Nonlinear mechanical behavior of the human common, external, and internal carotid arteries in vivo

Alexey Kamenskiy, Yuris Dzenis, Jason N Mactaggart, Thomas G. Lynch, Syed A. Jaffar Kazmi, Iraklis I Pipinos

Research output: Contribution to journalArticle

18 Citations (Scopus)

Abstract

Background: The mechanical environment and properties of the carotid artery play an important role in the formation and progression of atherosclerosis in the carotid bifurcation. The purpose of this work was to measure and compare the range and variation of circumferential stress and tangent elastic moduli in the human common (CCA), external (ECA), and internal (ICA) carotid arteries over the cardiac cycle in vivo. Methods: Measurements were performed in the surgically exposed proximal cervical CCA, distal ECA, and distal ICA of normotensive patients (n = 16) undergoing carotid endarterectomy. All measurements were completed in vivo over the cardiac cycle in the repaired carotid bifurcation after the atherosclerotic plaque was successfully removed. B-mode Duplex ultrasonography was used for measurement of arterial diameter and wall thickness, and an angiocatheter placed in the CCA was used for concurrent measurement of blood pressure. A semiautomatic segmentation algorithm was used to track changes in arterial diameter and wall thickness in response to blood pressure. These measurements were then used to calculate the variation of circumferential (hoop) stresses, tangent elastic moduli (the slope of the stress-strain curve at specified stresses), and strain-induced stiffness of the arterial wall (stiffening in response to the increase of intraluminal blood pressure) for each patient. Results: The diameter and wall thickness of the segments (CCA, ECA, and ICA) of the carotid bifurcation were found to decrease and strain-induced stiffness to increase from proximal CCA to distal ECA and ICA. The circumferential stress from end-diastole (minimum pressure) to peak-systole (maximum pressure) varied nonlinearly from 25 ± 7 to 63 ± 23 kPa (CCA), from 22 ± 7 to 57 ± 19 kPa (ECA), and from 28 ± 8 to 67 ± 23 kPa (ICA). Tangent elastic moduli also varied nonlinearly from end-diastole to peak-systole as follows: from 0.40 ± 0.25 to 1.50 ± 2.05 MPa (CCA), from 0.49 ± 0.34 to 1.14 ± 0.52 MPa (ECA), and from 0.68 ± 0.31 to 1.51 ± 0.69 MPa (ICA). The strain-induced stiffness of CCA and ECA increased more than 3-fold and the stiffness of ICA increased more than 2.5-fold at peak-systole compared with end-diastole. Conclusions: The in vivo mechanical behavior of the three segments of the carotid bifurcation was qualitatively similar, but quantitatively different. All three arteries - CCA, ECA and ICA - exhibited nonlinear variations of circumferential stress and tangent elastic moduli within the normal pressure range. The variability in the properties of the three segments of the carotid bifurcation indicates a need for development of carotid models that match the in vivo properties of the carotid segments. Finally, the observed nonlinear behavior of the artery points to the need for future vascular mechanical studies to evaluate the mechanical factors of the arterial wall over the entire cardiac cycle.

Original languageEnglish (US)
Pages (from-to)329-336
Number of pages8
JournalJournal of Surgical Research
Volume176
Issue number1
DOIs
StatePublished - Jul 1 2012

Fingerprint

External Carotid Artery
Elastic Modulus
Common Carotid Artery
Internal Carotid Artery
Diastole
Systole
Blood Pressure
Pressure
Arteries
Vascular Stiffness
Carotid Artery Diseases
Carotid Endarterectomy
Atherosclerotic Plaques
Carotid Arteries
Blood Vessels
Ultrasonography
Reference Values

Keywords

  • circumferential stress
  • common carotid artery
  • external carotid artery
  • in vivo mechanical properties
  • internal carotid artery
  • stiffening

ASJC Scopus subject areas

  • Surgery

Cite this

Nonlinear mechanical behavior of the human common, external, and internal carotid arteries in vivo. / Kamenskiy, Alexey; Dzenis, Yuris; Mactaggart, Jason N; Lynch, Thomas G.; Jaffar Kazmi, Syed A.; Pipinos, Iraklis I.

In: Journal of Surgical Research, Vol. 176, No. 1, 01.07.2012, p. 329-336.

