Mechanical behavior of tensegrity structures with High-mode imperfections

Jianguo Cai, Xinyu Wang, Ruiguo Yang, Jian Feng

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

The potential applications of tensegrity structures are widely accepted in fields, such as civil engineering and soft robotics. However, the curved shapes of struts in tensegrity inspired applications and the corresponding nonlinear mechanical behavior make it necessary to introduce initial imperfections, especially high-mode imperfections. This paper works out a method to analyze the initial imperfection analytically with the basic assumption that the strut length would not change with the deformation. Then a simple three-member tensegrity structure is harnessed here to investigate the mechanical behavior of tensegrity structures with the first three modes of initial imperfections. Our analytical results demonstrated that the stiffness of the tensegrity structure will be reduced significantly with even small initial imperfections. The analytical result of load-displacement curve shows that the deformation shows an upward trend with the rise of initial imperfection mode. Further, a strong nonlinearity arises with increased initial imperfection both in terms of the maximum deformation of the strut as well as the stiffness behavior of the tensegrity. Finite element simulations of tensegrity structures with 6 struts show great consistency with the analytical computation. The initial imperfection method provides an intuitive way to introduce nonlinearity to mechanical behavior. It has major implications in understanding load bearing capacity and force distribution in applications of tensegrity structures.

Original languageEnglish (US)
Pages (from-to)58-63
Number of pages6
JournalMechanics Research Communications
Volume94
DOIs
StatePublished - Dec 2018

Fingerprint

tensegrity structures
struts
Defects
Struts
defects
stiffness
nonlinearity
Stiffness
force distribution
Bearing capacity
Civil engineering
robotics
Loads (forces)
Robotics
engineering

Keywords

  • Different modes
  • Initial imperfection
  • Nonlinearity
  • Stiffness
  • Tensegrity

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Mechanical behavior of tensegrity structures with High-mode imperfections. / Cai, Jianguo; Wang, Xinyu; Yang, Ruiguo; Feng, Jian.

In: Mechanics Research Communications, Vol. 94, 12.2018, p. 58-63.

Research output: Contribution to journalArticle

@article{68e84013bf814e8db11b06b83b3527c4,
title = "Mechanical behavior of tensegrity structures with High-mode imperfections",
abstract = "The potential applications of tensegrity structures are widely accepted in fields, such as civil engineering and soft robotics. However, the curved shapes of struts in tensegrity inspired applications and the corresponding nonlinear mechanical behavior make it necessary to introduce initial imperfections, especially high-mode imperfections. This paper works out a method to analyze the initial imperfection analytically with the basic assumption that the strut length would not change with the deformation. Then a simple three-member tensegrity structure is harnessed here to investigate the mechanical behavior of tensegrity structures with the first three modes of initial imperfections. Our analytical results demonstrated that the stiffness of the tensegrity structure will be reduced significantly with even small initial imperfections. The analytical result of load-displacement curve shows that the deformation shows an upward trend with the rise of initial imperfection mode. Further, a strong nonlinearity arises with increased initial imperfection both in terms of the maximum deformation of the strut as well as the stiffness behavior of the tensegrity. Finite element simulations of tensegrity structures with 6 struts show great consistency with the analytical computation. The initial imperfection method provides an intuitive way to introduce nonlinearity to mechanical behavior. It has major implications in understanding load bearing capacity and force distribution in applications of tensegrity structures.",
keywords = "Different modes, Initial imperfection, Nonlinearity, Stiffness, Tensegrity",
author = "Jianguo Cai and Xinyu Wang and Ruiguo Yang and Jian Feng",
year = "2018",
month = "12",
doi = "10.1016/j.mechrescom.2018.09.006",
language = "English (US)",
volume = "94",
pages = "58--63",
journal = "Mechanics Research Communications",
issn = "0093-6413",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Mechanical behavior of tensegrity structures with High-mode imperfections

AU - Cai, Jianguo

AU - Wang, Xinyu

AU - Yang, Ruiguo

AU - Feng, Jian

PY - 2018/12

Y1 - 2018/12

N2 - The potential applications of tensegrity structures are widely accepted in fields, such as civil engineering and soft robotics. However, the curved shapes of struts in tensegrity inspired applications and the corresponding nonlinear mechanical behavior make it necessary to introduce initial imperfections, especially high-mode imperfections. This paper works out a method to analyze the initial imperfection analytically with the basic assumption that the strut length would not change with the deformation. Then a simple three-member tensegrity structure is harnessed here to investigate the mechanical behavior of tensegrity structures with the first three modes of initial imperfections. Our analytical results demonstrated that the stiffness of the tensegrity structure will be reduced significantly with even small initial imperfections. The analytical result of load-displacement curve shows that the deformation shows an upward trend with the rise of initial imperfection mode. Further, a strong nonlinearity arises with increased initial imperfection both in terms of the maximum deformation of the strut as well as the stiffness behavior of the tensegrity. Finite element simulations of tensegrity structures with 6 struts show great consistency with the analytical computation. The initial imperfection method provides an intuitive way to introduce nonlinearity to mechanical behavior. It has major implications in understanding load bearing capacity and force distribution in applications of tensegrity structures.

AB - The potential applications of tensegrity structures are widely accepted in fields, such as civil engineering and soft robotics. However, the curved shapes of struts in tensegrity inspired applications and the corresponding nonlinear mechanical behavior make it necessary to introduce initial imperfections, especially high-mode imperfections. This paper works out a method to analyze the initial imperfection analytically with the basic assumption that the strut length would not change with the deformation. Then a simple three-member tensegrity structure is harnessed here to investigate the mechanical behavior of tensegrity structures with the first three modes of initial imperfections. Our analytical results demonstrated that the stiffness of the tensegrity structure will be reduced significantly with even small initial imperfections. The analytical result of load-displacement curve shows that the deformation shows an upward trend with the rise of initial imperfection mode. Further, a strong nonlinearity arises with increased initial imperfection both in terms of the maximum deformation of the strut as well as the stiffness behavior of the tensegrity. Finite element simulations of tensegrity structures with 6 struts show great consistency with the analytical computation. The initial imperfection method provides an intuitive way to introduce nonlinearity to mechanical behavior. It has major implications in understanding load bearing capacity and force distribution in applications of tensegrity structures.

KW - Different modes

KW - Initial imperfection

KW - Nonlinearity

KW - Stiffness

KW - Tensegrity

UR - http://www.scopus.com/inward/record.url?scp=85053748782&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85053748782&partnerID=8YFLogxK

U2 - 10.1016/j.mechrescom.2018.09.006

DO - 10.1016/j.mechrescom.2018.09.006

M3 - Article

AN - SCOPUS:85053748782

VL - 94

SP - 58

EP - 63

JO - Mechanics Research Communications

JF - Mechanics Research Communications

SN - 0093-6413

ER -