Morphology and Thermomechanical Properties in Epoxy Acrylate Interpenetrated Networks

Lena Butterfield, Emilie Bobo, Wenlong Li, Sven Henning, Nicolas Delpouve, Li Tan, Jean Marc Saiter, Mehrdad Negahban

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Interpenetrated Polymer Networks (IPNs) were produced from the simultaneous UV-photocuring of Bisphenol A propoxylate diacrylate (BPA-PDA) and 3,4-epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (ECH) under a polychromatic source. Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM) were used to investigate the morphology of the samples, when dependence in thermal stability with the composition was evidenced from Thermogravimetric Analysis (TGA). The aptitude to create a wide range of thermomechanical properties was investigated towards Differential Scanning Calorimetry (DSC), Dynamic mechanical Analysis (DMA) and tensile tests. Post-curing contributes to increase the glass transition and the strain at break of the materials, and is also responsible to higher resistance to thermal degradation. Results show promising possibilities for the future development of graded materials with property control at different scales.

Original languageEnglish (US)
Pages (from-to)59-66
Number of pages8
JournalMacromolecular Symposia
Volume365
Issue number1
DOIs
StatePublished - Jul 1 2016

Fingerprint

acrylates
aptitude
bisphenols
thermal degradation
high resistance
Dynamic mechanical analysis
tensile tests
curing
Curing
Thermogravimetric analysis
Glass transition
Differential scanning calorimetry
Atomic force microscopy
Polymers
Pyrolysis
Thermodynamic stability
thermal stability
heat measurement
atomic force microscopy
Transmission electron microscopy

Keywords

  • photocuring
  • polymer characterization
  • polymer networks

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Organic Chemistry
  • Polymers and Plastics
  • Materials Chemistry

Cite this

Morphology and Thermomechanical Properties in Epoxy Acrylate Interpenetrated Networks. / Butterfield, Lena; Bobo, Emilie; Li, Wenlong; Henning, Sven; Delpouve, Nicolas; Tan, Li; Saiter, Jean Marc; Negahban, Mehrdad.

In: Macromolecular Symposia, Vol. 365, No. 1, 01.07.2016, p. 59-66.

Research output: Contribution to journalArticle

Butterfield, L, Bobo, E, Li, W, Henning, S, Delpouve, N, Tan, L, Saiter, JM & Negahban, M 2016, 'Morphology and Thermomechanical Properties in Epoxy Acrylate Interpenetrated Networks', Macromolecular Symposia, vol. 365, no. 1, pp. 59-66. https://doi.org/10.1002/masy.201650012
Butterfield, Lena ; Bobo, Emilie ; Li, Wenlong ; Henning, Sven ; Delpouve, Nicolas ; Tan, Li ; Saiter, Jean Marc ; Negahban, Mehrdad. / Morphology and Thermomechanical Properties in Epoxy Acrylate Interpenetrated Networks. In: Macromolecular Symposia. 2016 ; Vol. 365, No. 1. pp. 59-66.
@article{55c60cdb5ca747dc804177ddb8b5a915,
title = "Morphology and Thermomechanical Properties in Epoxy Acrylate Interpenetrated Networks",
abstract = "Interpenetrated Polymer Networks (IPNs) were produced from the simultaneous UV-photocuring of Bisphenol A propoxylate diacrylate (BPA-PDA) and 3,4-epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (ECH) under a polychromatic source. Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM) were used to investigate the morphology of the samples, when dependence in thermal stability with the composition was evidenced from Thermogravimetric Analysis (TGA). The aptitude to create a wide range of thermomechanical properties was investigated towards Differential Scanning Calorimetry (DSC), Dynamic mechanical Analysis (DMA) and tensile tests. Post-curing contributes to increase the glass transition and the strain at break of the materials, and is also responsible to higher resistance to thermal degradation. Results show promising possibilities for the future development of graded materials with property control at different scales.",
keywords = "photocuring, polymer characterization, polymer networks",
author = "Lena Butterfield and Emilie Bobo and Wenlong Li and Sven Henning and Nicolas Delpouve and Li Tan and Saiter, {Jean Marc} and Mehrdad Negahban",
year = "2016",
month = "7",
day = "1",
doi = "10.1002/masy.201650012",
language = "English (US)",
volume = "365",
pages = "59--66",
journal = "Macromolecular Symposia",
issn = "1022-1360",
publisher = "Wiley-VCH Verlag",
number = "1",

}

TY - JOUR

T1 - Morphology and Thermomechanical Properties in Epoxy Acrylate Interpenetrated Networks

AU - Butterfield, Lena

AU - Bobo, Emilie

AU - Li, Wenlong

AU - Henning, Sven

AU - Delpouve, Nicolas

AU - Tan, Li

AU - Saiter, Jean Marc

AU - Negahban, Mehrdad

PY - 2016/7/1

Y1 - 2016/7/1

N2 - Interpenetrated Polymer Networks (IPNs) were produced from the simultaneous UV-photocuring of Bisphenol A propoxylate diacrylate (BPA-PDA) and 3,4-epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (ECH) under a polychromatic source. Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM) were used to investigate the morphology of the samples, when dependence in thermal stability with the composition was evidenced from Thermogravimetric Analysis (TGA). The aptitude to create a wide range of thermomechanical properties was investigated towards Differential Scanning Calorimetry (DSC), Dynamic mechanical Analysis (DMA) and tensile tests. Post-curing contributes to increase the glass transition and the strain at break of the materials, and is also responsible to higher resistance to thermal degradation. Results show promising possibilities for the future development of graded materials with property control at different scales.

AB - Interpenetrated Polymer Networks (IPNs) were produced from the simultaneous UV-photocuring of Bisphenol A propoxylate diacrylate (BPA-PDA) and 3,4-epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (ECH) under a polychromatic source. Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM) were used to investigate the morphology of the samples, when dependence in thermal stability with the composition was evidenced from Thermogravimetric Analysis (TGA). The aptitude to create a wide range of thermomechanical properties was investigated towards Differential Scanning Calorimetry (DSC), Dynamic mechanical Analysis (DMA) and tensile tests. Post-curing contributes to increase the glass transition and the strain at break of the materials, and is also responsible to higher resistance to thermal degradation. Results show promising possibilities for the future development of graded materials with property control at different scales.

KW - photocuring

KW - polymer characterization

KW - polymer networks

UR - http://www.scopus.com/inward/record.url?scp=84979692054&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84979692054&partnerID=8YFLogxK

U2 - 10.1002/masy.201650012

DO - 10.1002/masy.201650012

M3 - Article

AN - SCOPUS:84979692054

VL - 365

SP - 59

EP - 66

JO - Macromolecular Symposia

JF - Macromolecular Symposia

SN - 1022-1360

IS - 1

ER -