Structure, activity and composition of biofilms

Tian C Zhang, P. L. Bishop

Research output: Contribution to journalConference article

65 Citations (Scopus)

Abstract

The spatial distributions of properties of biofilms have been investigated by using three different kinds of biofilms as test materials. Biofilms, cultured by laboratory-scale rotating drum biofilm reactors with synthetic wastewater, were first cut into 10 to 20 μm thick slices using a microtome, and then apportioned into samples representing 3 or 4 layers. The biofilm properties of each layer were investigated by measuring the densities, phospholipid concentrations, and AR18 dye adsorption abilities. The bacterial population distributions and the metabolically active bacterial distributions were studied by plate count methods or a MPN method, and the tetrazolium dye (INT) reduction method, respectively. Based on statistic evaluations, the micro-slicing technique, the procedure for analyzing phospholipid concentrations of biofilms, and the AR18 dye adsorption tests were suitable to be used in biofilm studies. It was found that the densities of biofilms in the bottom layers were 4 to 7 times higher than those in the top layers. For thick biofilms (thickness > 500 μm), the INT active bacteria decreased from 82-89% in the top layers to 5-11% in the bottom layers. The porosities of thick biofilms changed from 83-92% in the top layers to 56-64% in the bottom layers. For thin biofilms (thickness < 500 μm), the porosities of biofilms changed from 72-75% in the top layers to 35-44% in the bottom layers. Highly spatial distributions of bacterial populations, mean pore radius, and specific surface areas were also observed. As a result of these spatial distributions, the ratio of effective diffusivity to diffusivity in the bulk solution also shows a decrease with depth of the biofilm. Assuming biofilm properties are of a uniform distribution may be an over-simplified assumption, valid only in specific cases.

Original languageEnglish (US)
Pages (from-to)335-344
Number of pages10
JournalWater Science and Technology
Volume29
Issue number7
StatePublished - Jan 1 1994
Externally publishedYes
EventThe 1st International Specialized Conference on Microorganisms in Activated Sludge and Biofilm Processes - Paris, Fr
Duration: Sep 1 1993Sep 1 1993

Fingerprint

Biofilms
biofilm
Chemical analysis
Spatial distribution
dye
Dyes
Phospholipids
spatial distribution
phospholipid
diffusivity
Porosity
porosity
Population distribution
adsorption
Adsorption
population distribution
Specific surface area
Bacteria
Wastewater
surface area

Keywords

  • Bacterial activity
  • Bacterial populations
  • Biofilm
  • Density
  • Dye adsorption
  • Heterotrophic plate count
  • MPN method
  • Microtome
  • Phospholipid
  • Porosity
  • Spatial distribution

ASJC Scopus subject areas

  • Water Science and Technology

Cite this

Structure, activity and composition of biofilms. / Zhang, Tian C; Bishop, P. L.

In: Water Science and Technology, Vol. 29, No. 7, 01.01.1994, p. 335-344.

Research output: Contribution to journalConference article

Zhang, Tian C ; Bishop, P. L. / Structure, activity and composition of biofilms. In: Water Science and Technology. 1994 ; Vol. 29, No. 7. pp. 335-344.
@article{5c579d45efea42b6b852741065f6097f,
title = "Structure, activity and composition of biofilms",
abstract = "The spatial distributions of properties of biofilms have been investigated by using three different kinds of biofilms as test materials. Biofilms, cultured by laboratory-scale rotating drum biofilm reactors with synthetic wastewater, were first cut into 10 to 20 μm thick slices using a microtome, and then apportioned into samples representing 3 or 4 layers. The biofilm properties of each layer were investigated by measuring the densities, phospholipid concentrations, and AR18 dye adsorption abilities. The bacterial population distributions and the metabolically active bacterial distributions were studied by plate count methods or a MPN method, and the tetrazolium dye (INT) reduction method, respectively. Based on statistic evaluations, the micro-slicing technique, the procedure for analyzing phospholipid concentrations of biofilms, and the AR18 dye adsorption tests were suitable to be used in biofilm studies. It was found that the densities of biofilms in the bottom layers were 4 to 7 times higher than those in the top layers. For thick biofilms (thickness > 500 μm), the INT active bacteria decreased from 82-89{\%} in the top layers to 5-11{\%} in the bottom layers. The porosities of thick biofilms changed from 83-92{\%} in the top layers to 56-64{\%} in the bottom layers. For thin biofilms (thickness < 500 μm), the porosities of biofilms changed from 72-75{\%} in the top layers to 35-44{\%} in the bottom layers. Highly spatial distributions of bacterial populations, mean pore radius, and specific surface areas were also observed. As a result of these spatial distributions, the ratio of effective diffusivity to diffusivity in the bulk solution also shows a decrease with depth of the biofilm. Assuming biofilm properties are of a uniform distribution may be an over-simplified assumption, valid only in specific cases.",
keywords = "Bacterial activity, Bacterial populations, Biofilm, Density, Dye adsorption, Heterotrophic plate count, MPN method, Microtome, Phospholipid, Porosity, Spatial distribution",
author = "Zhang, {Tian C} and Bishop, {P. L.}",
year = "1994",
month = "1",
day = "1",
language = "English (US)",
volume = "29",
pages = "335--344",
journal = "Water Science and Technology",
issn = "0273-1223",
publisher = "IWA Publishing",
number = "7",

