Sulfur:limestone autotrophic denitrification processes for treatment of nitrate-contaminated water

Batch experiments

Tian C Zhang, David G. Lampe

Research output: Contribution to journalArticle

133 Citations (Scopus)

Abstract

In this study, an innovative process of using sulfur:limestone autotrophic denitrification (SLAD) for treatment of nitrate-contaminated surface or wastewater was put forward. The feasibility of this SLAD process was evaluated using lab-scale batch reactors operated under both aerobic and anaerobic conditions. Autotrophic denitrification occurred in batch reactors spiked with sulfur:limestone (S:L) under either aerobic or anaerobic conditions at both high (ca. 300-500 mg NO3 --N/l) and low (ca. 30 mg NO3 --N/l) initial nitrate concentrations. Nitrate-nitrogen removal increased with the addition of granular sulfur and limestone, while the addition of a seed of autotrophic denitrifiers into the batch reactors accelerated nitrate removal. Limestone was necessary to control the pH within the reactors. The optimum sulfur:limestone ratio was 3:1 (v/v) and the extent and rate of nitrate removal depended on the alkalinity within SLAD batch reactors. Nitrate removal efficiency, sulfate production and biomass accumulation were usually higher under aerobic conditions than under anaerobic conditions. Bacterial counts signified that both autotrophic denitrificans and nondenitrifying bacteria such as Thiobacillus thiooxidans were involved in the process under aerobic conditions. The SLAD process may be a replacement for heterotrophic denitrification in pond systems such as constructed wetlands or stabilization ponds due to the fact that no organic carbon source is needed in the SLAD process and that autotrophic denitrificans exist widely in natural sediments or soil.

Original languageEnglish (US)
Pages (from-to)599-608
Number of pages10
JournalWater Research
Volume33
Issue number3
DOIs
StatePublished - Feb 1 1999

Fingerprint

Denitrification
Limestone
denitrification
Nitrates
Sulfur
sulfur
limestone
nitrate
Batch reactors
oxic conditions
Water
experiment
Experiments
water
anoxic conditions
pond
Stabilization ponds
Nitrogen removal
Ponds
Wetlands

Keywords

  • Autotrophic denitrificans
  • Denitrification
  • Limestone
  • Nitrate
  • Sulfur

ASJC Scopus subject areas

  • Ecological Modeling
  • Water Science and Technology
  • Waste Management and Disposal
  • Pollution

Cite this

Sulfur:limestone autotrophic denitrification processes for treatment of nitrate-contaminated water : Batch experiments. / Zhang, Tian C; Lampe, David G.

In: Water Research, Vol. 33, No. 3, 01.02.1999, p. 599-608.

Research output: Contribution to journalArticle

@article{d4ed2d258e7c430a8de3c0481a367d21,
title = "Sulfur:limestone autotrophic denitrification processes for treatment of nitrate-contaminated water: Batch experiments",
abstract = "In this study, an innovative process of using sulfur:limestone autotrophic denitrification (SLAD) for treatment of nitrate-contaminated surface or wastewater was put forward. The feasibility of this SLAD process was evaluated using lab-scale batch reactors operated under both aerobic and anaerobic conditions. Autotrophic denitrification occurred in batch reactors spiked with sulfur:limestone (S:L) under either aerobic or anaerobic conditions at both high (ca. 300-500 mg NO3 --N/l) and low (ca. 30 mg NO3 --N/l) initial nitrate concentrations. Nitrate-nitrogen removal increased with the addition of granular sulfur and limestone, while the addition of a seed of autotrophic denitrifiers into the batch reactors accelerated nitrate removal. Limestone was necessary to control the pH within the reactors. The optimum sulfur:limestone ratio was 3:1 (v/v) and the extent and rate of nitrate removal depended on the alkalinity within SLAD batch reactors. Nitrate removal efficiency, sulfate production and biomass accumulation were usually higher under aerobic conditions than under anaerobic conditions. Bacterial counts signified that both autotrophic denitrificans and nondenitrifying bacteria such as Thiobacillus thiooxidans were involved in the process under aerobic conditions. The SLAD process may be a replacement for heterotrophic denitrification in pond systems such as constructed wetlands or stabilization ponds due to the fact that no organic carbon source is needed in the SLAD process and that autotrophic denitrificans exist widely in natural sediments or soil.",
keywords = "Autotrophic denitrificans, Denitrification, Limestone, Nitrate, Sulfur",
author = "Zhang, {Tian C} and Lampe, {David G.}",
year = "1999",
month = "2",
day = "1",
doi = "10.1016/S0043-1354(98)00281-4",
language = "English (US)",
volume = "33",
pages = "599--608",
journal = "Water Research",
issn = "0043-1354",
publisher = "Elsevier Limited",
number = "3",

