Grafting soyprotein isolates with various methacrylates for thermoplastic applications

Zhen Shi, Narendra Reddy, Li Shen, Xiuliang Hou, Yiqi Yang

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

Soyprotein isolates were grafted with four different methacrylates and compression molded into films with good dry and wet tensile properties. Soyprotein isolates are obtained as coproducts during soybean processing, have unique properties and have been widely studied for various industrial applications. Although films with properties suitable for various applications have been developed from soyproteins by solution casting, attempts to obtain thermoplastics from soyproteins with high strength and stability under aqueous environments have not been successful. In this research, soyproteins were grafted with methyl methacrylate (MMA), ethyl methacrylate (EMA), butyl methacrylate (BMA) and hexyl methacrylate (HMA) and the grafting conditions were optimized. Influence of grafting conditions on % monomer conversion, % grafting efficiency and % homopolymers were studied. Grafted samples were analyzed for their thermal behavior using thermogravimetric analysis (TGA) and differential scanning calorimeter (DSC) and grafting was confirmed using nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR). Grafted samples were compression molded into films and the influence of % homopolymers on tensile properties was investigated. It was found that increasing length of alkyl chains decreased grafting efficiency but improved the thermal behavior and provided films with better properties. At high humidity (90%), HMA grafted soyprotein films containing 25% homopolymers retained about 73% of their dry strength, had elongation of 16.5%, better than thermoplastic films previously developed from soyprotein isolates.

Original languageEnglish (US)
Pages (from-to)168-176
Number of pages9
JournalIndustrial Crops and Products
Volume60
DOIs
StatePublished - Jan 1 2014

Fingerprint

thermoplastics
films (materials)
thermogravimetry
heat
coproducts
calorimeters
industrial applications
nuclear magnetic resonance spectroscopy
humidity
soybeans
sampling

Keywords

  • Films
  • Grafting
  • Monomers
  • Soyproteins
  • Tensile properties
  • Thermoplastics

ASJC Scopus subject areas

  • Agronomy and Crop Science

Cite this

Grafting soyprotein isolates with various methacrylates for thermoplastic applications. / Shi, Zhen; Reddy, Narendra; Shen, Li; Hou, Xiuliang; Yang, Yiqi.

In: Industrial Crops and Products, Vol. 60, 01.01.2014, p. 168-176.

Research output: Contribution to journalArticle

Shi, Zhen ; Reddy, Narendra ; Shen, Li ; Hou, Xiuliang ; Yang, Yiqi. / Grafting soyprotein isolates with various methacrylates for thermoplastic applications. In: Industrial Crops and Products. 2014 ; Vol. 60. pp. 168-176.
@article{cd9fb5d2e2a94e80954482892268a283,
title = "Grafting soyprotein isolates with various methacrylates for thermoplastic applications",
abstract = "Soyprotein isolates were grafted with four different methacrylates and compression molded into films with good dry and wet tensile properties. Soyprotein isolates are obtained as coproducts during soybean processing, have unique properties and have been widely studied for various industrial applications. Although films with properties suitable for various applications have been developed from soyproteins by solution casting, attempts to obtain thermoplastics from soyproteins with high strength and stability under aqueous environments have not been successful. In this research, soyproteins were grafted with methyl methacrylate (MMA), ethyl methacrylate (EMA), butyl methacrylate (BMA) and hexyl methacrylate (HMA) and the grafting conditions were optimized. Influence of grafting conditions on {\%} monomer conversion, {\%} grafting efficiency and {\%} homopolymers were studied. Grafted samples were analyzed for their thermal behavior using thermogravimetric analysis (TGA) and differential scanning calorimeter (DSC) and grafting was confirmed using nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR). Grafted samples were compression molded into films and the influence of {\%} homopolymers on tensile properties was investigated. It was found that increasing length of alkyl chains decreased grafting efficiency but improved the thermal behavior and provided films with better properties. At high humidity (90{\%}), HMA grafted soyprotein films containing 25{\%} homopolymers retained about 73{\%} of their dry strength, had elongation of 16.5{\%}, better than thermoplastic films previously developed from soyprotein isolates.",
keywords = "Films, Grafting, Monomers, Soyproteins, Tensile properties, Thermoplastics",
author = "Zhen Shi and Narendra Reddy and Li Shen and Xiuliang Hou and Yiqi Yang",
year = "2014",
month = "1",
day = "1",
doi = "10.1016/j.indcrop.2014.06.026",
language = "English (US)",
volume = "60",
pages = "168--176",
journal = "Industrial Crops and Products",
issn = "0926-6690",
publisher = "Elsevier",

