Real-time monitoring and control during MBE growth of GaAs/AlGaAs Bragg reflectors using multiwave ellipsometry

Thomas Wagner, Blaine D. Johs, Craig M. Herzinger, Ping He, Shakil Pittal, John A. Woollam

Research output: Contribution to journalConference article

Abstract

New multi-wavelength in-situ ellipsometer acquiring accurate ellipsometric data at 44 wavelength form 415 to 750 nm in less than 1s is directly mounted on a MBE growth system. Compared to single wavelength ellipsometers enough measured data are available to have access to layer thickness, composition, temperature and exact angle of incidence. In- situ monitoring and real time analysis was used to control the process of GaAs/AlGaAs Bragg reflectors with center wavelength of 1000 nm. The layer thickness is controlled very accurately even though ellipsometric data was acquired only every 3 seconds. The accuracy of shutter timing can be made very precisely even for slow ellipsometric acquisition rates and substrate wobble due to MBE substrate rotation. The control algorithm for two reflectors did not attempt to control the Al composition of an individual AlGaAs layer, but the measured composition was used to adjust the Al cell temperature for the next AlGaAs layer. In comparison for another reflector, the FastDyn fitting routine were used to simultaneously control the thickness and surface composition of the AlGaAs layers. An overview about the hardware and software integration on the MBE system will be given. The in-situ measurements during the growth control were later compared with ex-situ measurements made with spectroscopic ellipsometer system VASE.

Original languageEnglish (US)
Pages (from-to)301-307
Number of pages7
JournalProceedings of SPIE - The International Society for Optical Engineering
Volume3094
DOIs
StatePublished - Dec 1 1997
EventPolarimetry and Ellipsometry - Kazimierz Dolny, Poland
Duration: May 20 1996May 20 1996

Fingerprint

Bragg reflectors
Ellipsometry
Reflector
Gallium Arsenide
Molecular beam epitaxy
ellipsometry
aluminum gallium arsenides
ellipsometers
Monitoring
Real-time
Wavelength
wavelengths
Chemical analysis
reflectors
Substrate
Substrates
In Situ Measurements
Surface structure
shutters
in situ measurement

Keywords

  • In-situ ellipsometry
  • MBE growth control
  • Real-time feed back control
  • Spectroscopic ellipsometry

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Computer Science Applications
  • Applied Mathematics
  • Electrical and Electronic Engineering

Cite this

Real-time monitoring and control during MBE growth of GaAs/AlGaAs Bragg reflectors using multiwave ellipsometry. / Wagner, Thomas; Johs, Blaine D.; Herzinger, Craig M.; He, Ping; Pittal, Shakil; Woollam, John A.

In: Proceedings of SPIE - The International Society for Optical Engineering, Vol. 3094, 01.12.1997, p. 301-307.

Research output: Contribution to journalConference article

@article{21f7ad6c05be473d842262f31f617aa7,
title = "Real-time monitoring and control during MBE growth of GaAs/AlGaAs Bragg reflectors using multiwave ellipsometry",
abstract = "New multi-wavelength in-situ ellipsometer acquiring accurate ellipsometric data at 44 wavelength form 415 to 750 nm in less than 1s is directly mounted on a MBE growth system. Compared to single wavelength ellipsometers enough measured data are available to have access to layer thickness, composition, temperature and exact angle of incidence. In- situ monitoring and real time analysis was used to control the process of GaAs/AlGaAs Bragg reflectors with center wavelength of 1000 nm. The layer thickness is controlled very accurately even though ellipsometric data was acquired only every 3 seconds. The accuracy of shutter timing can be made very precisely even for slow ellipsometric acquisition rates and substrate wobble due to MBE substrate rotation. The control algorithm for two reflectors did not attempt to control the Al composition of an individual AlGaAs layer, but the measured composition was used to adjust the Al cell temperature for the next AlGaAs layer. In comparison for another reflector, the FastDyn fitting routine were used to simultaneously control the thickness and surface composition of the AlGaAs layers. An overview about the hardware and software integration on the MBE system will be given. The in-situ measurements during the growth control were later compared with ex-situ measurements made with spectroscopic ellipsometer system VASE.",
keywords = "In-situ ellipsometry, MBE growth control, Real-time feed back control, Spectroscopic ellipsometry",
author = "Thomas Wagner and Johs, {Blaine D.} and Herzinger, {Craig M.} and Ping He and Shakil Pittal and Woollam, {John A.}",
year = "1997",
month = "12",
day = "1",
doi = "10.1117/12.271830",
language = "English (US)",
volume = "3094",
pages = "301--307",
journal = "Proceedings of SPIE - The International Society for Optical Engineering",
issn = "0277-786X",
publisher = "SPIE",

