Reliability analysis of NU girders designed using AASHTO LRFD

George Morcous, Amin Akhnoukh

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

The University of Nebraska's I-girders, known as NU girders, are precast prestressed concrete girders that have unique characteristics. NU girders have a wide top flange (48.2 in) to provide a better platform for workers and shorter span for deck; and a wide and thick bottom flange (38.4 in) to accommodate a large number of prestressing strands. The depth of NU girders varies from 20.3 in. to 63.6 in. to allow the construction of bridges. that spans up to 210 ft with a high economic competency. These unique characteristics significantly affect the flexure and shear resistance of NU girders, and consequently, influence their reliability when the uncertainty of loads, material properties, and fabrication parameters are considered. This paper presents the reliability analysis of NU girders designed using the strength I limit state of the AASHTO LRFD bridge design specifications. Resistance models are developed for several types of NU girders (NU1600, NU1800, and NU2000) and considering different combinations of girder span (120 to 200 ft) and girder spacing (8 to 12 ft). The variability of flexure and shear resistance is calculated based on the uncertainty of: i) material properties, such as cast-in-place concrete strength, precast concrete initial and final strength, reinforcing steel yield strength, and prestressing strands ultimate strength; and ii) fabrication parameters, such as the dimensions of concrete sections, area of reinforcing steel, and area of prestressing strands. Load models are developed to account for the uncertainty in dead load, wearing surface load, live load, and impact load. The calculated reliability indices are examined for consistency and compared against the target reliability index for various combinations of girder type, span, and spacing.

Original languageEnglish (US)
Title of host publicationNew Horizons and Better Practices
DOIs
StatePublished - Dec 1 2007
Event2007 Structures Congress: New Horizons and Better Practices - Long Beach, CA, United States
Duration: May 16 2007May 19 2007

Publication series

NameNew Horizons and Better Practices

Conference

Conference2007 Structures Congress: New Horizons and Better Practices
CountryUnited States
CityLong Beach, CA
Period5/16/075/19/07

Fingerprint

Beams and girders
Reliability analysis
Prestressing
Precast concrete
Flanges
Materials properties
Concrete beams and girders
Cast in place concrete
Fabrication
Steel
Prestressed concrete
Yield stress
Concretes
Specifications
Economics
Uncertainty

ASJC Scopus subject areas

  • Computer Science (miscellaneous)

Cite this

Morcous, G., & Akhnoukh, A. (2007). Reliability analysis of NU girders designed using AASHTO LRFD. In New Horizons and Better Practices (New Horizons and Better Practices). https://doi.org/10.1061/40946(248)81

Reliability analysis of NU girders designed using AASHTO LRFD. / Morcous, George; Akhnoukh, Amin.

New Horizons and Better Practices. 2007. (New Horizons and Better Practices).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Morcous, G & Akhnoukh, A 2007, Reliability analysis of NU girders designed using AASHTO LRFD. in New Horizons and Better Practices. New Horizons and Better Practices, 2007 Structures Congress: New Horizons and Better Practices, Long Beach, CA, United States, 5/16/07. https://doi.org/10.1061/40946(248)81
Morcous G, Akhnoukh A. Reliability analysis of NU girders designed using AASHTO LRFD. In New Horizons and Better Practices. 2007. (New Horizons and Better Practices). https://doi.org/10.1061/40946(248)81
Morcous, George ; Akhnoukh, Amin. / Reliability analysis of NU girders designed using AASHTO LRFD. New Horizons and Better Practices. 2007. (New Horizons and Better Practices).
@inproceedings{bb1a9384d47e4e84ad6167e9cab6b1ff,
title = "Reliability analysis of NU girders designed using AASHTO LRFD",
abstract = "The University of Nebraska's I-girders, known as NU girders, are precast prestressed concrete girders that have unique characteristics. NU girders have a wide top flange (48.2 in) to provide a better platform for workers and shorter span for deck; and a wide and thick bottom flange (38.4 in) to accommodate a large number of prestressing strands. The depth of NU girders varies from 20.3 in. to 63.6 in. to allow the construction of bridges. that spans up to 210 ft with a high economic competency. These unique characteristics significantly affect the flexure and shear resistance of NU girders, and consequently, influence their reliability when the uncertainty of loads, material properties, and fabrication parameters are considered. This paper presents the reliability analysis of NU girders designed using the strength I limit state of the AASHTO LRFD bridge design specifications. Resistance models are developed for several types of NU girders (NU1600, NU1800, and NU2000) and considering different combinations of girder span (120 to 200 ft) and girder spacing (8 to 12 ft). The variability of flexure and shear resistance is calculated based on the uncertainty of: i) material properties, such as cast-in-place concrete strength, precast concrete initial and final strength, reinforcing steel yield strength, and prestressing strands ultimate strength; and ii) fabrication parameters, such as the dimensions of concrete sections, area of reinforcing steel, and area of prestressing strands. Load models are developed to account for the uncertainty in dead load, wearing surface load, live load, and impact load. The calculated reliability indices are examined for consistency and compared against the target reliability index for various combinations of girder type, span, and spacing.",
author = "George Morcous and Amin Akhnoukh",
year = "2007",
month = "12",
day = "1",
doi = "10.1061/40946(248)81",
language = "English (US)",
isbn = "0784409463",
series = "New Horizons and Better Practices",
booktitle = "New Horizons and Better Practices",

