Magnetism of L10Fe50-x}Co}-x}Pt50 films

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Films of L10 -structure Fe50-xCoxPt 50 films are synthesized by co-sputtering Fe, Co and Pt on (001) MgO substrates and Si substrates with in-situ heating at 830°C. The nanostructures and magnetic properties of the films are characterized by X-ray diffraction, transmission electron microscopy and SQUID. The compositions of the samples Fe50-xCoxPt50 are designed to maintain an atomic (Fe+Co):Pt ratio of 50:50 while increasing the Co content in each successive sample. In all samples, the X-ray diffraction patterns from samples on MgO substrate exhibit three strong peaks, namely L10Fe 50-xCoxPt50 (001), (002) and MgO (002). The X-ray and electron diffraction patterns from untextured samples deposited on Si substrates can be indexed using the L10-structure, being consistent with the result of samples on MgO substrate. Hysteresis-loop measurements show that with increase of the Co concentration from 0 to 15 at%, the saturation magnetization Ms increases from 1017 μ/cm3 to 1165 μ/cm3, the coercivity decreases from 30 kOe to 14 kOe, and anisotropy decreases from 67 Merg/cm3 to 46 Merg/cm3. The nominal maximum energy products are in the range of 39-41 MGOe.

Original languageEnglish (US)
Article number6559098
Pages (from-to)3292-3294
Number of pages3
JournalIEEE Transactions on Magnetics
Volume49
Issue number7
DOIs
StatePublished - Aug 2 2013

Fingerprint

Magnetism
Substrates
X ray diffraction
Diffraction patterns
SQUIDs
Saturation magnetization
Hysteresis loops
Coercive force
Electron diffraction
Sputtering
Nanostructures
Magnetic properties
Anisotropy
Transmission electron microscopy
Heating
Chemical analysis

Keywords

  • Exchange-coupling
  • magnetic anisotropy
  • magnetic film
  • magnetism
  • permanent magnet

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Electrical and Electronic Engineering

Cite this

Magnetism of L10Fe50-x}Co}-x}Pt50 films. / Liu, Yi; Sellmyer, David J.

In: IEEE Transactions on Magnetics, Vol. 49, No. 7, 6559098, 02.08.2013, p. 3292-3294.

Research output: Contribution to journalArticle

@article{2c0e61f08e7145ab9bca4ec9163e87eb,
title = "Magnetism of L10Fe50-x}Co}-x}Pt50 films",
abstract = "Films of L10 -structure Fe50-xCoxPt 50 films are synthesized by co-sputtering Fe, Co and Pt on (001) MgO substrates and Si substrates with in-situ heating at 830°C. The nanostructures and magnetic properties of the films are characterized by X-ray diffraction, transmission electron microscopy and SQUID. The compositions of the samples Fe50-xCoxPt50 are designed to maintain an atomic (Fe+Co):Pt ratio of 50:50 while increasing the Co content in each successive sample. In all samples, the X-ray diffraction patterns from samples on MgO substrate exhibit three strong peaks, namely L10Fe 50-xCoxPt50 (001), (002) and MgO (002). The X-ray and electron diffraction patterns from untextured samples deposited on Si substrates can be indexed using the L10-structure, being consistent with the result of samples on MgO substrate. Hysteresis-loop measurements show that with increase of the Co concentration from 0 to 15 at{\%}, the saturation magnetization Ms increases from 1017 μ/cm3 to 1165 μ/cm3, the coercivity decreases from 30 kOe to 14 kOe, and anisotropy decreases from 67 Merg/cm3 to 46 Merg/cm3. The nominal maximum energy products are in the range of 39-41 MGOe.",
keywords = "Exchange-coupling, magnetic anisotropy, magnetic film, magnetism, permanent magnet",
author = "Yi Liu and Sellmyer, {David J.}",
year = "2013",
month = "8",
day = "2",
doi = "10.1109/TMAG.2013.2240269",
language = "English (US)",
volume = "49",
pages = "3292--3294",
journal = "IEEE Transactions on Magnetics",
issn = "0018-9464",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "7",

}

TY - JOUR

T1 - Magnetism of L10Fe50-x}Co}-x}Pt50 films

AU - Liu, Yi

AU - Sellmyer, David J.

PY - 2013/8/2

Y1 - 2013/8/2

N2 - Films of L10 -structure Fe50-xCoxPt 50 films are synthesized by co-sputtering Fe, Co and Pt on (001) MgO substrates and Si substrates with in-situ heating at 830°C. The nanostructures and magnetic properties of the films are characterized by X-ray diffraction, transmission electron microscopy and SQUID. The compositions of the samples Fe50-xCoxPt50 are designed to maintain an atomic (Fe+Co):Pt ratio of 50:50 while increasing the Co content in each successive sample. In all samples, the X-ray diffraction patterns from samples on MgO substrate exhibit three strong peaks, namely L10Fe 50-xCoxPt50 (001), (002) and MgO (002). The X-ray and electron diffraction patterns from untextured samples deposited on Si substrates can be indexed using the L10-structure, being consistent with the result of samples on MgO substrate. Hysteresis-loop measurements show that with increase of the Co concentration from 0 to 15 at%, the saturation magnetization Ms increases from 1017 μ/cm3 to 1165 μ/cm3, the coercivity decreases from 30 kOe to 14 kOe, and anisotropy decreases from 67 Merg/cm3 to 46 Merg/cm3. The nominal maximum energy products are in the range of 39-41 MGOe.

AB - Films of L10 -structure Fe50-xCoxPt 50 films are synthesized by co-sputtering Fe, Co and Pt on (001) MgO substrates and Si substrates with in-situ heating at 830°C. The nanostructures and magnetic properties of the films are characterized by X-ray diffraction, transmission electron microscopy and SQUID. The compositions of the samples Fe50-xCoxPt50 are designed to maintain an atomic (Fe+Co):Pt ratio of 50:50 while increasing the Co content in each successive sample. In all samples, the X-ray diffraction patterns from samples on MgO substrate exhibit three strong peaks, namely L10Fe 50-xCoxPt50 (001), (002) and MgO (002). The X-ray and electron diffraction patterns from untextured samples deposited on Si substrates can be indexed using the L10-structure, being consistent with the result of samples on MgO substrate. Hysteresis-loop measurements show that with increase of the Co concentration from 0 to 15 at%, the saturation magnetization Ms increases from 1017 μ/cm3 to 1165 μ/cm3, the coercivity decreases from 30 kOe to 14 kOe, and anisotropy decreases from 67 Merg/cm3 to 46 Merg/cm3. The nominal maximum energy products are in the range of 39-41 MGOe.

KW - Exchange-coupling

KW - magnetic anisotropy

KW - magnetic film

KW - magnetism

KW - permanent magnet

UR - http://www.scopus.com/inward/record.url?scp=84880828944&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84880828944&partnerID=8YFLogxK

U2 - 10.1109/TMAG.2013.2240269

DO - 10.1109/TMAG.2013.2240269

M3 - Article

AN - SCOPUS:84880828944

VL - 49

SP - 3292

EP - 3294

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

SN - 0018-9464

IS - 7

M1 - 6559098

ER -