Response surface methodology for salmonella inactivation during extrusion processing of oat flour

Tushar Verma, Xinyao Wei, Soon Kiatlau, Andreia Bianchini, Kent M Eskridge, Jayne Stratton, Nathan M. Anderson, Harshavardhan Thippareddi, Jeyamkondan Subbiah

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

An increase in the number of foodborne outbreaks and recalls due to Salmonella in low-moisture foods has resulted in the need for the development and validation of process controls to ensure their microbiological safety. Furthermore, the Food Safety Modernization Act Preventive Controls for Human Food final rule requires food processors to validate their process controls to ensure food safety. The objective of this study was to develop a response surface model to predict Salmonella inactivation in oat flour, as affected by moisture, fat content, screw speed, and temperature. Oat flour was adjusted to different moisture (14 to 26% wet basis) and fat (5 to 15% [w/w]) contents and was then inoculated with a five-strain cocktail of Salmonella. Inoculated material was extruded through a single-screw extruder running at different screw speeds (75 to 225 rpm) and temperatures (65 to 85°C), without a die. Once steady-state conditions were attained, extruded samples were collected, cooled, and stored under refrigeration, and Salmonella survivors were enumerated. A split-plot central composite second-order response surface design was used, with the central point replicated six times. Temperature showed a significant (P < 0.0005) positive effect on microbial reduction. Moisture content showed significant linear (P=0.0014) and quadratic (P=0.0005) effects, whereas higher fat content showed a significant (P < 0.0001) protective effect on Salmonella destruction. The screw speed did not play a major role in inactivating Salmonella, but it had a significant (P=0.0004) interactive effect with temperature. Results indicated that a>.5.5-log reduction was achieved in oat flour extruded at a temperature above 85°C at all moisture and fat contents evaluated at a screw speed of 150 rpm. The developed response surface model can be used to identify the extrusion process conditions to achieve a desired reduction of Salmonella based on the moisture and fat contents of the product.

Original languageEnglish (US)
Pages (from-to)815-826
Number of pages12
JournalJournal of food protection
Volume81
Issue number5
DOIs
StatePublished - May 1 2018

Fingerprint

oat flour
Flour
response surface methodology
extrusion
Salmonella
inactivation
screws
Fats
Temperature
Food Safety
lipid content
process control
Food
temperature
water content
Refrigeration
extruders
microbiological quality
refrigeration
Social Change

Keywords

  • Low-moisture foods
  • Microbial challenge study
  • Process validation
  • Product composition
  • Screw speed
  • Singlescrew extrusion

ASJC Scopus subject areas

  • Food Science
  • Microbiology

Cite this

Response surface methodology for salmonella inactivation during extrusion processing of oat flour. / Verma, Tushar; Wei, Xinyao; Kiatlau, Soon; Bianchini, Andreia; Eskridge, Kent M; Stratton, Jayne; Anderson, Nathan M.; Thippareddi, Harshavardhan; Subbiah, Jeyamkondan.

In: Journal of food protection, Vol. 81, No. 5, 01.05.2018, p. 815-826.

Research output: Contribution to journalArticle

Verma, T, Wei, X, Kiatlau, S, Bianchini, A, Eskridge, KM, Stratton, J, Anderson, NM, Thippareddi, H & Subbiah, J 2018, 'Response surface methodology for salmonella inactivation during extrusion processing of oat flour', Journal of food protection, vol. 81, no. 5, pp. 815-826. https://doi.org/10.4315/0362-028X.JFP-17-347
Verma, Tushar ; Wei, Xinyao ; Kiatlau, Soon ; Bianchini, Andreia ; Eskridge, Kent M ; Stratton, Jayne ; Anderson, Nathan M. ; Thippareddi, Harshavardhan ; Subbiah, Jeyamkondan. / Response surface methodology for salmonella inactivation during extrusion processing of oat flour. In: Journal of food protection. 2018 ; Vol. 81, No. 5. pp. 815-826.
@article{0680f4872a40420d980ea199f4997e0e,
title = "Response surface methodology for salmonella inactivation during extrusion processing of oat flour",
abstract = "An increase in the number of foodborne outbreaks and recalls due to Salmonella in low-moisture foods has resulted in the need for the development and validation of process controls to ensure their microbiological safety. Furthermore, the Food Safety Modernization Act Preventive Controls for Human Food final rule requires food processors to validate their process controls to ensure food safety. The objective of this study was to develop a response surface model to predict Salmonella inactivation in oat flour, as affected by moisture, fat content, screw speed, and temperature. Oat flour was adjusted to different moisture (14 to 26{\%} wet basis) and fat (5 to 15{\%} [w/w]) contents and was then inoculated with a five-strain cocktail of Salmonella. Inoculated material was extruded through a single-screw extruder running at different screw speeds (75 to 225 rpm) and temperatures (65 to 85°C), without a die. Once steady-state conditions were attained, extruded samples were collected, cooled, and stored under refrigeration, and Salmonella survivors were enumerated. A split-plot central composite second-order response surface design was used, with the central point replicated six times. Temperature showed a significant (P < 0.0005) positive effect on microbial reduction. Moisture content showed significant linear (P=0.0014) and quadratic (P=0.0005) effects, whereas higher fat content showed a significant (P < 0.0001) protective effect on Salmonella destruction. The screw speed did not play a major role in inactivating Salmonella, but it had a significant (P=0.0004) interactive effect with temperature. Results indicated that a>.5.5-log reduction was achieved in oat flour extruded at a temperature above 85°C at all moisture and fat contents evaluated at a screw speed of 150 rpm. The developed response surface model can be used to identify the extrusion process conditions to achieve a desired reduction of Salmonella based on the moisture and fat contents of the product.",
keywords = "Low-moisture foods, Microbial challenge study, Process validation, Product composition, Screw speed, Singlescrew extrusion",
author = "Tushar Verma and Xinyao Wei and Soon Kiatlau and Andreia Bianchini and Eskridge, {Kent M} and Jayne Stratton and Anderson, {Nathan M.} and Harshavardhan Thippareddi and Jeyamkondan Subbiah",
year = "2018",
month = "5",
day = "1",
doi = "10.4315/0362-028X.JFP-17-347",
language = "English (US)",
volume = "81",
pages = "815--826",
journal = "Journal of Food Protection",
issn = "0362-028X",
publisher = "International Association for Food Protection",
number = "5",

