Removal of Pb 2+ from aqueous solutions by a high-efficiency resin

Hao Guo, Yongzheng Ren, Xueliang Sun, Yadi Xu, Xuemei Li, Tian C Zhang, Jianxiong Kang, Dongqi Liu

Research output: Contribution to journalArticle

24 Citations (Scopus)

Abstract

The removal of Pb 2+ from aqueous solution by 732 cation-exchange resin in sodium type (732-CR) has been studied in batch experiments at varying pH (2.0-8.0), Pb 2+ concentration (50-200 mg/L), contact time (5-300 min), temperature (288-308 K) and resin dose (0.125-0.75 g/L). The experimental data show that the ion-exchange process was dependent on pH and temperature, the optimal exchange capacity was found at pH 4.0, and higher temperature was beneficial to lead sorption. Kinetic data indicate that the ion-exchange process followed a pseudo-first order model. The equilibrium exchange capacity could be reached at approximately 4 h, and the maximum sorption capacity of Pb 2+ at pH 4.0 was 396.8 mg/g resin. The equilibrium data were evaluated with Langmuir and Freundlich model, and were best fitted with Langmuir model. The thermodynamic parameters for removal of Pb 2+ indicate that the reaction was spontaneous and endothermic. Additionally, column tests were conducted by using both synthetic solution and effluents from lead battery industry. The regeneration of resin was performed for two sorption-regeneration cycles by 1 M NaOH, and the results show that effective regeneration was achieved by this method.

Original languageEnglish (US)
Pages (from-to)660-667
Number of pages8
JournalApplied Surface Science
Volume283
DOIs
StatePublished - Oct 15 2013

Fingerprint

resins
Sorption
Resins
regeneration
sorption
aqueous solutions
Ion exchange
Cation Exchange Resins
Temperature
Effluents
effluents
Sodium
Thermodynamics
electric batteries
ions
Kinetics
Lead
Positive ions
industries
sodium

Keywords

  • Equilibrium
  • Ion-exchange
  • Kinetic
  • Wastewater

ASJC Scopus subject areas

  • Surfaces, Coatings and Films

Cite this

Removal of Pb 2+ from aqueous solutions by a high-efficiency resin . / Guo, Hao; Ren, Yongzheng; Sun, Xueliang; Xu, Yadi; Li, Xuemei; Zhang, Tian C; Kang, Jianxiong; Liu, Dongqi.

In: Applied Surface Science, Vol. 283, 15.10.2013, p. 660-667.

Research output: Contribution to journalArticle

Guo, Hao ; Ren, Yongzheng ; Sun, Xueliang ; Xu, Yadi ; Li, Xuemei ; Zhang, Tian C ; Kang, Jianxiong ; Liu, Dongqi. / Removal of Pb 2+ from aqueous solutions by a high-efficiency resin In: Applied Surface Science. 2013 ; Vol. 283. pp. 660-667.
@article{90c95b2d6fff49bcbb57eeaab3a42073,
title = "Removal of Pb 2+ from aqueous solutions by a high-efficiency resin",
abstract = "The removal of Pb 2+ from aqueous solution by 732 cation-exchange resin in sodium type (732-CR) has been studied in batch experiments at varying pH (2.0-8.0), Pb 2+ concentration (50-200 mg/L), contact time (5-300 min), temperature (288-308 K) and resin dose (0.125-0.75 g/L). The experimental data show that the ion-exchange process was dependent on pH and temperature, the optimal exchange capacity was found at pH 4.0, and higher temperature was beneficial to lead sorption. Kinetic data indicate that the ion-exchange process followed a pseudo-first order model. The equilibrium exchange capacity could be reached at approximately 4 h, and the maximum sorption capacity of Pb 2+ at pH 4.0 was 396.8 mg/g resin. The equilibrium data were evaluated with Langmuir and Freundlich model, and were best fitted with Langmuir model. The thermodynamic parameters for removal of Pb 2+ indicate that the reaction was spontaneous and endothermic. Additionally, column tests were conducted by using both synthetic solution and effluents from lead battery industry. The regeneration of resin was performed for two sorption-regeneration cycles by 1 M NaOH, and the results show that effective regeneration was achieved by this method.",
keywords = "Equilibrium, Ion-exchange, Kinetic, Wastewater",
author = "Hao Guo and Yongzheng Ren and Xueliang Sun and Yadi Xu and Xuemei Li and Zhang, {Tian C} and Jianxiong Kang and Dongqi Liu",
year = "2013",
month = "10",
day = "15",
doi = "10.1016/j.apsusc.2013.06.161",
language = "English (US)",
volume = "283",
pages = "660--667",
journal = "Applied Surface Science",
issn = "0169-4332",
publisher = "Elsevier",

