Impact of porogens on the pore characteristics of zirconia particles made by polymer-induced colloid aggregation

Abhinandan Pattanayak, Anuradha Subramanian

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

Zirconia particles were prepared from a 20% colloidal sol (ZrO2) by the polymer-induced colloid aggregation (PICA) process, both in the presence and absence of porogens. Specifically, porous zirconia particles having varying porosity were prepared by a two-step protocol wherein a porogen was first embedded during the particle synthesis, followed by its removal in a subsequent step. In this research study, the ability of four different types of porogens, viz. fumed silica, micronized high molecular weight polyethylene emulsion ME09730, and microcrystalline waxes ME48040M2 and ME98040M1, to impact the pore size, porosity, and pore area were investigated. Particle morphology and porosity of the resultant particles were characterized by scanning electron microscopy, mercury intrusion-extrusion porosimetry, and the nitrogen adsorption-desorption sorptometry. Optimal ratios of zirconia sol and porogen to yield the largest unimodal distribution of pores were determined. Porous zirconia particles were obtained after the removal of porogen, followed by a calcination and sintering protocol. Particle aggregates were typically 7-45 μm in diameter, with BET surface areas between 21 and 54 m2/g and pores ranging from 18 to 120 nm in diameter. The nitrogen sorptometry and mercury porosimetry data of these support particles were modeled to calculate surface fractal dimension, pore accessibility parameters, pore network, and pore geometry.

Original languageEnglish (US)
Pages (from-to)94-111
Number of pages18
JournalInternational Journal of Applied Ceramic Technology
Volume8
Issue number1
DOIs
StatePublished - Jan 1 2011

Fingerprint

Colloids
zirconium oxides
Zirconia
Particles (particulate matter)
colloids
Polymers
Agglomeration
porosity
Porosity
polymers
Polymethyl Methacrylate
Sols
Mercury
Nitrogen
Waxes
Polyethylene
Fractal dimension
Emulsions
Silicon Dioxide
Calcination

ASJC Scopus subject areas

  • Ceramics and Composites
  • Condensed Matter Physics
  • Marketing
  • Materials Chemistry

Cite this

@article{60fbe5f963a54f0cb79444d7d317fc13,
title = "Impact of porogens on the pore characteristics of zirconia particles made by polymer-induced colloid aggregation",
abstract = "Zirconia particles were prepared from a 20{\%} colloidal sol (ZrO2) by the polymer-induced colloid aggregation (PICA) process, both in the presence and absence of porogens. Specifically, porous zirconia particles having varying porosity were prepared by a two-step protocol wherein a porogen was first embedded during the particle synthesis, followed by its removal in a subsequent step. In this research study, the ability of four different types of porogens, viz. fumed silica, micronized high molecular weight polyethylene emulsion ME09730, and microcrystalline waxes ME48040M2 and ME98040M1, to impact the pore size, porosity, and pore area were investigated. Particle morphology and porosity of the resultant particles were characterized by scanning electron microscopy, mercury intrusion-extrusion porosimetry, and the nitrogen adsorption-desorption sorptometry. Optimal ratios of zirconia sol and porogen to yield the largest unimodal distribution of pores were determined. Porous zirconia particles were obtained after the removal of porogen, followed by a calcination and sintering protocol. Particle aggregates were typically 7-45 μm in diameter, with BET surface areas between 21 and 54 m2/g and pores ranging from 18 to 120 nm in diameter. The nitrogen sorptometry and mercury porosimetry data of these support particles were modeled to calculate surface fractal dimension, pore accessibility parameters, pore network, and pore geometry.",
author = "Abhinandan Pattanayak and Anuradha Subramanian",
year = "2011",
month = "1",
day = "1",
doi = "10.1111/j.1744-7402.2009.02410.x",
language = "English (US)",
volume = "8",
pages = "94--111",
journal = "International Journal of Applied Ceramic Technology",
issn = "1546-542X",
publisher = "Wiley-Blackwell",
number = "1",

}

TY - JOUR

T1 - Impact of porogens on the pore characteristics of zirconia particles made by polymer-induced colloid aggregation

AU - Pattanayak, Abhinandan

AU - Subramanian, Anuradha

PY - 2011/1/1

Y1 - 2011/1/1

N2 - Zirconia particles were prepared from a 20% colloidal sol (ZrO2) by the polymer-induced colloid aggregation (PICA) process, both in the presence and absence of porogens. Specifically, porous zirconia particles having varying porosity were prepared by a two-step protocol wherein a porogen was first embedded during the particle synthesis, followed by its removal in a subsequent step. In this research study, the ability of four different types of porogens, viz. fumed silica, micronized high molecular weight polyethylene emulsion ME09730, and microcrystalline waxes ME48040M2 and ME98040M1, to impact the pore size, porosity, and pore area were investigated. Particle morphology and porosity of the resultant particles were characterized by scanning electron microscopy, mercury intrusion-extrusion porosimetry, and the nitrogen adsorption-desorption sorptometry. Optimal ratios of zirconia sol and porogen to yield the largest unimodal distribution of pores were determined. Porous zirconia particles were obtained after the removal of porogen, followed by a calcination and sintering protocol. Particle aggregates were typically 7-45 μm in diameter, with BET surface areas between 21 and 54 m2/g and pores ranging from 18 to 120 nm in diameter. The nitrogen sorptometry and mercury porosimetry data of these support particles were modeled to calculate surface fractal dimension, pore accessibility parameters, pore network, and pore geometry.

AB - Zirconia particles were prepared from a 20% colloidal sol (ZrO2) by the polymer-induced colloid aggregation (PICA) process, both in the presence and absence of porogens. Specifically, porous zirconia particles having varying porosity were prepared by a two-step protocol wherein a porogen was first embedded during the particle synthesis, followed by its removal in a subsequent step. In this research study, the ability of four different types of porogens, viz. fumed silica, micronized high molecular weight polyethylene emulsion ME09730, and microcrystalline waxes ME48040M2 and ME98040M1, to impact the pore size, porosity, and pore area were investigated. Particle morphology and porosity of the resultant particles were characterized by scanning electron microscopy, mercury intrusion-extrusion porosimetry, and the nitrogen adsorption-desorption sorptometry. Optimal ratios of zirconia sol and porogen to yield the largest unimodal distribution of pores were determined. Porous zirconia particles were obtained after the removal of porogen, followed by a calcination and sintering protocol. Particle aggregates were typically 7-45 μm in diameter, with BET surface areas between 21 and 54 m2/g and pores ranging from 18 to 120 nm in diameter. The nitrogen sorptometry and mercury porosimetry data of these support particles were modeled to calculate surface fractal dimension, pore accessibility parameters, pore network, and pore geometry.

UR - http://www.scopus.com/inward/record.url?scp=78651098380&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=78651098380&partnerID=8YFLogxK

U2 - 10.1111/j.1744-7402.2009.02410.x

DO - 10.1111/j.1744-7402.2009.02410.x

M3 - Article

AN - SCOPUS:78651098380

VL - 8

SP - 94

EP - 111

JO - International Journal of Applied Ceramic Technology

JF - International Journal of Applied Ceramic Technology

SN - 1546-542X

IS - 1

ER -