}

TY - JOUR

T1 - Response surface methodology for salmonella inactivation during extrusion processing of oat flour

AU - Verma, Tushar

AU - Wei, Xinyao

AU - Kiatlau, Soon

AU - Bianchini, Andreia

AU - Eskridge, Kent M

AU - Stratton, Jayne

AU - Anderson, Nathan M.

AU - Thippareddi, Harshavardhan

AU - Subbiah, Jeyamkondan

PY - 2018/5/1

Y1 - 2018/5/1

N2 - An increase in the number of foodborne outbreaks and recalls due to Salmonella in low-moisture foods has resulted in the need for the development and validation of process controls to ensure their microbiological safety. Furthermore, the Food Safety Modernization Act Preventive Controls for Human Food final rule requires food processors to validate their process controls to ensure food safety. The objective of this study was to develop a response surface model to predict Salmonella inactivation in oat flour, as affected by moisture, fat content, screw speed, and temperature. Oat flour was adjusted to different moisture (14 to 26% wet basis) and fat (5 to 15% [w/w]) contents and was then inoculated with a five-strain cocktail of Salmonella. Inoculated material was extruded through a single-screw extruder running at different screw speeds (75 to 225 rpm) and temperatures (65 to 85°C), without a die. Once steady-state conditions were attained, extruded samples were collected, cooled, and stored under refrigeration, and Salmonella survivors were enumerated. A split-plot central composite second-order response surface design was used, with the central point replicated six times. Temperature showed a significant (P < 0.0005) positive effect on microbial reduction. Moisture content showed significant linear (P=0.0014) and quadratic (P=0.0005) effects, whereas higher fat content showed a significant (P < 0.0001) protective effect on Salmonella destruction. The screw speed did not play a major role in inactivating Salmonella, but it had a significant (P=0.0004) interactive effect with temperature. Results indicated that a>.5.5-log reduction was achieved in oat flour extruded at a temperature above 85°C at all moisture and fat contents evaluated at a screw speed of 150 rpm. The developed response surface model can be used to identify the extrusion process conditions to achieve a desired reduction of Salmonella based on the moisture and fat contents of the product.

AB - An increase in the number of foodborne outbreaks and recalls due to Salmonella in low-moisture foods has resulted in the need for the development and validation of process controls to ensure their microbiological safety. Furthermore, the Food Safety Modernization Act Preventive Controls for Human Food final rule requires food processors to validate their process controls to ensure food safety. The objective of this study was to develop a response surface model to predict Salmonella inactivation in oat flour, as affected by moisture, fat content, screw speed, and temperature. Oat flour was adjusted to different moisture (14 to 26% wet basis) and fat (5 to 15% [w/w]) contents and was then inoculated with a five-strain cocktail of Salmonella. Inoculated material was extruded through a single-screw extruder running at different screw speeds (75 to 225 rpm) and temperatures (65 to 85°C), without a die. Once steady-state conditions were attained, extruded samples were collected, cooled, and stored under refrigeration, and Salmonella survivors were enumerated. A split-plot central composite second-order response surface design was used, with the central point replicated six times. Temperature showed a significant (P < 0.0005) positive effect on microbial reduction. Moisture content showed significant linear (P=0.0014) and quadratic (P=0.0005) effects, whereas higher fat content showed a significant (P < 0.0001) protective effect on Salmonella destruction. The screw speed did not play a major role in inactivating Salmonella, but it had a significant (P=0.0004) interactive effect with temperature. Results indicated that a>.5.5-log reduction was achieved in oat flour extruded at a temperature above 85°C at all moisture and fat contents evaluated at a screw speed of 150 rpm. The developed response surface model can be used to identify the extrusion process conditions to achieve a desired reduction of Salmonella based on the moisture and fat contents of the product.

KW - Low-moisture foods

KW - Microbial challenge study

KW - Process validation

KW - Product composition

KW - Screw speed

KW - Singlescrew extrusion

UR - http://www.scopus.com/inward/record.url?scp=85045418043&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85045418043&partnerID=8YFLogxK

U2 - 10.4315/0362-028X.JFP-17-347

DO - 10.4315/0362-028X.JFP-17-347

M3 - Article

VL - 81

SP - 815

EP - 826

JO - Journal of Food Protection

JF - Journal of Food Protection

SN - 0362-028X

IS - 5

ER -