}

TY - GEN

T1 - Reliability analysis of NU girders designed using AASHTO LRFD

AU - Morcous, George

AU - Akhnoukh, Amin

PY - 2007/12/1

Y1 - 2007/12/1

N2 - The University of Nebraska's I-girders, known as NU girders, are precast prestressed concrete girders that have unique characteristics. NU girders have a wide top flange (48.2 in) to provide a better platform for workers and shorter span for deck; and a wide and thick bottom flange (38.4 in) to accommodate a large number of prestressing strands. The depth of NU girders varies from 20.3 in. to 63.6 in. to allow the construction of bridges. that spans up to 210 ft with a high economic competency. These unique characteristics significantly affect the flexure and shear resistance of NU girders, and consequently, influence their reliability when the uncertainty of loads, material properties, and fabrication parameters are considered. This paper presents the reliability analysis of NU girders designed using the strength I limit state of the AASHTO LRFD bridge design specifications. Resistance models are developed for several types of NU girders (NU1600, NU1800, and NU2000) and considering different combinations of girder span (120 to 200 ft) and girder spacing (8 to 12 ft). The variability of flexure and shear resistance is calculated based on the uncertainty of: i) material properties, such as cast-in-place concrete strength, precast concrete initial and final strength, reinforcing steel yield strength, and prestressing strands ultimate strength; and ii) fabrication parameters, such as the dimensions of concrete sections, area of reinforcing steel, and area of prestressing strands. Load models are developed to account for the uncertainty in dead load, wearing surface load, live load, and impact load. The calculated reliability indices are examined for consistency and compared against the target reliability index for various combinations of girder type, span, and spacing.

AB - The University of Nebraska's I-girders, known as NU girders, are precast prestressed concrete girders that have unique characteristics. NU girders have a wide top flange (48.2 in) to provide a better platform for workers and shorter span for deck; and a wide and thick bottom flange (38.4 in) to accommodate a large number of prestressing strands. The depth of NU girders varies from 20.3 in. to 63.6 in. to allow the construction of bridges. that spans up to 210 ft with a high economic competency. These unique characteristics significantly affect the flexure and shear resistance of NU girders, and consequently, influence their reliability when the uncertainty of loads, material properties, and fabrication parameters are considered. This paper presents the reliability analysis of NU girders designed using the strength I limit state of the AASHTO LRFD bridge design specifications. Resistance models are developed for several types of NU girders (NU1600, NU1800, and NU2000) and considering different combinations of girder span (120 to 200 ft) and girder spacing (8 to 12 ft). The variability of flexure and shear resistance is calculated based on the uncertainty of: i) material properties, such as cast-in-place concrete strength, precast concrete initial and final strength, reinforcing steel yield strength, and prestressing strands ultimate strength; and ii) fabrication parameters, such as the dimensions of concrete sections, area of reinforcing steel, and area of prestressing strands. Load models are developed to account for the uncertainty in dead load, wearing surface load, live load, and impact load. The calculated reliability indices are examined for consistency and compared against the target reliability index for various combinations of girder type, span, and spacing.

UR - http://www.scopus.com/inward/record.url?scp=84890918938&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84890918938&partnerID=8YFLogxK

U2 - 10.1061/40946(248)81

DO - 10.1061/40946(248)81

M3 - Conference contribution

SN - 0784409463

SN - 9780784409466

T3 - New Horizons and Better Practices

BT - New Horizons and Better Practices

ER -