Investigation of toppling ball flight in American football with a mechanical field-goal kicker

Chase M. Pfeifer, Timothy J. Gay, Jeff A. Hawks, Shane M. Farritor, Judith M. Burnfield

Research output: Contribution to journalArticle

Abstract

A mechanical field-goal kicking machine was used to investigate toppling ball flight in American football place-kicking, eliminating a number of uncontrollable impact variables present with a human kicker. Ball flight trajectories were recorded using a triangulation-based projectile tracking system to account for the football’s 3-dimensional position during flight as well as initial launch conditions. The football flights were described using kinematic equations relating to projectile motion including stagnant air drag and were compared to measured trajectories as well as projectile motion equations that exclude stagnant air drag. Measured football flight range deviations from the non-drag equations of projectile motion corresponded to deficits between 9 and 31%, which is described by a football toppling compound drag coefficient of 0.007 ± 0.003 kg/m. Independent variables including impact location and impact angle orientation resulted in 15 impact conditions. We found that an impact location of 5.5 cm from the bottom of the ball maximized trajectory height and distance. At the 5.5-cm impact location, alterations in impact angle produced minimal change in football trajectory, including launch angle (range = 1.96 deg), launch speed (range = 1.06 m/s), and range (range = 0.94 m).

Original languageEnglish (US)
Pages (from-to)95-102
Number of pages8
JournalSports Engineering
Volume21
Issue number2
DOIs
StatePublished - Jun 1 2018

Fingerprint

Football
Projectiles
Ball
Trajectories
Projectile
Drag
Trajectory
Range of data
Drag coefficient
Angle
Triangulation
Air
Motion
Equations of motion
Kinematics
Drag Coefficient
Biomechanical Phenomena
Tracking System
Initial conditions
Deviation

Keywords

  • American football
  • Drag
  • Football
  • Kicking
  • Place-kicking
  • Trajectory

ASJC Scopus subject areas

  • Biomedical Engineering
  • Modeling and Simulation
  • Orthopedics and Sports Medicine
  • Physical Therapy, Sports Therapy and Rehabilitation
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Investigation of toppling ball flight in American football with a mechanical field-goal kicker. / Pfeifer, Chase M.; Gay, Timothy J.; Hawks, Jeff A.; Farritor, Shane M.; Burnfield, Judith M.

In: Sports Engineering, Vol. 21, No. 2, 01.06.2018, p. 95-102.

Research output: Contribution to journalArticle

@article{da0ac382360549f9b8f3649d057b6870,
title = "Investigation of toppling ball flight in American football with a mechanical field-goal kicker",
abstract = "A mechanical field-goal kicking machine was used to investigate toppling ball flight in American football place-kicking, eliminating a number of uncontrollable impact variables present with a human kicker. Ball flight trajectories were recorded using a triangulation-based projectile tracking system to account for the football’s 3-dimensional position during flight as well as initial launch conditions. The football flights were described using kinematic equations relating to projectile motion including stagnant air drag and were compared to measured trajectories as well as projectile motion equations that exclude stagnant air drag. Measured football flight range deviations from the non-drag equations of projectile motion corresponded to deficits between 9 and 31{\%}, which is described by a football toppling compound drag coefficient of 0.007 ± 0.003 kg/m. Independent variables including impact location and impact angle orientation resulted in 15 impact conditions. We found that an impact location of 5.5 cm from the bottom of the ball maximized trajectory height and distance. At the 5.5-cm impact location, alterations in impact angle produced minimal change in football trajectory, including launch angle (range = 1.96 deg), launch speed (range = 1.06 m/s), and range (range = 0.94 m).",
keywords = "American football, Drag, Football, Kicking, Place-kicking, Trajectory",
author = "Pfeifer, {Chase M.} and Gay, {Timothy J.} and Hawks, {Jeff A.} and Farritor, {Shane M.} and Burnfield, {Judith M.}",
year = "2018",
month = "6",
day = "1",
doi = "10.1007/s12283-017-0254-x",
language = "English (US)",
volume = "21",
pages = "95--102",
journal = "Sports Engineering",
issn = "1369-7072",
publisher = "Springer London",
number = "2",

}

TY - JOUR

T1 - Investigation of toppling ball flight in American football with a mechanical field-goal kicker

AU - Pfeifer, Chase M.

AU - Gay, Timothy J.

AU - Hawks, Jeff A.

AU - Farritor, Shane M.

AU - Burnfield, Judith M.

PY - 2018/6/1

Y1 - 2018/6/1

N2 - A mechanical field-goal kicking machine was used to investigate toppling ball flight in American football place-kicking, eliminating a number of uncontrollable impact variables present with a human kicker. Ball flight trajectories were recorded using a triangulation-based projectile tracking system to account for the football’s 3-dimensional position during flight as well as initial launch conditions. The football flights were described using kinematic equations relating to projectile motion including stagnant air drag and were compared to measured trajectories as well as projectile motion equations that exclude stagnant air drag. Measured football flight range deviations from the non-drag equations of projectile motion corresponded to deficits between 9 and 31%, which is described by a football toppling compound drag coefficient of 0.007 ± 0.003 kg/m. Independent variables including impact location and impact angle orientation resulted in 15 impact conditions. We found that an impact location of 5.5 cm from the bottom of the ball maximized trajectory height and distance. At the 5.5-cm impact location, alterations in impact angle produced minimal change in football trajectory, including launch angle (range = 1.96 deg), launch speed (range = 1.06 m/s), and range (range = 0.94 m).

AB - A mechanical field-goal kicking machine was used to investigate toppling ball flight in American football place-kicking, eliminating a number of uncontrollable impact variables present with a human kicker. Ball flight trajectories were recorded using a triangulation-based projectile tracking system to account for the football’s 3-dimensional position during flight as well as initial launch conditions. The football flights were described using kinematic equations relating to projectile motion including stagnant air drag and were compared to measured trajectories as well as projectile motion equations that exclude stagnant air drag. Measured football flight range deviations from the non-drag equations of projectile motion corresponded to deficits between 9 and 31%, which is described by a football toppling compound drag coefficient of 0.007 ± 0.003 kg/m. Independent variables including impact location and impact angle orientation resulted in 15 impact conditions. We found that an impact location of 5.5 cm from the bottom of the ball maximized trajectory height and distance. At the 5.5-cm impact location, alterations in impact angle produced minimal change in football trajectory, including launch angle (range = 1.96 deg), launch speed (range = 1.06 m/s), and range (range = 0.94 m).

KW - American football

KW - Drag

KW - Football

KW - Kicking

KW - Place-kicking

KW - Trajectory

UR - http://www.scopus.com/inward/record.url?scp=85032342585&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85032342585&partnerID=8YFLogxK

U2 - 10.1007/s12283-017-0254-x

DO - 10.1007/s12283-017-0254-x

M3 - Article

AN - SCOPUS:85032342585

VL - 21

SP - 95

EP - 102

JO - Sports Engineering

JF - Sports Engineering

SN - 1369-7072

IS - 2

ER -