Micro rotary ultrasonic machining: Effect of machining parameters on material removal rate

Aarati Sarwade, Murali Meenakshi Sundaram, K. P. Rajurkar

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Abstract

This paper presents an investigation of the effect of process parameters on micro rotary ultrasonic machining (micro RUM) performance. Influence of main machining parameters such as spindle speed, abrasive grit size, vibration amplitude on the material removal rate (MRR) was studied. Experiments were conducted to study the effect of different coolants, static load and tool tip geometry. Experiments were also conducted using a constant feedrate mode to monitor the cutting forces developed during machining at different spindle speeds. Preliminary experiments indicated that MRR increases in the presence of ultrasonic vibrations, coolant and tool rotation.

Original languageEnglish (US)
Title of host publicationTransactions of the North American Manufacturing Research Institution of SME 2010, NAMRI/SME
Pages113-120
Number of pages8
StatePublished - Nov 16 2010
Event38th Annual North American Manufacturing Research Conference, NAMRC 38 - Kingston, ON, Canada
Duration: May 25 2010May 28 2010

Publication series

NameTransactions of the North American Manufacturing Research Institution of SME
Volume38
ISSN (Print)1047-3025

Conference

Conference38th Annual North American Manufacturing Research Conference, NAMRC 38
CountryCanada
CityKingston, ON
Period5/25/105/28/10

Fingerprint

Machining
Ultrasonics
Coolants
Experiments
Abrasives
Vibrations (mechanical)
Geometry

Keywords

  • Brittle materials
  • Micro manufacturing
  • Micro rotary ultrasonic machining

ASJC Scopus subject areas

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Cite this

Sarwade, A., Sundaram, M. M., & Rajurkar, K. P. (2010). Micro rotary ultrasonic machining: Effect of machining parameters on material removal rate. In Transactions of the North American Manufacturing Research Institution of SME 2010, NAMRI/SME (pp. 113-120). (Transactions of the North American Manufacturing Research Institution of SME; Vol. 38).

Micro rotary ultrasonic machining : Effect of machining parameters on material removal rate. / Sarwade, Aarati; Sundaram, Murali Meenakshi; Rajurkar, K. P.

Transactions of the North American Manufacturing Research Institution of SME 2010, NAMRI/SME. 2010. p. 113-120 (Transactions of the North American Manufacturing Research Institution of SME; Vol. 38).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sarwade, A, Sundaram, MM & Rajurkar, KP 2010, Micro rotary ultrasonic machining: Effect of machining parameters on material removal rate. in Transactions of the North American Manufacturing Research Institution of SME 2010, NAMRI/SME. Transactions of the North American Manufacturing Research Institution of SME, vol. 38, pp. 113-120, 38th Annual North American Manufacturing Research Conference, NAMRC 38, Kingston, ON, Canada, 5/25/10.
Sarwade A, Sundaram MM, Rajurkar KP. Micro rotary ultrasonic machining: Effect of machining parameters on material removal rate. In Transactions of the North American Manufacturing Research Institution of SME 2010, NAMRI/SME. 2010. p. 113-120. (Transactions of the North American Manufacturing Research Institution of SME).
Sarwade, Aarati ; Sundaram, Murali Meenakshi ; Rajurkar, K. P. / Micro rotary ultrasonic machining : Effect of machining parameters on material removal rate. Transactions of the North American Manufacturing Research Institution of SME 2010, NAMRI/SME. 2010. pp. 113-120 (Transactions of the North American Manufacturing Research Institution of SME).
@inproceedings{2857d2e5389e4403ada80e6c405abce8,
title = "Micro rotary ultrasonic machining: Effect of machining parameters on material removal rate",
abstract = "This paper presents an investigation of the effect of process parameters on micro rotary ultrasonic machining (micro RUM) performance. Influence of main machining parameters such as spindle speed, abrasive grit size, vibration amplitude on the material removal rate (MRR) was studied. Experiments were conducted to study the effect of different coolants, static load and tool tip geometry. Experiments were also conducted using a constant feedrate mode to monitor the cutting forces developed during machining at different spindle speeds. Preliminary experiments indicated that MRR increases in the presence of ultrasonic vibrations, coolant and tool rotation.",
keywords = "Brittle materials, Micro manufacturing, Micro rotary ultrasonic machining",
author = "Aarati Sarwade and Sundaram, {Murali Meenakshi} and Rajurkar, {K. P.}",
year = "2010",
month = "11",
day = "16",
language = "English (US)",
isbn = "0872638685",
series = "Transactions of the North American Manufacturing Research Institution of SME",
pages = "113--120",
booktitle = "Transactions of the North American Manufacturing Research Institution of SME 2010, NAMRI/SME",

}

TY - GEN

T1 - Micro rotary ultrasonic machining

T2 - Effect of machining parameters on material removal rate

AU - Sarwade, Aarati

AU - Sundaram, Murali Meenakshi

AU - Rajurkar, K. P.

PY - 2010/11/16

Y1 - 2010/11/16

N2 - This paper presents an investigation of the effect of process parameters on micro rotary ultrasonic machining (micro RUM) performance. Influence of main machining parameters such as spindle speed, abrasive grit size, vibration amplitude on the material removal rate (MRR) was studied. Experiments were conducted to study the effect of different coolants, static load and tool tip geometry. Experiments were also conducted using a constant feedrate mode to monitor the cutting forces developed during machining at different spindle speeds. Preliminary experiments indicated that MRR increases in the presence of ultrasonic vibrations, coolant and tool rotation.

AB - This paper presents an investigation of the effect of process parameters on micro rotary ultrasonic machining (micro RUM) performance. Influence of main machining parameters such as spindle speed, abrasive grit size, vibration amplitude on the material removal rate (MRR) was studied. Experiments were conducted to study the effect of different coolants, static load and tool tip geometry. Experiments were also conducted using a constant feedrate mode to monitor the cutting forces developed during machining at different spindle speeds. Preliminary experiments indicated that MRR increases in the presence of ultrasonic vibrations, coolant and tool rotation.

KW - Brittle materials

KW - Micro manufacturing

KW - Micro rotary ultrasonic machining

UR - http://www.scopus.com/inward/record.url?scp=78149383924&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78149383924&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:78149383924

SN - 0872638685

SN - 9780872638686

T3 - Transactions of the North American Manufacturing Research Institution of SME

SP - 113

EP - 120

BT - Transactions of the North American Manufacturing Research Institution of SME 2010, NAMRI/SME

ER -