Investigation of micro hole drilling in bovine rib using micro rotary ultrasonic machining

A. Sarwade, M. M. Sundaram, K. P. Rajurkar

Research output: Contribution to conferencePaper

3 Citations (Scopus)

Abstract

Micro machining of bone is essential for minimally invasive surgeries and for the preparation of bone surfaces for implants. Micro rotary ultrasonic machining (MRUM) is a recently developed micromachining technique for machining hard and brittle materials with high fracture toughness. In this feasibility study, MRUM was used to drill holes in cortical bovine rib. The effects of machining parameters were studied on the material removal rate (MRR) of the bone and quality of the drilled surface. MRR was found to increase with increase in spindle speed and grit size.

Original languageEnglish (US)
Pages411-416
Number of pages6
StatePublished - Jan 1 2010
Event16th International Symposium on Electromachining, ISEM 2010 - Shanghai, China
Duration: Apr 19 2010Apr 23 2010

Conference

Conference16th International Symposium on Electromachining, ISEM 2010
CountryChina
CityShanghai
Period4/19/104/23/10

Fingerprint

Drilling
Machining
Ultrasonics
Bone
Micromachining
Brittleness
Surgery
Fracture toughness

Keywords

  • Bone machining
  • Drilling
  • Micro rotary ultrasonic machining

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Sarwade, A., Sundaram, M. M., & Rajurkar, K. P. (2010). Investigation of micro hole drilling in bovine rib using micro rotary ultrasonic machining. 411-416. Paper presented at 16th International Symposium on Electromachining, ISEM 2010, Shanghai, China.

Investigation of micro hole drilling in bovine rib using micro rotary ultrasonic machining. / Sarwade, A.; Sundaram, M. M.; Rajurkar, K. P.

2010. 411-416 Paper presented at 16th International Symposium on Electromachining, ISEM 2010, Shanghai, China.

Research output: Contribution to conferencePaper

Sarwade, A, Sundaram, MM & Rajurkar, KP 2010, 'Investigation of micro hole drilling in bovine rib using micro rotary ultrasonic machining', Paper presented at 16th International Symposium on Electromachining, ISEM 2010, Shanghai, China, 4/19/10 - 4/23/10 pp. 411-416.
Sarwade A, Sundaram MM, Rajurkar KP. Investigation of micro hole drilling in bovine rib using micro rotary ultrasonic machining. 2010. Paper presented at 16th International Symposium on Electromachining, ISEM 2010, Shanghai, China.
Sarwade, A. ; Sundaram, M. M. ; Rajurkar, K. P. / Investigation of micro hole drilling in bovine rib using micro rotary ultrasonic machining. Paper presented at 16th International Symposium on Electromachining, ISEM 2010, Shanghai, China.6 p.
@conference{a651d9532a294a1dbdfadf711c8bc026,
title = "Investigation of micro hole drilling in bovine rib using micro rotary ultrasonic machining",
abstract = "Micro machining of bone is essential for minimally invasive surgeries and for the preparation of bone surfaces for implants. Micro rotary ultrasonic machining (MRUM) is a recently developed micromachining technique for machining hard and brittle materials with high fracture toughness. In this feasibility study, MRUM was used to drill holes in cortical bovine rib. The effects of machining parameters were studied on the material removal rate (MRR) of the bone and quality of the drilled surface. MRR was found to increase with increase in spindle speed and grit size.",
keywords = "Bone machining, Drilling, Micro rotary ultrasonic machining",
author = "A. Sarwade and Sundaram, {M. M.} and Rajurkar, {K. P.}",
year = "2010",
month = "1",
day = "1",
language = "English (US)",
pages = "411--416",
note = "16th International Symposium on Electromachining, ISEM 2010 ; Conference date: 19-04-2010 Through 23-04-2010",

}

TY - CONF

T1 - Investigation of micro hole drilling in bovine rib using micro rotary ultrasonic machining

AU - Sarwade, A.

AU - Sundaram, M. M.

AU - Rajurkar, K. P.

PY - 2010/1/1

Y1 - 2010/1/1

N2 - Micro machining of bone is essential for minimally invasive surgeries and for the preparation of bone surfaces for implants. Micro rotary ultrasonic machining (MRUM) is a recently developed micromachining technique for machining hard and brittle materials with high fracture toughness. In this feasibility study, MRUM was used to drill holes in cortical bovine rib. The effects of machining parameters were studied on the material removal rate (MRR) of the bone and quality of the drilled surface. MRR was found to increase with increase in spindle speed and grit size.

AB - Micro machining of bone is essential for minimally invasive surgeries and for the preparation of bone surfaces for implants. Micro rotary ultrasonic machining (MRUM) is a recently developed micromachining technique for machining hard and brittle materials with high fracture toughness. In this feasibility study, MRUM was used to drill holes in cortical bovine rib. The effects of machining parameters were studied on the material removal rate (MRR) of the bone and quality of the drilled surface. MRR was found to increase with increase in spindle speed and grit size.

KW - Bone machining

KW - Drilling

KW - Micro rotary ultrasonic machining

UR - http://www.scopus.com/inward/record.url?scp=84905904857&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84905904857&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84905904857

SP - 411

EP - 416

ER -