}

TY - JOUR

T1 - Sulfur:limestone autotrophic denitrification processes for treatment of nitrate-contaminated water

T2 - Batch experiments

AU - Zhang, Tian C

AU - Lampe, David G.

PY - 1999/2/1

Y1 - 1999/2/1

N2 - In this study, an innovative process of using sulfur:limestone autotrophic denitrification (SLAD) for treatment of nitrate-contaminated surface or wastewater was put forward. The feasibility of this SLAD process was evaluated using lab-scale batch reactors operated under both aerobic and anaerobic conditions. Autotrophic denitrification occurred in batch reactors spiked with sulfur:limestone (S:L) under either aerobic or anaerobic conditions at both high (ca. 300-500 mg NO3 --N/l) and low (ca. 30 mg NO3 --N/l) initial nitrate concentrations. Nitrate-nitrogen removal increased with the addition of granular sulfur and limestone, while the addition of a seed of autotrophic denitrifiers into the batch reactors accelerated nitrate removal. Limestone was necessary to control the pH within the reactors. The optimum sulfur:limestone ratio was 3:1 (v/v) and the extent and rate of nitrate removal depended on the alkalinity within SLAD batch reactors. Nitrate removal efficiency, sulfate production and biomass accumulation were usually higher under aerobic conditions than under anaerobic conditions. Bacterial counts signified that both autotrophic denitrificans and nondenitrifying bacteria such as Thiobacillus thiooxidans were involved in the process under aerobic conditions. The SLAD process may be a replacement for heterotrophic denitrification in pond systems such as constructed wetlands or stabilization ponds due to the fact that no organic carbon source is needed in the SLAD process and that autotrophic denitrificans exist widely in natural sediments or soil.

AB - In this study, an innovative process of using sulfur:limestone autotrophic denitrification (SLAD) for treatment of nitrate-contaminated surface or wastewater was put forward. The feasibility of this SLAD process was evaluated using lab-scale batch reactors operated under both aerobic and anaerobic conditions. Autotrophic denitrification occurred in batch reactors spiked with sulfur:limestone (S:L) under either aerobic or anaerobic conditions at both high (ca. 300-500 mg NO3 --N/l) and low (ca. 30 mg NO3 --N/l) initial nitrate concentrations. Nitrate-nitrogen removal increased with the addition of granular sulfur and limestone, while the addition of a seed of autotrophic denitrifiers into the batch reactors accelerated nitrate removal. Limestone was necessary to control the pH within the reactors. The optimum sulfur:limestone ratio was 3:1 (v/v) and the extent and rate of nitrate removal depended on the alkalinity within SLAD batch reactors. Nitrate removal efficiency, sulfate production and biomass accumulation were usually higher under aerobic conditions than under anaerobic conditions. Bacterial counts signified that both autotrophic denitrificans and nondenitrifying bacteria such as Thiobacillus thiooxidans were involved in the process under aerobic conditions. The SLAD process may be a replacement for heterotrophic denitrification in pond systems such as constructed wetlands or stabilization ponds due to the fact that no organic carbon source is needed in the SLAD process and that autotrophic denitrificans exist widely in natural sediments or soil.

KW - Autotrophic denitrificans

KW - Denitrification

KW - Limestone

KW - Nitrate

KW - Sulfur

UR - http://www.scopus.com/inward/record.url?scp=0033080857&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033080857&partnerID=8YFLogxK

U2 - 10.1016/S0043-1354(98)00281-4

DO - 10.1016/S0043-1354(98)00281-4

M3 - Article

VL - 33

SP - 599

EP - 608

JO - Water Research

JF - Water Research

SN - 0043-1354

IS - 3

ER -