Shock-induced ultrafast SHS reactions

N. F J Van Rensburg, Hendrik J Viljoen

Research output: Contribution to journalArticle

Abstract

Mixtures of reactive powders can be ignited in several ways. These systems have high activation energies and significant preheating is required. Traditionally conduction has been considered as the main form of preheating and self-propagating velocities of the order of a few millimeters to a few centimeters per second are typical. Ultrafast modes of propagation are observed through the application of initial pressure and particle velocity to the system, which cause significant heating by compression. The model also includes the compaction of porous preforms. The constitutive relations have been amended to accommodate yielding and dilatation. Dissipative forces contribute to preheating and replace thermal conduction as the primary mode of activation. The model is pseudo-homogeneous insofar as no distinction is made between physical properties of different species, as well as differences in their response to shock waves (e.g., local differences in particle velocities).

Original languageEnglish (US)
Pages (from-to)335-347
Number of pages13
JournalJournal of Materials Synthesis and Processing
Volume7
Issue number6
DOIs
StatePublished - Jan 1 1999

Fingerprint

Preheating
Compaction
Shock waves
Powders
Activation energy
Physical properties
Chemical activation
Heating

ASJC Scopus subject areas

  • Materials Science(all)

Cite this

Shock-induced ultrafast SHS reactions. / Van Rensburg, N. F J; Viljoen, Hendrik J.

In: Journal of Materials Synthesis and Processing, Vol. 7, No. 6, 01.01.1999, p. 335-347.

Research output: Contribution to journalArticle

@article{da85c2f876654c749803d222b542b3d6,
title = "Shock-induced ultrafast SHS reactions",
abstract = "Mixtures of reactive powders can be ignited in several ways. These systems have high activation energies and significant preheating is required. Traditionally conduction has been considered as the main form of preheating and self-propagating velocities of the order of a few millimeters to a few centimeters per second are typical. Ultrafast modes of propagation are observed through the application of initial pressure and particle velocity to the system, which cause significant heating by compression. The model also includes the compaction of porous preforms. The constitutive relations have been amended to accommodate yielding and dilatation. Dissipative forces contribute to preheating and replace thermal conduction as the primary mode of activation. The model is pseudo-homogeneous insofar as no distinction is made between physical properties of different species, as well as differences in their response to shock waves (e.g., local differences in particle velocities).",
author = "{Van Rensburg}, {N. F J} and Viljoen, {Hendrik J}",
year = "1999",
month = "1",
day = "1",
doi = "10.1023/A:1021809812390",
language = "English (US)",
volume = "7",
pages = "335--347",
journal = "Journal of Materials Synthesis and Processing",
issn = "1064-7562",
publisher = "Springer GmbH & Co, Auslieferungs-Gesellschaf",
number = "6",

}

TY - JOUR

T1 - Shock-induced ultrafast SHS reactions

AU - Van Rensburg, N. F J

AU - Viljoen, Hendrik J

PY - 1999/1/1

Y1 - 1999/1/1

N2 - Mixtures of reactive powders can be ignited in several ways. These systems have high activation energies and significant preheating is required. Traditionally conduction has been considered as the main form of preheating and self-propagating velocities of the order of a few millimeters to a few centimeters per second are typical. Ultrafast modes of propagation are observed through the application of initial pressure and particle velocity to the system, which cause significant heating by compression. The model also includes the compaction of porous preforms. The constitutive relations have been amended to accommodate yielding and dilatation. Dissipative forces contribute to preheating and replace thermal conduction as the primary mode of activation. The model is pseudo-homogeneous insofar as no distinction is made between physical properties of different species, as well as differences in their response to shock waves (e.g., local differences in particle velocities).

AB - Mixtures of reactive powders can be ignited in several ways. These systems have high activation energies and significant preheating is required. Traditionally conduction has been considered as the main form of preheating and self-propagating velocities of the order of a few millimeters to a few centimeters per second are typical. Ultrafast modes of propagation are observed through the application of initial pressure and particle velocity to the system, which cause significant heating by compression. The model also includes the compaction of porous preforms. The constitutive relations have been amended to accommodate yielding and dilatation. Dissipative forces contribute to preheating and replace thermal conduction as the primary mode of activation. The model is pseudo-homogeneous insofar as no distinction is made between physical properties of different species, as well as differences in their response to shock waves (e.g., local differences in particle velocities).

UR - http://www.scopus.com/inward/record.url?scp=0033223836&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033223836&partnerID=8YFLogxK

U2 - 10.1023/A:1021809812390

DO - 10.1023/A:1021809812390

M3 - Article

VL - 7

SP - 335

EP - 347

JO - Journal of Materials Synthesis and Processing

JF - Journal of Materials Synthesis and Processing

SN - 1064-7562

IS - 6

ER -