Laser additive manufacturing using nanofabrication by integrated two-photon polymerization and multiphoton ablation

W. Xiong, L. J. Jiang, T. Baldacchini, Yongfeng Lu

Research output: Chapter in Book/Report/Conference proceedingChapter

5 Citations (Scopus)

Abstract

Modern three-dimensional micro-/nanofabrication requires both additive and subtractive processes. However, these two processes are largely isolated and generally regarded as incompatible with each other. In this chapter we introduce both additive two-photon polymerization and subtractive multiphoton ablation techniques and accomplished simultaneous additive and subtractive fabrication processes using two-photon polymerization followed by femtosecond laser multiphoton ablation. Submicron polymer fibers containing periodic holes (500-nm diameter) and microfluidic channels (1-?m diameter) were successfully fabricated. This method combining both two-photon polymerization and femtosecond laser ablation enables the fabrication of complex three-dimensional micro-/nanostructures and is promising for a wide range of applications such as integrated optics, microfluidics, and microelectromechanical systems.

Original languageEnglish (US)
Title of host publicationLaser Additive Manufacturing
Subtitle of host publicationMaterials, Design, Technologies, and Applications
PublisherElsevier Inc.
Pages237-256
Number of pages20
ISBN (Electronic)9780081004340
ISBN (Print)9780081004333
DOIs
StatePublished - Jan 1 2017

Fingerprint

3D printers
Ablation
Nanotechnology
Photons
Polymerization
Ultrashort pulses
Microfluidics
Lasers
Two photon processes
Fabrication
Integrated optics
Laser ablation
MEMS
Nanostructures
Polymers
Fibers

Keywords

  • 3D micro-/nanofabrication
  • Degree of polymerization
  • Femtosecond laser direct writing
  • Multiphoton ablation
  • Raman spectroscopy
  • Two-photon polymerization

ASJC Scopus subject areas

  • Engineering(all)
  • Materials Science(all)

Cite this

Xiong, W., Jiang, L. J., Baldacchini, T., & Lu, Y. (2017). Laser additive manufacturing using nanofabrication by integrated two-photon polymerization and multiphoton ablation. In Laser Additive Manufacturing: Materials, Design, Technologies, and Applications (pp. 237-256). Elsevier Inc.. https://doi.org/10.1016/B978-0-08-100433-3.00009-9

Laser additive manufacturing using nanofabrication by integrated two-photon polymerization and multiphoton ablation. / Xiong, W.; Jiang, L. J.; Baldacchini, T.; Lu, Yongfeng.

Laser Additive Manufacturing: Materials, Design, Technologies, and Applications. Elsevier Inc., 2017. p. 237-256.

Research output: Chapter in Book/Report/Conference proceedingChapter

Xiong, W, Jiang, LJ, Baldacchini, T & Lu, Y 2017, Laser additive manufacturing using nanofabrication by integrated two-photon polymerization and multiphoton ablation. in Laser Additive Manufacturing: Materials, Design, Technologies, and Applications. Elsevier Inc., pp. 237-256. https://doi.org/10.1016/B978-0-08-100433-3.00009-9
Xiong W, Jiang LJ, Baldacchini T, Lu Y. Laser additive manufacturing using nanofabrication by integrated two-photon polymerization and multiphoton ablation. In Laser Additive Manufacturing: Materials, Design, Technologies, and Applications. Elsevier Inc. 2017. p. 237-256 https://doi.org/10.1016/B978-0-08-100433-3.00009-9
Xiong, W. ; Jiang, L. J. ; Baldacchini, T. ; Lu, Yongfeng. / Laser additive manufacturing using nanofabrication by integrated two-photon polymerization and multiphoton ablation. Laser Additive Manufacturing: Materials, Design, Technologies, and Applications. Elsevier Inc., 2017. pp. 237-256
@inbook{aa338064c44c4167b0a861593f8b5e66,
title = "Laser additive manufacturing using nanofabrication by integrated two-photon polymerization and multiphoton ablation",
abstract = "Modern three-dimensional micro-/nanofabrication requires both additive and subtractive processes. However, these two processes are largely isolated and generally regarded as incompatible with each other. In this chapter we introduce both additive two-photon polymerization and subtractive multiphoton ablation techniques and accomplished simultaneous additive and subtractive fabrication processes using two-photon polymerization followed by femtosecond laser multiphoton ablation. Submicron polymer fibers containing periodic holes (500-nm diameter) and microfluidic channels (1-?m diameter) were successfully fabricated. This method combining both two-photon polymerization and femtosecond laser ablation enables the fabrication of complex three-dimensional micro-/nanostructures and is promising for a wide range of applications such as integrated optics, microfluidics, and microelectromechanical systems.",
keywords = "3D micro-/nanofabrication, Degree of polymerization, Femtosecond laser direct writing, Multiphoton ablation, Raman spectroscopy, Two-photon polymerization",
author = "W. Xiong and Jiang, {L. J.} and T. Baldacchini and Yongfeng Lu",
year = "2017",
month = "1",
day = "1",
doi = "10.1016/B978-0-08-100433-3.00009-9",
language = "English (US)",
isbn = "9780081004333",
pages = "237--256",
booktitle = "Laser Additive Manufacturing",
publisher = "Elsevier Inc.",

}

TY - CHAP

T1 - Laser additive manufacturing using nanofabrication by integrated two-photon polymerization and multiphoton ablation

AU - Xiong, W.

AU - Jiang, L. J.

AU - Baldacchini, T.

AU - Lu, Yongfeng

PY - 2017/1/1

Y1 - 2017/1/1

N2 - Modern three-dimensional micro-/nanofabrication requires both additive and subtractive processes. However, these two processes are largely isolated and generally regarded as incompatible with each other. In this chapter we introduce both additive two-photon polymerization and subtractive multiphoton ablation techniques and accomplished simultaneous additive and subtractive fabrication processes using two-photon polymerization followed by femtosecond laser multiphoton ablation. Submicron polymer fibers containing periodic holes (500-nm diameter) and microfluidic channels (1-?m diameter) were successfully fabricated. This method combining both two-photon polymerization and femtosecond laser ablation enables the fabrication of complex three-dimensional micro-/nanostructures and is promising for a wide range of applications such as integrated optics, microfluidics, and microelectromechanical systems.

AB - Modern three-dimensional micro-/nanofabrication requires both additive and subtractive processes. However, these two processes are largely isolated and generally regarded as incompatible with each other. In this chapter we introduce both additive two-photon polymerization and subtractive multiphoton ablation techniques and accomplished simultaneous additive and subtractive fabrication processes using two-photon polymerization followed by femtosecond laser multiphoton ablation. Submicron polymer fibers containing periodic holes (500-nm diameter) and microfluidic channels (1-?m diameter) were successfully fabricated. This method combining both two-photon polymerization and femtosecond laser ablation enables the fabrication of complex three-dimensional micro-/nanostructures and is promising for a wide range of applications such as integrated optics, microfluidics, and microelectromechanical systems.

KW - 3D micro-/nanofabrication

KW - Degree of polymerization

KW - Femtosecond laser direct writing

KW - Multiphoton ablation

KW - Raman spectroscopy

KW - Two-photon polymerization

UR - http://www.scopus.com/inward/record.url?scp=85009841296&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85009841296&partnerID=8YFLogxK

U2 - 10.1016/B978-0-08-100433-3.00009-9

DO - 10.1016/B978-0-08-100433-3.00009-9

M3 - Chapter

SN - 9780081004333

SP - 237

EP - 256

BT - Laser Additive Manufacturing

PB - Elsevier Inc.

ER -