Laser-induced temperature rise in anisotropic substrates

Research output: Contribution to journalArticle

13 Citations (Scopus)

Abstract

Laser-induced temperature rise in anisotropic substrates has been investigated by solving the heat equation in anisotropic media. A model was derived to calculate the laser-induced temperature in anisotropic substrates. It is found that the heat equation in anisotropic media can be simplified to a heat equation in isotropic media by coordinate transformation. The anisotropy of the media can then be reflected by heat source transformation. The results reveal that the laser-induced temperature rise can be significantly affected by the anisotropy of the substrate. The thermal conductivity change along the Z direction (downward into the substrate) will affect the temperature rise more significantly than that along the X and Y directions (parallel to the substrate surface). The anisotropy in thermal conductivity not only affects the peak temperature rise, but also affects the shape of the temperature profile.

Original languageEnglish (US)
Pages (from-to)4893-4900
Number of pages8
JournalJournal of Applied Physics
Volume72
Issue number10
DOIs
StatePublished - Dec 1 1992

Fingerprint

anisotropic media
lasers
thermodynamics
anisotropy
thermal conductivity
temperature
isotropic media
coordinate transformations
heat sources
temperature profiles

ASJC Scopus subject areas

  • Physics and Astronomy(all)

Cite this

Laser-induced temperature rise in anisotropic substrates. / Lu, Yong Feng.

In: Journal of Applied Physics, Vol. 72, No. 10, 01.12.1992, p. 4893-4900.

Research output: Contribution to journalArticle

@article{8af7ff0f958148128b017aeb2175b74a,
title = "Laser-induced temperature rise in anisotropic substrates",
abstract = "Laser-induced temperature rise in anisotropic substrates has been investigated by solving the heat equation in anisotropic media. A model was derived to calculate the laser-induced temperature in anisotropic substrates. It is found that the heat equation in anisotropic media can be simplified to a heat equation in isotropic media by coordinate transformation. The anisotropy of the media can then be reflected by heat source transformation. The results reveal that the laser-induced temperature rise can be significantly affected by the anisotropy of the substrate. The thermal conductivity change along the Z direction (downward into the substrate) will affect the temperature rise more significantly than that along the X and Y directions (parallel to the substrate surface). The anisotropy in thermal conductivity not only affects the peak temperature rise, but also affects the shape of the temperature profile.",
author = "Lu, {Yong Feng}",
year = "1992",
month = "12",
day = "1",
doi = "10.1063/1.352055",
language = "English (US)",
volume = "72",
pages = "4893--4900",
journal = "Journal of Applied Physics",
issn = "0021-8979",
publisher = "American Institute of Physics Publising LLC",
number = "10",

}

TY - JOUR

T1 - Laser-induced temperature rise in anisotropic substrates

AU - Lu, Yong Feng

PY - 1992/12/1

Y1 - 1992/12/1

N2 - Laser-induced temperature rise in anisotropic substrates has been investigated by solving the heat equation in anisotropic media. A model was derived to calculate the laser-induced temperature in anisotropic substrates. It is found that the heat equation in anisotropic media can be simplified to a heat equation in isotropic media by coordinate transformation. The anisotropy of the media can then be reflected by heat source transformation. The results reveal that the laser-induced temperature rise can be significantly affected by the anisotropy of the substrate. The thermal conductivity change along the Z direction (downward into the substrate) will affect the temperature rise more significantly than that along the X and Y directions (parallel to the substrate surface). The anisotropy in thermal conductivity not only affects the peak temperature rise, but also affects the shape of the temperature profile.

AB - Laser-induced temperature rise in anisotropic substrates has been investigated by solving the heat equation in anisotropic media. A model was derived to calculate the laser-induced temperature in anisotropic substrates. It is found that the heat equation in anisotropic media can be simplified to a heat equation in isotropic media by coordinate transformation. The anisotropy of the media can then be reflected by heat source transformation. The results reveal that the laser-induced temperature rise can be significantly affected by the anisotropy of the substrate. The thermal conductivity change along the Z direction (downward into the substrate) will affect the temperature rise more significantly than that along the X and Y directions (parallel to the substrate surface). The anisotropy in thermal conductivity not only affects the peak temperature rise, but also affects the shape of the temperature profile.

UR - http://www.scopus.com/inward/record.url?scp=0342503493&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0342503493&partnerID=8YFLogxK

U2 - 10.1063/1.352055

DO - 10.1063/1.352055

M3 - Article

AN - SCOPUS:0342503493

VL - 72

SP - 4893

EP - 4900

JO - Journal of Applied Physics

JF - Journal of Applied Physics

SN - 0021-8979

IS - 10

ER -