}

TY - JOUR

T1 - Removal of Pb 2+ from aqueous solutions by a high-efficiency resin

AU - Guo, Hao

AU - Ren, Yongzheng

AU - Sun, Xueliang

AU - Xu, Yadi

AU - Li, Xuemei

AU - Zhang, Tian C

AU - Kang, Jianxiong

AU - Liu, Dongqi

PY - 2013/10/15

Y1 - 2013/10/15

N2 - The removal of Pb 2+ from aqueous solution by 732 cation-exchange resin in sodium type (732-CR) has been studied in batch experiments at varying pH (2.0-8.0), Pb 2+ concentration (50-200 mg/L), contact time (5-300 min), temperature (288-308 K) and resin dose (0.125-0.75 g/L). The experimental data show that the ion-exchange process was dependent on pH and temperature, the optimal exchange capacity was found at pH 4.0, and higher temperature was beneficial to lead sorption. Kinetic data indicate that the ion-exchange process followed a pseudo-first order model. The equilibrium exchange capacity could be reached at approximately 4 h, and the maximum sorption capacity of Pb 2+ at pH 4.0 was 396.8 mg/g resin. The equilibrium data were evaluated with Langmuir and Freundlich model, and were best fitted with Langmuir model. The thermodynamic parameters for removal of Pb 2+ indicate that the reaction was spontaneous and endothermic. Additionally, column tests were conducted by using both synthetic solution and effluents from lead battery industry. The regeneration of resin was performed for two sorption-regeneration cycles by 1 M NaOH, and the results show that effective regeneration was achieved by this method.

AB - The removal of Pb 2+ from aqueous solution by 732 cation-exchange resin in sodium type (732-CR) has been studied in batch experiments at varying pH (2.0-8.0), Pb 2+ concentration (50-200 mg/L), contact time (5-300 min), temperature (288-308 K) and resin dose (0.125-0.75 g/L). The experimental data show that the ion-exchange process was dependent on pH and temperature, the optimal exchange capacity was found at pH 4.0, and higher temperature was beneficial to lead sorption. Kinetic data indicate that the ion-exchange process followed a pseudo-first order model. The equilibrium exchange capacity could be reached at approximately 4 h, and the maximum sorption capacity of Pb 2+ at pH 4.0 was 396.8 mg/g resin. The equilibrium data were evaluated with Langmuir and Freundlich model, and were best fitted with Langmuir model. The thermodynamic parameters for removal of Pb 2+ indicate that the reaction was spontaneous and endothermic. Additionally, column tests were conducted by using both synthetic solution and effluents from lead battery industry. The regeneration of resin was performed for two sorption-regeneration cycles by 1 M NaOH, and the results show that effective regeneration was achieved by this method.

KW - Equilibrium

KW - Ion-exchange

KW - Kinetic

KW - Wastewater

UR - http://www.scopus.com/inward/record.url?scp=84883165425&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84883165425&partnerID=8YFLogxK

U2 - 10.1016/j.apsusc.2013.06.161

DO - 10.1016/j.apsusc.2013.06.161

M3 - Article

VL - 283

SP - 660

EP - 667

JO - Applied Surface Science

JF - Applied Surface Science

SN - 0169-4332

ER -