}

TY - JOUR

T1 - Grafting soyprotein isolates with various methacrylates for thermoplastic applications

AU - Shi, Zhen

AU - Reddy, Narendra

AU - Shen, Li

AU - Hou, Xiuliang

AU - Yang, Yiqi

PY - 2014/1/1

Y1 - 2014/1/1

N2 - Soyprotein isolates were grafted with four different methacrylates and compression molded into films with good dry and wet tensile properties. Soyprotein isolates are obtained as coproducts during soybean processing, have unique properties and have been widely studied for various industrial applications. Although films with properties suitable for various applications have been developed from soyproteins by solution casting, attempts to obtain thermoplastics from soyproteins with high strength and stability under aqueous environments have not been successful. In this research, soyproteins were grafted with methyl methacrylate (MMA), ethyl methacrylate (EMA), butyl methacrylate (BMA) and hexyl methacrylate (HMA) and the grafting conditions were optimized. Influence of grafting conditions on % monomer conversion, % grafting efficiency and % homopolymers were studied. Grafted samples were analyzed for their thermal behavior using thermogravimetric analysis (TGA) and differential scanning calorimeter (DSC) and grafting was confirmed using nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR). Grafted samples were compression molded into films and the influence of % homopolymers on tensile properties was investigated. It was found that increasing length of alkyl chains decreased grafting efficiency but improved the thermal behavior and provided films with better properties. At high humidity (90%), HMA grafted soyprotein films containing 25% homopolymers retained about 73% of their dry strength, had elongation of 16.5%, better than thermoplastic films previously developed from soyprotein isolates.

AB - Soyprotein isolates were grafted with four different methacrylates and compression molded into films with good dry and wet tensile properties. Soyprotein isolates are obtained as coproducts during soybean processing, have unique properties and have been widely studied for various industrial applications. Although films with properties suitable for various applications have been developed from soyproteins by solution casting, attempts to obtain thermoplastics from soyproteins with high strength and stability under aqueous environments have not been successful. In this research, soyproteins were grafted with methyl methacrylate (MMA), ethyl methacrylate (EMA), butyl methacrylate (BMA) and hexyl methacrylate (HMA) and the grafting conditions were optimized. Influence of grafting conditions on % monomer conversion, % grafting efficiency and % homopolymers were studied. Grafted samples were analyzed for their thermal behavior using thermogravimetric analysis (TGA) and differential scanning calorimeter (DSC) and grafting was confirmed using nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR). Grafted samples were compression molded into films and the influence of % homopolymers on tensile properties was investigated. It was found that increasing length of alkyl chains decreased grafting efficiency but improved the thermal behavior and provided films with better properties. At high humidity (90%), HMA grafted soyprotein films containing 25% homopolymers retained about 73% of their dry strength, had elongation of 16.5%, better than thermoplastic films previously developed from soyprotein isolates.

KW - Films

KW - Grafting

KW - Monomers

KW - Soyproteins

KW - Tensile properties

KW - Thermoplastics

UR - http://www.scopus.com/inward/record.url?scp=84903581480&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84903581480&partnerID=8YFLogxK

U2 - 10.1016/j.indcrop.2014.06.026

DO - 10.1016/j.indcrop.2014.06.026

M3 - Article

VL - 60

SP - 168

EP - 176

JO - Industrial Crops and Products

JF - Industrial Crops and Products

SN - 0926-6690

ER -