Research output: Contribution to journalArticle

@article{f882da189e5e4b60964cffdbed7dfa9e,
title = "Nonlinear mechanical behavior of the human common, external, and internal carotid arteries in vivo",
abstract = "Background: The mechanical environment and properties of the carotid artery play an important role in the formation and progression of atherosclerosis in the carotid bifurcation. The purpose of this work was to measure and compare the range and variation of circumferential stress and tangent elastic moduli in the human common (CCA), external (ECA), and internal (ICA) carotid arteries over the cardiac cycle in vivo. Methods: Measurements were performed in the surgically exposed proximal cervical CCA, distal ECA, and distal ICA of normotensive patients (n = 16) undergoing carotid endarterectomy. All measurements were completed in vivo over the cardiac cycle in the repaired carotid bifurcation after the atherosclerotic plaque was successfully removed. B-mode Duplex ultrasonography was used for measurement of arterial diameter and wall thickness, and an angiocatheter placed in the CCA was used for concurrent measurement of blood pressure. A semiautomatic segmentation algorithm was used to track changes in arterial diameter and wall thickness in response to blood pressure. These measurements were then used to calculate the variation of circumferential (hoop) stresses, tangent elastic moduli (the slope of the stress-strain curve at specified stresses), and strain-induced stiffness of the arterial wall (stiffening in response to the increase of intraluminal blood pressure) for each patient. Results: The diameter and wall thickness of the segments (CCA, ECA, and ICA) of the carotid bifurcation were found to decrease and strain-induced stiffness to increase from proximal CCA to distal ECA and ICA. The circumferential stress from end-diastole (minimum pressure) to peak-systole (maximum pressure) varied nonlinearly from 25 ± 7 to 63 ± 23 kPa (CCA), from 22 ± 7 to 57 ± 19 kPa (ECA), and from 28 ± 8 to 67 ± 23 kPa (ICA). Tangent elastic moduli also varied nonlinearly from end-diastole to peak-systole as follows: from 0.40 ± 0.25 to 1.50 ± 2.05 MPa (CCA), from 0.49 ± 0.34 to 1.14 ± 0.52 MPa (ECA), and from 0.68 ± 0.31 to 1.51 ± 0.69 MPa (ICA). The strain-induced stiffness of CCA and ECA increased more than 3-fold and the stiffness of ICA increased more than 2.5-fold at peak-systole compared with end-diastole. Conclusions: The in vivo mechanical behavior of the three segments of the carotid bifurcation was qualitatively similar, but quantitatively different. All three arteries - CCA, ECA and ICA - exhibited nonlinear variations of circumferential stress and tangent elastic moduli within the normal pressure range. The variability in the properties of the three segments of the carotid bifurcation indicates a need for development of carotid models that match the in vivo properties of the carotid segments. Finally, the observed nonlinear behavior of the artery points to the need for future vascular mechanical studies to evaluate the mechanical factors of the arterial wall over the entire cardiac cycle.",
keywords = "circumferential stress, common carotid artery, external carotid artery, in vivo mechanical properties, internal carotid artery, stiffening",
author = "Alexey Kamenskiy and Yuris Dzenis and Mactaggart, {Jason N} and Lynch, {Thomas G.} and {Jaffar Kazmi}, {Syed A.} and Pipinos, {Iraklis I}",
year = "2012",
month = "7",
day = "1",
doi = "10.1016/j.jss.2011.09.058",
language = "English (US)",
volume = "176",
pages = "329--336",
journal = "Journal of Surgical Research",
issn = "0022-4804",
publisher = "Academic Press Inc.",
number = "1",

}

TY - JOUR

T1 - Nonlinear mechanical behavior of the human common, external, and internal carotid arteries in vivo

AU - Kamenskiy, Alexey

AU - Dzenis, Yuris

AU - Mactaggart, Jason N

AU - Lynch, Thomas G.

AU - Jaffar Kazmi, Syed A.