}

TY - JOUR

T1 - Real-time monitoring and control during MBE growth of GaAs/AlGaAs Bragg reflectors using multiwave ellipsometry

AU - Wagner, Thomas

AU - Johs, Blaine D.

AU - Herzinger, Craig M.

AU - He, Ping

AU - Pittal, Shakil

AU - Woollam, John A.

PY - 1997/12/1

Y1 - 1997/12/1

N2 - New multi-wavelength in-situ ellipsometer acquiring accurate ellipsometric data at 44 wavelength form 415 to 750 nm in less than 1s is directly mounted on a MBE growth system. Compared to single wavelength ellipsometers enough measured data are available to have access to layer thickness, composition, temperature and exact angle of incidence. In- situ monitoring and real time analysis was used to control the process of GaAs/AlGaAs Bragg reflectors with center wavelength of 1000 nm. The layer thickness is controlled very accurately even though ellipsometric data was acquired only every 3 seconds. The accuracy of shutter timing can be made very precisely even for slow ellipsometric acquisition rates and substrate wobble due to MBE substrate rotation. The control algorithm for two reflectors did not attempt to control the Al composition of an individual AlGaAs layer, but the measured composition was used to adjust the Al cell temperature for the next AlGaAs layer. In comparison for another reflector, the FastDyn fitting routine were used to simultaneously control the thickness and surface composition of the AlGaAs layers. An overview about the hardware and software integration on the MBE system will be given. The in-situ measurements during the growth control were later compared with ex-situ measurements made with spectroscopic ellipsometer system VASE.

AB - New multi-wavelength in-situ ellipsometer acquiring accurate ellipsometric data at 44 wavelength form 415 to 750 nm in less than 1s is directly mounted on a MBE growth system. Compared to single wavelength ellipsometers enough measured data are available to have access to layer thickness, composition, temperature and exact angle of incidence. In- situ monitoring and real time analysis was used to control the process of GaAs/AlGaAs Bragg reflectors with center wavelength of 1000 nm. The layer thickness is controlled very accurately even though ellipsometric data was acquired only every 3 seconds. The accuracy of shutter timing can be made very precisely even for slow ellipsometric acquisition rates and substrate wobble due to MBE substrate rotation. The control algorithm for two reflectors did not attempt to control the Al composition of an individual AlGaAs layer, but the measured composition was used to adjust the Al cell temperature for the next AlGaAs layer. In comparison for another reflector, the FastDyn fitting routine were used to simultaneously control the thickness and surface composition of the AlGaAs layers. An overview about the hardware and software integration on the MBE system will be given. The in-situ measurements during the growth control were later compared with ex-situ measurements made with spectroscopic ellipsometer system VASE.

KW - In-situ ellipsometry

KW - MBE growth control

KW - Real-time feed back control

KW - Spectroscopic ellipsometry

UR - http://www.scopus.com/inward/record.url?scp=58649117548&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=58649117548&partnerID=8YFLogxK

U2 - 10.1117/12.271830

DO - 10.1117/12.271830

M3 - Conference article

AN - SCOPUS:58649117548

VL - 3094

SP - 301

EP - 307

JO - Proceedings of SPIE - The International Society for Optical Engineering

JF - Proceedings of SPIE - The International Society for Optical Engineering

SN - 0277-786X

ER -