SILICIDE FORMATION BY HIGH DOSE TRANSITION METAL IMPLANTS INTO Si.

F. H. Sanchez, F. Namavar, J. I. Budnick, A. Fasihudin, H. C. Hayden

Research output: Chapter in Book/Report/Conference proceedingConference contribution

28 Citations (Scopus)

Abstract

We report preliminary results of a study on silicide formation by means of high dose transition metal implants into Si (100) single crystals. 100 keV Cr** plus , Fe** plus , Co** plus and Ni** plus were implanted at room temperature. For the Cr** plus , Fe** plus and Ni** plus implants, no silicide formation was observed after implantation. However, both Rutherford Backscattering Spectrometry (RBS) and X-Ray Diffraction (XRD) results clearly indicated the existence of CrSi//2 after the Cr-Si samples were annealed 4 hours at 550 degree C. In the case of the Fe** plus and Ni** plus implants, FeSi//2 and NiSi//2 were identified by XRD after annealing the implanted samples half an hour at 400 degree C. A layer of CoSi of about 1000 Angstrom was observed in the as-implanted Co-Si samples by both RBS and XRD. Ni** plus ions accelerated to 150 keV were implanted at 350 degree C. A much broader distribution and higher retention of Ni was obtained in this case, showing evidence of long range atomic diffusion. NiSi and polycrystalline silicon were observed by XRD in the as-implanted samples. The possibility of high dose ion implantation as a suitable technique for producing transition metal silicides is discussed.

Original languageEnglish (US)
Title of host publicationMaterials Research Society Symposia Proceedings
PublisherMaterials Research Soc
Pages439-444
Number of pages6
ISBN (Print)0931837162
StatePublished - Dec 1 1986

Publication series

NameMaterials Research Society Symposia Proceedings
Volume51
ISSN (Print)0272-9172

Fingerprint

Transition metals
X ray diffraction
Rutherford backscattering spectroscopy
Spectrometry
Silicides
Polysilicon
Ion implantation
Single crystals
Annealing
Ions
Metal implants
Temperature

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Sanchez, F. H., Namavar, F., Budnick, J. I., Fasihudin, A., & Hayden, H. C. (1986). SILICIDE FORMATION BY HIGH DOSE TRANSITION METAL IMPLANTS INTO Si. In Materials Research Society Symposia Proceedings (pp. 439-444). (Materials Research Society Symposia Proceedings; Vol. 51). Materials Research Soc.

SILICIDE FORMATION BY HIGH DOSE TRANSITION METAL IMPLANTS INTO Si. / Sanchez, F. H.; Namavar, F.; Budnick, J. I.; Fasihudin, A.; Hayden, H. C.

Materials Research Society Symposia Proceedings. Materials Research Soc, 1986. p. 439-444 (Materials Research Society Symposia Proceedings; Vol. 51).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sanchez, FH, Namavar, F, Budnick, JI, Fasihudin, A & Hayden, HC 1986, SILICIDE FORMATION BY HIGH DOSE TRANSITION METAL IMPLANTS INTO Si. in Materials Research Society Symposia Proceedings. Materials Research Society Symposia Proceedings, vol. 51, Materials Research Soc, pp. 439-444.
Sanchez FH, Namavar F, Budnick JI, Fasihudin A, Hayden HC. SILICIDE FORMATION BY HIGH DOSE TRANSITION METAL IMPLANTS INTO Si. In Materials Research Society Symposia Proceedings. Materials Research Soc. 1986. p. 439-444. (Materials Research Society Symposia Proceedings).
Sanchez, F. H. ; Namavar, F. ; Budnick, J. I. ; Fasihudin, A. ; Hayden, H. C. / SILICIDE FORMATION BY HIGH DOSE TRANSITION METAL IMPLANTS INTO Si. Materials Research Society Symposia Proceedings. Materials Research Soc, 1986. pp. 439-444 (Materials Research Society Symposia Proceedings).
@inproceedings{216f083b7bd34bfca0e409bbec0cd2aa,
title = "SILICIDE FORMATION BY HIGH DOSE TRANSITION METAL IMPLANTS INTO Si.",
abstract = "We report preliminary results of a study on silicide formation by means of high dose transition metal implants into Si (100) single crystals. 100 keV Cr** plus , Fe** plus , Co** plus and Ni** plus were implanted at room temperature. For the Cr** plus , Fe** plus and Ni** plus implants, no silicide formation was observed after implantation. However, both Rutherford Backscattering Spectrometry (RBS) and X-Ray Diffraction (XRD) results clearly indicated the existence of CrSi//2 after the Cr-Si samples were annealed 4 hours at 550 degree C. In the case of the Fe** plus and Ni** plus implants, FeSi//2 and NiSi//2 were identified by XRD after annealing the implanted samples half an hour at 400 degree C. A layer of CoSi of about 1000 Angstrom was observed in the as-implanted Co-Si samples by both RBS and XRD. Ni** plus ions accelerated to 150 keV were implanted at 350 degree C. A much broader distribution and higher retention of Ni was obtained in this case, showing evidence of long range atomic diffusion. NiSi and polycrystalline silicon were observed by XRD in the as-implanted samples. The possibility of high dose ion implantation as a suitable technique for producing transition metal silicides is discussed.",
author = "Sanchez, {F. H.} and F. Namavar and Budnick, {J. I.} and A. Fasihudin and Hayden, {H. C.}",
year = "1986",
month = "12",
day = "1",
language = "English (US)",
isbn = "0931837162",
series = "Materials Research Society Symposia Proceedings",
publisher = "Materials Research Soc",
pages = "439--444",
booktitle = "Materials Research Society Symposia Proceedings",

