2.2 × 10 7 ergs/cc. Heat is introduced to the particles during their flight to the substrate to increase the particle size. Nanoparticles of SmCo5 with an average size of 15 nm and high room temperature coercivity have been produced. No change in magnetic and structural properties of the samples has been observed even after 10 months. Cluster beam deposition could play a key role for the production of rare earth nanoparticles for many applications.

Original languageEnglish (US)
Pages (from-to)7005-7012
Number of pages8
JournalJournal of Nanoparticle Research
Volume13
Issue number12
DOIs
StatePublished - Dec 1 2011

Fingerprint

Single Crystal
Nanoparticles
Single crystals
Synthesis
nanoparticles
single crystals
synthesis
Coercive force
Coercivity
Structural Properties
Substrates
coercivity
Substrate
Magnetron sputtering
Rare earths
Structural properties
Magnetic properties
Buffers
Magnetron Sputtering
Anisotropy

Keywords

  • Coercivity
  • Nanoparticles
  • Rare earth metals
  • Sm-Co
  • Sputtering

ASJC Scopus subject areas

  • Bioengineering
  • Atomic and Molecular Physics, and Optics
  • Chemistry(all)
  • Modeling and Simulation
  • Materials Science(all)
  • Condensed Matter Physics

Cite this

Synthesis of single-crystal Sm-Co nanoparticles by cluster beam deposition. / Akdogan, O.; Li, W.; Hadjipanayis, G. C.; Sellmyer, David J.

In: Journal of Nanoparticle Research, Vol. 13, No. 12, 01.12.2011, p. 7005-7012.

Research output: Contribution to journalArticle

Akdogan, O. ; Li, W. ; Hadjipanayis, G. C. ; Sellmyer, David J. / Synthesis of single-crystal Sm-Co nanoparticles by cluster beam deposition. In: Journal of Nanoparticle Research. 2011 ; Vol. 13, No. 12. pp. 7005-7012.
@article{e8145eb3f2a943418482e39ae1c93fca,
title = "Synthesis of single-crystal Sm-Co nanoparticles by cluster beam deposition",
abstract = "Single-crystal Sm-Co nanoparticles have been successfully produced by a cluster beam deposition technique. Particles have been deposited by DC magnetron sputtering using high Ar pressures on both single-crystal Si substrates and Au grids for the magnetic and structural/microstructural properties, respectively. Oxidation of the particles is prevented by using carbon buffer and cover layers. Nanoparticles have a uniform size distribution with an average size of 4.2, 6 and 7 nm at 1, 1.5 and 2 Torr of Ar pressure, respectively. At 1 Torr, the particles have the disordered 1:7 structure and a high coercivity of 19 kOe at 10 K. These particles show a superparamagnetic behavior with a blocking temperature of T B = 145 K. From this value of T B and the particle volume, the value of anisotropy constant K is estimated to be around 2.2 × 10 7 ergs/cc. Heat is introduced to the particles during their flight to the substrate to increase the particle size. Nanoparticles of SmCo5 with an average size of 15 nm and high room temperature coercivity have been produced. No change in magnetic and structural properties of the samples has been observed even after 10 months. Cluster beam deposition could play a key role for the production of rare earth nanoparticles for many applications.",
keywords = "Coercivity, Nanoparticles, Rare earth metals, Sm-Co, Sputtering",
author = "O. Akdogan and W. Li and Hadjipanayis, {G. C.} and Sellmyer, {David J}",
year = "2011",
month = "12",
day = "1",
doi = "10.1007/s11051-011-0612-8",
language = "English (US)",
volume = "13",
pages = "7005--7012",
journal = "Journal of Nanoparticle Research",
issn = "1388-0764",
publisher = "Springer Netherlands",
number = "12",

}

TY - JOUR

T1 - Synthesis of single-crystal Sm-Co nanoparticles by cluster beam deposition

AU - Akdogan, O.

AU - Li, W.

AU - Hadjipanayis, G. C.

AU - Sellmyer, David J

PY - 2011/12/1

Y1 - 2011/12/1

N2 - Single-crystal Sm-Co nanoparticles have been successfully produced by a cluster beam deposition technique. Particles have been deposited by DC magnetron sputtering using high Ar pressures on both single-crystal Si substrates and Au grids for the magnetic and structural/microstructural properties, respectively. Oxidation of the particles is prevented by using carbon buffer and cover layers. Nanoparticles have a uniform size distribution with an average size of 4.2, 6 and 7 nm at 1, 1.5 and 2 Torr of Ar pressure, respectively. At 1 Torr, the particles have the disordered 1:7 structure and a high coercivity of 19 kOe at 10 K. These particles show a superparamagnetic behavior with a blocking temperature of T B = 145 K. From this value of T B and the particle volume, the value of anisotropy constant K is estimated to be around 2.2 × 10 7 ergs/cc. Heat is introduced to the particles during their flight to the substrate to increase the particle size. Nanoparticles of SmCo5 with an average size of 15 nm and high room temperature coercivity have been produced. No change in magnetic and structural properties of the samples has been observed even after 10 months. Cluster beam deposition could play a key role for the production of rare earth nanoparticles for many applications.

AB - Single-crystal Sm-Co nanoparticles have been successfully produced by a cluster beam deposition technique. Particles have been deposited by DC magnetron sputtering using high Ar pressures on both single-crystal Si substrates and Au grids for the magnetic and structural/microstructural properties, respectively. Oxidation of the particles is prevented by using carbon buffer and cover layers. Nanoparticles have a uniform size distribution with an average size of 4.2, 6 and 7 nm at 1, 1.5 and 2 Torr of Ar pressure, respectively. At 1 Torr, the particles have the disordered 1:7 structure and a high coercivity of 19 kOe at 10 K. These particles show a superparamagnetic behavior with a blocking temperature of T B = 145 K. From this value of T B and the particle volume, the value of anisotropy constant K is estimated to be around 2.2 × 10 7 ergs/cc. Heat is introduced to the particles during their flight to the substrate to increase the particle size. Nanoparticles of SmCo5 with an average size of 15 nm and high room temperature coercivity have been produced. No change in magnetic and structural properties of the samples has been observed even after 10 months. Cluster beam deposition could play a key role for the production of rare earth nanoparticles for many applications.

KW - Coercivity

KW - Nanoparticles

KW - Rare earth metals

KW - Sm-Co

KW - Sputtering

UR - http://www.scopus.com/inward/record.url?scp=84857064746&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84857064746&partnerID=8YFLogxK

U2 - 10.1007/s11051-011-0612-8

DO - 10.1007/s11051-011-0612-8

M3 - Article

VL - 13

SP - 7005

EP - 7012

JO - Journal of Nanoparticle Research

JF - Journal of Nanoparticle Research

SN - 1388-0764

IS - 12

ER -