Modeling heat and mass transport during microwave heating of frozen food rotating on a turntable

Jiajia Chen, Krishnamoorthy Pitchai, Sohan Birla, David Jones, Mehrdad Negahban, Jeyamkondan Subbiah

Research output: Contribution to journalArticle

18 Citations (Scopus)

Abstract

Microwave heating of frozen foods involves multiple physics and food product development has been trial-and-error in the food industry. Multiphysics models can be used to understand microwave interactions and can assist in design of food that can be heated more uniformly. A comprehensive three-dimensional finite element model for describing microwave heating of a food product on a rotating turntable is developed including multiphysics of Maxwell's electromagnetic heating, energy conservation, Darcy's velocity, mass conservations of water and gas, and phase change of melting and evaporation of water. The necessity of incorporating mass transfer physics was investigated and confirmed. Twelve discrete rotational steps were used in one rotational cycle. Two approaches of updating dielectric properties at each rotational step (typical) and each cycle (simplified) were evaluated. The models using typical and simplified approaches were developed and validated for heating of a 550 g tray of frozen mashed potato for 6 min in a 1250 W microwave oven on a rotating turntable. The spatial variation of the top surface temperatures of the mashed potato acquired by an infrared camera, the transient temperatures at six locations recorded by fiber optic sensors, and the total moisture loss during heating all showed good agreement with the simulation results for both approaches. The typical and simplified approaches had similar RMSE values of transient temperatures of, respectively, 13.1 and 13.2 °C, while the RMSE values between experimental replications was 8.0 °C. The RMSE values of total moisture loss of were similar (2.2 and 2.4 g) for both approaches. With 83% reduction in computation time for the simplified approach, this method can be used to evaluate the microwave heating of food products and accelerate microwaveable food products development.

Original languageEnglish (US)
Pages (from-to)116-127
Number of pages12
JournalFood and Bioproducts Processing
Volume99
DOIs
StatePublished - Jul 1 2016

Fingerprint

Frozen Foods
Phonographs
frozen foods
Microwave heating
microwave treatment
Microwaves
mass transfer
Heating
foods
Mass transfer
Hot Temperature
heat
product development
Food
physics
Physics
potatoes
Solanum tuberosum
dielectric properties
fiber optics

Keywords

  • Finite element analysis
  • Heat transfer
  • Mass transfer
  • Microwave heating
  • Rotation
  • Updating dielectric properties

ASJC Scopus subject areas

  • Food Science
  • Biochemistry
  • Biotechnology
  • Chemical Engineering(all)

Cite this

Modeling heat and mass transport during microwave heating of frozen food rotating on a turntable. / Chen, Jiajia; Pitchai, Krishnamoorthy; Birla, Sohan; Jones, David; Negahban, Mehrdad; Subbiah, Jeyamkondan.

In: Food and Bioproducts Processing, Vol. 99, 01.07.2016, p. 116-127.

Research output: Contribution to journalArticle

Chen, Jiajia ; Pitchai, Krishnamoorthy ; Birla, Sohan ; Jones, David ; Negahban, Mehrdad ; Subbiah, Jeyamkondan. / Modeling heat and mass transport during microwave heating of frozen food rotating on a turntable. In: Food and Bioproducts Processing. 2016 ; Vol. 99. pp. 116-127.
@article{185c1f6977c742d5b5211f0b7eb3ba7a,
title = "Modeling heat and mass transport during microwave heating of frozen food rotating on a turntable",
abstract = "Microwave heating of frozen foods involves multiple physics and food product development has been trial-and-error in the food industry. Multiphysics models can be used to understand microwave interactions and can assist in design of food that can be heated more uniformly. A comprehensive three-dimensional finite element model for describing microwave heating of a food product on a rotating turntable is developed including multiphysics of Maxwell's electromagnetic heating, energy conservation, Darcy's velocity, mass conservations of water and gas, and phase change of melting and evaporation of water. The necessity of incorporating mass transfer physics was investigated and confirmed. Twelve discrete rotational steps were used in one rotational cycle. Two approaches of updating dielectric properties at each rotational step (typical) and each cycle (simplified) were evaluated. The models using typical and simplified approaches were developed and validated for heating of a 550 g tray of frozen mashed potato for 6 min in a 1250 W microwave oven on a rotating turntable. The spatial variation of the top surface temperatures of the mashed potato acquired by an infrared camera, the transient temperatures at six locations recorded by fiber optic sensors, and the total moisture loss during heating all showed good agreement with the simulation results for both approaches. The typical and simplified approaches had similar RMSE values of transient temperatures of, respectively, 13.1 and 13.2 °C, while the RMSE values between experimental replications was 8.0 °C. The RMSE values of total moisture loss of were similar (2.2 and 2.4 g) for both approaches. With 83{\%} reduction in computation time for the simplified approach, this method can be used to evaluate the microwave heating of food products and accelerate microwaveable food products development.",
keywords = "Finite element analysis, Heat transfer, Mass transfer, Microwave heating, Rotation, Updating dielectric properties",
author = "Jiajia Chen and Krishnamoorthy Pitchai and Sohan Birla and David Jones and Mehrdad Negahban and Jeyamkondan Subbiah",
year = "2016",
month = "7",
day = "1",
doi = "10.1016/j.fbp.2016.04.009",
language = "English (US)",
volume = "99",
pages = "116--127",
journal = "Food and Bioproducts Processing",
issn = "0960-3085",
publisher = "Institution of Chemical Engineers",