}

TY - GEN

T1 - SILICIDE FORMATION BY HIGH DOSE TRANSITION METAL IMPLANTS INTO Si.

AU - Sanchez, F. H.

AU - Namavar, F.

AU - Budnick, J. I.

AU - Fasihudin, A.

AU - Hayden, H. C.

PY - 1986/12/1

Y1 - 1986/12/1

N2 - We report preliminary results of a study on silicide formation by means of high dose transition metal implants into Si (100) single crystals. 100 keV Cr** plus , Fe** plus , Co** plus and Ni** plus were implanted at room temperature. For the Cr** plus , Fe** plus and Ni** plus implants, no silicide formation was observed after implantation. However, both Rutherford Backscattering Spectrometry (RBS) and X-Ray Diffraction (XRD) results clearly indicated the existence of CrSi//2 after the Cr-Si samples were annealed 4 hours at 550 degree C. In the case of the Fe** plus and Ni** plus implants, FeSi//2 and NiSi//2 were identified by XRD after annealing the implanted samples half an hour at 400 degree C. A layer of CoSi of about 1000 Angstrom was observed in the as-implanted Co-Si samples by both RBS and XRD. Ni** plus ions accelerated to 150 keV were implanted at 350 degree C. A much broader distribution and higher retention of Ni was obtained in this case, showing evidence of long range atomic diffusion. NiSi and polycrystalline silicon were observed by XRD in the as-implanted samples. The possibility of high dose ion implantation as a suitable technique for producing transition metal silicides is discussed.

AB - We report preliminary results of a study on silicide formation by means of high dose transition metal implants into Si (100) single crystals. 100 keV Cr** plus , Fe** plus , Co** plus and Ni** plus were implanted at room temperature. For the Cr** plus , Fe** plus and Ni** plus implants, no silicide formation was observed after implantation. However, both Rutherford Backscattering Spectrometry (RBS) and X-Ray Diffraction (XRD) results clearly indicated the existence of CrSi//2 after the Cr-Si samples were annealed 4 hours at 550 degree C. In the case of the Fe** plus and Ni** plus implants, FeSi//2 and NiSi//2 were identified by XRD after annealing the implanted samples half an hour at 400 degree C. A layer of CoSi of about 1000 Angstrom was observed in the as-implanted Co-Si samples by both RBS and XRD. Ni** plus ions accelerated to 150 keV were implanted at 350 degree C. A much broader distribution and higher retention of Ni was obtained in this case, showing evidence of long range atomic diffusion. NiSi and polycrystalline silicon were observed by XRD in the as-implanted samples. The possibility of high dose ion implantation as a suitable technique for producing transition metal silicides is discussed.

UR - http://www.scopus.com/inward/record.url?scp=0022907821&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022907821&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0022907821

SN - 0931837162

T3 - Materials Research Society Symposia Proceedings

SP - 439

EP - 444

BT - Materials Research Society Symposia Proceedings

PB - Materials Research Soc

ER -