}

TY - JOUR

T1 - Structure, activity and composition of biofilms

AU - Zhang, Tian C

AU - Bishop, P. L.

PY - 1994/1/1

Y1 - 1994/1/1

N2 - The spatial distributions of properties of biofilms have been investigated by using three different kinds of biofilms as test materials. Biofilms, cultured by laboratory-scale rotating drum biofilm reactors with synthetic wastewater, were first cut into 10 to 20 μm thick slices using a microtome, and then apportioned into samples representing 3 or 4 layers. The biofilm properties of each layer were investigated by measuring the densities, phospholipid concentrations, and AR18 dye adsorption abilities. The bacterial population distributions and the metabolically active bacterial distributions were studied by plate count methods or a MPN method, and the tetrazolium dye (INT) reduction method, respectively. Based on statistic evaluations, the micro-slicing technique, the procedure for analyzing phospholipid concentrations of biofilms, and the AR18 dye adsorption tests were suitable to be used in biofilm studies. It was found that the densities of biofilms in the bottom layers were 4 to 7 times higher than those in the top layers. For thick biofilms (thickness > 500 μm), the INT active bacteria decreased from 82-89% in the top layers to 5-11% in the bottom layers. The porosities of thick biofilms changed from 83-92% in the top layers to 56-64% in the bottom layers. For thin biofilms (thickness < 500 μm), the porosities of biofilms changed from 72-75% in the top layers to 35-44% in the bottom layers. Highly spatial distributions of bacterial populations, mean pore radius, and specific surface areas were also observed. As a result of these spatial distributions, the ratio of effective diffusivity to diffusivity in the bulk solution also shows a decrease with depth of the biofilm. Assuming biofilm properties are of a uniform distribution may be an over-simplified assumption, valid only in specific cases.

AB - The spatial distributions of properties of biofilms have been investigated by using three different kinds of biofilms as test materials. Biofilms, cultured by laboratory-scale rotating drum biofilm reactors with synthetic wastewater, were first cut into 10 to 20 μm thick slices using a microtome, and then apportioned into samples representing 3 or 4 layers. The biofilm properties of each layer were investigated by measuring the densities, phospholipid concentrations, and AR18 dye adsorption abilities. The bacterial population distributions and the metabolically active bacterial distributions were studied by plate count methods or a MPN method, and the tetrazolium dye (INT) reduction method, respectively. Based on statistic evaluations, the micro-slicing technique, the procedure for analyzing phospholipid concentrations of biofilms, and the AR18 dye adsorption tests were suitable to be used in biofilm studies. It was found that the densities of biofilms in the bottom layers were 4 to 7 times higher than those in the top layers. For thick biofilms (thickness > 500 μm), the INT active bacteria decreased from 82-89% in the top layers to 5-11% in the bottom layers. The porosities of thick biofilms changed from 83-92% in the top layers to 56-64% in the bottom layers. For thin biofilms (thickness < 500 μm), the porosities of biofilms changed from 72-75% in the top layers to 35-44% in the bottom layers. Highly spatial distributions of bacterial populations, mean pore radius, and specific surface areas were also observed. As a result of these spatial distributions, the ratio of effective diffusivity to diffusivity in the bulk solution also shows a decrease with depth of the biofilm. Assuming biofilm properties are of a uniform distribution may be an over-simplified assumption, valid only in specific cases.

KW - Bacterial activity

KW - Bacterial populations

KW - Biofilm

KW - Density

KW - Dye adsorption

KW - Heterotrophic plate count

KW - MPN method

KW - Microtome

KW - Phospholipid

KW - Porosity

KW - Spatial distribution

UR - http://www.scopus.com/inward/record.url?scp=0028103793&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0028103793&partnerID=8YFLogxK

M3 - Conference article

VL - 29

SP - 335

EP - 344

JO - Water Science and Technology

JF - Water Science and Technology

SN - 0273-1223

IS - 7

ER -