}

TY - JOUR

T1 - Modeling heat and mass transport during microwave heating of frozen food rotating on a turntable

AU - Chen, Jiajia

AU - Pitchai, Krishnamoorthy

AU - Birla, Sohan

AU - Jones, David

AU - Negahban, Mehrdad

AU - Subbiah, Jeyamkondan

PY - 2016/7/1

Y1 - 2016/7/1

N2 - Microwave heating of frozen foods involves multiple physics and food product development has been trial-and-error in the food industry. Multiphysics models can be used to understand microwave interactions and can assist in design of food that can be heated more uniformly. A comprehensive three-dimensional finite element model for describing microwave heating of a food product on a rotating turntable is developed including multiphysics of Maxwell's electromagnetic heating, energy conservation, Darcy's velocity, mass conservations of water and gas, and phase change of melting and evaporation of water. The necessity of incorporating mass transfer physics was investigated and confirmed. Twelve discrete rotational steps were used in one rotational cycle. Two approaches of updating dielectric properties at each rotational step (typical) and each cycle (simplified) were evaluated. The models using typical and simplified approaches were developed and validated for heating of a 550 g tray of frozen mashed potato for 6 min in a 1250 W microwave oven on a rotating turntable. The spatial variation of the top surface temperatures of the mashed potato acquired by an infrared camera, the transient temperatures at six locations recorded by fiber optic sensors, and the total moisture loss during heating all showed good agreement with the simulation results for both approaches. The typical and simplified approaches had similar RMSE values of transient temperatures of, respectively, 13.1 and 13.2 °C, while the RMSE values between experimental replications was 8.0 °C. The RMSE values of total moisture loss of were similar (2.2 and 2.4 g) for both approaches. With 83% reduction in computation time for the simplified approach, this method can be used to evaluate the microwave heating of food products and accelerate microwaveable food products development.

AB - Microwave heating of frozen foods involves multiple physics and food product development has been trial-and-error in the food industry. Multiphysics models can be used to understand microwave interactions and can assist in design of food that can be heated more uniformly. A comprehensive three-dimensional finite element model for describing microwave heating of a food product on a rotating turntable is developed including multiphysics of Maxwell's electromagnetic heating, energy conservation, Darcy's velocity, mass conservations of water and gas, and phase change of melting and evaporation of water. The necessity of incorporating mass transfer physics was investigated and confirmed. Twelve discrete rotational steps were used in one rotational cycle. Two approaches of updating dielectric properties at each rotational step (typical) and each cycle (simplified) were evaluated. The models using typical and simplified approaches were developed and validated for heating of a 550 g tray of frozen mashed potato for 6 min in a 1250 W microwave oven on a rotating turntable. The spatial variation of the top surface temperatures of the mashed potato acquired by an infrared camera, the transient temperatures at six locations recorded by fiber optic sensors, and the total moisture loss during heating all showed good agreement with the simulation results for both approaches. The typical and simplified approaches had similar RMSE values of transient temperatures of, respectively, 13.1 and 13.2 °C, while the RMSE values between experimental replications was 8.0 °C. The RMSE values of total moisture loss of were similar (2.2 and 2.4 g) for both approaches. With 83% reduction in computation time for the simplified approach, this method can be used to evaluate the microwave heating of food products and accelerate microwaveable food products development.

KW - Finite element analysis

KW - Heat transfer

KW - Mass transfer

KW - Microwave heating

KW - Rotation

KW - Updating dielectric properties

UR - http://www.scopus.com/inward/record.url?scp=84967321309&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84967321309&partnerID=8YFLogxK

U2 - 10.1016/j.fbp.2016.04.009

DO - 10.1016/j.fbp.2016.04.009

M3 - Article

VL - 99

SP - 116

EP - 127

JO - Food and Bioproducts Processing

JF - Food and Bioproducts Processing

SN - 0960-3085

ER -