Simulated localized wear of resin luting cements for universal adhesive systems with different curing mode

Akimasa Tsujimoto, Wayne W. Barkmeier, Toshiki Takamizawa, Hidehiko Watanabe, William W. Johnson, Mark A. Latta, Masashi Miyazaki

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

This study evaluated the simulated localized wear of resin luting cements for universal adhesive systems using different curing modes. Five resin luting cements for universal adhesive systems were evaluated and subsequently subjected to wear challenge in a Leinfelder-Suzuki wear simulation device. Overall, 20 specimens from each resin luting cement were photo-cured for 40 s (dual-cure group), and 20 specimens of each material were not photo-cured (chemical-cure group). Simulated localized wear was generated using a stainless steel ball-bearing antagonist in water slurry of polymethylmethacrylate beads. In addition, scanning electron microscopy (SEM) observations of resin luting cements and wear facets were conducted. Significant differences in simulated wear and SEM observations of wear facets were evident among the materials in the dual- and chemical-cure groups. The simulated wear and SEM observations of wear facets of G-CEM LinkForce and Panavia V5 were not influenced by the curing mode. SEM observations of resin luting cements were material dependent. In most cases, dual curing appears to ensure greater wear resistance of resin luting cements than chemical curing alone. The wear resistance of some resin luting cements appears to be material dependent and is not influenced by the curing mode.

Original languageEnglish (US)
Pages (from-to)29-36
Number of pages8
JournalJournal of Oral Science
Volume60
Issue number1
DOIs
StatePublished - Jan 1 2018

Fingerprint

Resin Cements
Adhesives
Electron Scanning Microscopy
Stainless Steel
Polymethyl Methacrylate
Equipment and Supplies
Water

Keywords

  • Curing mode
  • Resin luting cement
  • Simulated localized wear

ASJC Scopus subject areas

  • Dentistry(all)

Cite this

Simulated localized wear of resin luting cements for universal adhesive systems with different curing mode. / Tsujimoto, Akimasa; Barkmeier, Wayne W.; Takamizawa, Toshiki; Watanabe, Hidehiko; Johnson, William W.; Latta, Mark A.; Miyazaki, Masashi.

In: Journal of Oral Science, Vol. 60, No. 1, 01.01.2018, p. 29-36.

Research output: Contribution to journalArticle

Tsujimoto, Akimasa ; Barkmeier, Wayne W. ; Takamizawa, Toshiki ; Watanabe, Hidehiko ; Johnson, William W. ; Latta, Mark A. ; Miyazaki, Masashi. / Simulated localized wear of resin luting cements for universal adhesive systems with different curing mode. In: Journal of Oral Science. 2018 ; Vol. 60, No. 1. pp. 29-36.
@article{6fd22498c2d848cf9605ee65fe289eed,
title = "Simulated localized wear of resin luting cements for universal adhesive systems with different curing mode",
abstract = "This study evaluated the simulated localized wear of resin luting cements for universal adhesive systems using different curing modes. Five resin luting cements for universal adhesive systems were evaluated and subsequently subjected to wear challenge in a Leinfelder-Suzuki wear simulation device. Overall, 20 specimens from each resin luting cement were photo-cured for 40 s (dual-cure group), and 20 specimens of each material were not photo-cured (chemical-cure group). Simulated localized wear was generated using a stainless steel ball-bearing antagonist in water slurry of polymethylmethacrylate beads. In addition, scanning electron microscopy (SEM) observations of resin luting cements and wear facets were conducted. Significant differences in simulated wear and SEM observations of wear facets were evident among the materials in the dual- and chemical-cure groups. The simulated wear and SEM observations of wear facets of G-CEM LinkForce and Panavia V5 were not influenced by the curing mode. SEM observations of resin luting cements were material dependent. In most cases, dual curing appears to ensure greater wear resistance of resin luting cements than chemical curing alone. The wear resistance of some resin luting cements appears to be material dependent and is not influenced by the curing mode.",
keywords = "Curing mode, Resin luting cement, Simulated localized wear",
author = "Akimasa Tsujimoto and Barkmeier, {Wayne W.} and Toshiki Takamizawa and Hidehiko Watanabe and Johnson, {William W.} and Latta, {Mark A.} and Masashi Miyazaki",
year = "2018",
month = "1",
day = "1",
doi = "10.2334/josnusd.16-0815",
language = "English (US)",
volume = "60",
pages = "29--36",
journal = "Journal of oral science",
issn = "1343-4934",
publisher = "Nihon University",
number = "1",

}

TY - JOUR

T1 - Simulated localized wear of resin luting cements for universal adhesive systems with different curing mode

AU - Tsujimoto, Akimasa

AU - Barkmeier, Wayne W.

AU - Takamizawa, Toshiki

AU - Watanabe, Hidehiko

AU - Johnson, William W.

AU - Latta, Mark A.

AU - Miyazaki, Masashi

PY - 2018/1/1

Y1 - 2018/1/1

N2 - This study evaluated the simulated localized wear of resin luting cements for universal adhesive systems using different curing modes. Five resin luting cements for universal adhesive systems were evaluated and subsequently subjected to wear challenge in a Leinfelder-Suzuki wear simulation device. Overall, 20 specimens from each resin luting cement were photo-cured for 40 s (dual-cure group), and 20 specimens of each material were not photo-cured (chemical-cure group). Simulated localized wear was generated using a stainless steel ball-bearing antagonist in water slurry of polymethylmethacrylate beads. In addition, scanning electron microscopy (SEM) observations of resin luting cements and wear facets were conducted. Significant differences in simulated wear and SEM observations of wear facets were evident among the materials in the dual- and chemical-cure groups. The simulated wear and SEM observations of wear facets of G-CEM LinkForce and Panavia V5 were not influenced by the curing mode. SEM observations of resin luting cements were material dependent. In most cases, dual curing appears to ensure greater wear resistance of resin luting cements than chemical curing alone. The wear resistance of some resin luting cements appears to be material dependent and is not influenced by the curing mode.

AB - This study evaluated the simulated localized wear of resin luting cements for universal adhesive systems using different curing modes. Five resin luting cements for universal adhesive systems were evaluated and subsequently subjected to wear challenge in a Leinfelder-Suzuki wear simulation device. Overall, 20 specimens from each resin luting cement were photo-cured for 40 s (dual-cure group), and 20 specimens of each material were not photo-cured (chemical-cure group). Simulated localized wear was generated using a stainless steel ball-bearing antagonist in water slurry of polymethylmethacrylate beads. In addition, scanning electron microscopy (SEM) observations of resin luting cements and wear facets were conducted. Significant differences in simulated wear and SEM observations of wear facets were evident among the materials in the dual- and chemical-cure groups. The simulated wear and SEM observations of wear facets of G-CEM LinkForce and Panavia V5 were not influenced by the curing mode. SEM observations of resin luting cements were material dependent. In most cases, dual curing appears to ensure greater wear resistance of resin luting cements than chemical curing alone. The wear resistance of some resin luting cements appears to be material dependent and is not influenced by the curing mode.

KW - Curing mode

KW - Resin luting cement

KW - Simulated localized wear

UR - http://www.scopus.com/inward/record.url?scp=85044311011&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85044311011&partnerID=8YFLogxK

U2 - 10.2334/josnusd.16-0815

DO - 10.2334/josnusd.16-0815

M3 - Article

C2 - 29375099

AN - SCOPUS:85044311011

VL - 60

SP - 29

EP - 36

JO - Journal of oral science

JF - Journal of oral science

SN - 1343-4934

IS - 1

ER -