AU - Pipinos, Iraklis I

PY - 2012/7/1

Y1 - 2012/7/1

N2 - Background: The mechanical environment and properties of the carotid artery play an important role in the formation and progression of atherosclerosis in the carotid bifurcation. The purpose of this work was to measure and compare the range and variation of circumferential stress and tangent elastic moduli in the human common (CCA), external (ECA), and internal (ICA) carotid arteries over the cardiac cycle in vivo. Methods: Measurements were performed in the surgically exposed proximal cervical CCA, distal ECA, and distal ICA of normotensive patients (n = 16) undergoing carotid endarterectomy. All measurements were completed in vivo over the cardiac cycle in the repaired carotid bifurcation after the atherosclerotic plaque was successfully removed. B-mode Duplex ultrasonography was used for measurement of arterial diameter and wall thickness, and an angiocatheter placed in the CCA was used for concurrent measurement of blood pressure. A semiautomatic segmentation algorithm was used to track changes in arterial diameter and wall thickness in response to blood pressure. These measurements were then used to calculate the variation of circumferential (hoop) stresses, tangent elastic moduli (the slope of the stress-strain curve at specified stresses), and strain-induced stiffness of the arterial wall (stiffening in response to the increase of intraluminal blood pressure) for each patient. Results: The diameter and wall thickness of the segments (CCA, ECA, and ICA) of the carotid bifurcation were found to decrease and strain-induced stiffness to increase from proximal CCA to distal ECA and ICA. The circumferential stress from end-diastole (minimum pressure) to peak-systole (maximum pressure) varied nonlinearly from 25 ± 7 to 63 ± 23 kPa (CCA), from 22 ± 7 to 57 ± 19 kPa (ECA), and from 28 ± 8 to 67 ± 23 kPa (ICA). Tangent elastic moduli also varied nonlinearly from end-diastole to peak-systole as follows: from 0.40 ± 0.25 to 1.50 ± 2.05 MPa (CCA), from 0.49 ± 0.34 to 1.14 ± 0.52 MPa (ECA), and from 0.68 ± 0.31 to 1.51 ± 0.69 MPa (ICA). The strain-induced stiffness of CCA and ECA increased more than 3-fold and the stiffness of ICA increased more than 2.5-fold at peak-systole compared with end-diastole. Conclusions: The in vivo mechanical behavior of the three segments of the carotid bifurcation was qualitatively similar, but quantitatively different. All three arteries - CCA, ECA and ICA - exhibited nonlinear variations of circumferential stress and tangent elastic moduli within the normal pressure range. The variability in the properties of the three segments of the carotid bifurcation indicates a need for development of carotid models that match the in vivo properties of the carotid segments. Finally, the observed nonlinear behavior of the artery points to the need for future vascular mechanical studies to evaluate the mechanical factors of the arterial wall over the entire cardiac cycle.

AB - Background: The mechanical environment and properties of the carotid artery play an important role in the formation and progression of atherosclerosis in the carotid bifurcation. The purpose of this work was to measure and compare the range and variation of circumferential stress and tangent elastic moduli in the human common (CCA), external (ECA), and internal (ICA) carotid arteries over the cardiac cycle in vivo. Methods: Measurements were performed in the surgically exposed proximal cervical CCA, distal ECA, and distal ICA of normotensive patients (n = 16) undergoing carotid endarterectomy. All measurements were completed in vivo over the cardiac cycle in the repaired carotid bifurcation after the atherosclerotic plaque was successfully removed. B-mode Duplex ultrasonography was used for measurement of arterial diameter and wall thickness, and an angiocatheter placed in the CCA was used for concurrent measurement of blood pressure. A semiautomatic segmentation algorithm was used to track changes in arterial diameter and wall thickness in response to blood pressure. These measurements were then used to calculate the variation of circumferential (hoop) stresses, tangent elastic moduli (the slope of the stress-strain curve at specified stresses), and strain-induced stiffness of the arterial wall (stiffening in response to the increase of intraluminal blood pressure) for each patient. Results: The diameter and wall thickness of the segments (CCA, ECA, and ICA) of the carotid bifurcation were found to decrease and strain-induced stiffness to increase from proximal CCA to distal ECA and ICA. The circumferential stress from end-diastole (minimum pressure) to peak-systole (maximum pressure) varied nonlinearly from 25 ± 7 to 63 ± 23 kPa (CCA), from 22 ± 7 to 57 ± 19 kPa (ECA), and from 28 ± 8 to 67 ± 23 kPa (ICA). Tangent elastic moduli also varied nonlinearly from end-diastole to peak-systole as follows: from 0.40 ± 0.25 to 1.50 ± 2.05 MPa (CCA), from 0.49 ± 0.34 to 1.14 ± 0.52 MPa (ECA), and from 0.68 ± 0.31 to 1.51 ± 0.69 MPa (ICA). The strain-induced stiffness of CCA and ECA increased more than 3-fold and the stiffness of ICA increased more than 2.5-fold at peak-systole compared with end-diastole. Conclusions: The in vivo mechanical behavior of the three segments of the carotid bifurcation was qualitatively similar, but quantitatively different. All three arteries - CCA, ECA and ICA - exhibited nonlinear variations of circumferential stress and tangent elastic moduli within the normal pressure range. The variability in the properties of the three segments of the carotid bifurcation indicates a need for development of carotid models that match the in vivo properties of the carotid segments. Finally, the observed nonlinear behavior of the artery points to the need for future vascular mechanical studies to evaluate the mechanical factors of the arterial wall over the entire cardiac cycle.

KW - circumferential stress

KW - common carotid artery

KW - external carotid artery

KW - in vivo mechanical properties

KW - internal carotid artery

KW - stiffening

UR - http://www.scopus.com/inward/record.url?scp=84862013204&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84862013204&partnerID=8YFLogxK

U2 - 10.1016/j.jss.2011.09.058

DO - 10.1016/j.jss.2011.09.058

M3 - Article

C2 - 22099586

AN - SCOPUS:84862013204

VL - 176

SP - 329

EP - 336

JO - Journal of Surgical Research

JF - Journal of Surgical Research

SN - 0022-4804

IS - 1

ER -