Fabrication and finite element analysis of micro dents using μ-laser shock peening

Michael P. Sealy, Y. B. Guo, M. F. Horstemeyer

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Laser shock peening (LSP) is an innovative surface treatment developed to improve surface integrity. This study explores the feasibility using LSP to direct-write surface micro dents for lubricant retention. Since LSP is a highly transient process with a pulse duration of 10 - 100 ns, a real time in-situ measurement of laser/material interaction such as transient stresses/strains is challenging. Therefore, a 3D finite element simulation of micro-scale laser shock peening was developed to determine the effect of laser pulse duration and peak pressure on the transient material behaviors of titanium Ti-6A1-4V. The simulated dent geometry is similar to the measured dent geometry in terms of morphology. The results suggested there is an optimal peening time that produces the deepest dent. The maximum transient stress in peening direction occurred at a certain laser pulse time. However, the stress along the depth and radius were drastically affected by the peak pressures.

Original languageEnglish (US)
Title of host publicationProceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008
Pages237-244
Number of pages8
DOIs
StatePublished - Dec 1 2009
EventASME International Manufacturing Science and Engineering Conference, MSEC2008 - Evanston, IL, United States
Duration: Oct 7 2008Oct 10 2008

Publication series

NameProceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008
Volume1

Conference

ConferenceASME International Manufacturing Science and Engineering Conference, MSEC2008
CountryUnited States
CityEvanston, IL
Period10/7/0810/10/08

Fingerprint

Shot peening
Finite element method
Fabrication
Lasers
Laser pulses
Geometry
Lubricants
Surface treatment
Titanium

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering
  • Mechanical Engineering

Cite this

Sealy, M. P., Guo, Y. B., & Horstemeyer, M. F. (2009). Fabrication and finite element analysis of micro dents using μ-laser shock peening. In Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008 (pp. 237-244). (Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008; Vol. 1). https://doi.org/10.1115/MSEC_ICMP2008-72231

Fabrication and finite element analysis of micro dents using μ-laser shock peening. / Sealy, Michael P.; Guo, Y. B.; Horstemeyer, M. F.

Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008. 2009. p. 237-244 (Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008; Vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sealy, MP, Guo, YB & Horstemeyer, MF 2009, Fabrication and finite element analysis of micro dents using μ-laser shock peening. in Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008. Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008, vol. 1, pp. 237-244, ASME International Manufacturing Science and Engineering Conference, MSEC2008, Evanston, IL, United States, 10/7/08. https://doi.org/10.1115/MSEC_ICMP2008-72231
Sealy MP, Guo YB, Horstemeyer MF. Fabrication and finite element analysis of micro dents using μ-laser shock peening. In Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008. 2009. p. 237-244. (Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008). https://doi.org/10.1115/MSEC_ICMP2008-72231
Sealy, Michael P. ; Guo, Y. B. ; Horstemeyer, M. F. / Fabrication and finite element analysis of micro dents using μ-laser shock peening. Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008. 2009. pp. 237-244 (Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008).
@inproceedings{8584b7e7b2d74378a9363f87b9ed4b5a,
title = "Fabrication and finite element analysis of micro dents using μ-laser shock peening",
abstract = "Laser shock peening (LSP) is an innovative surface treatment developed to improve surface integrity. This study explores the feasibility using LSP to direct-write surface micro dents for lubricant retention. Since LSP is a highly transient process with a pulse duration of 10 - 100 ns, a real time in-situ measurement of laser/material interaction such as transient stresses/strains is challenging. Therefore, a 3D finite element simulation of micro-scale laser shock peening was developed to determine the effect of laser pulse duration and peak pressure on the transient material behaviors of titanium Ti-6A1-4V. The simulated dent geometry is similar to the measured dent geometry in terms of morphology. The results suggested there is an optimal peening time that produces the deepest dent. The maximum transient stress in peening direction occurred at a certain laser pulse time. However, the stress along the depth and radius were drastically affected by the peak pressures.",
author = "Sealy, {Michael P.} and Guo, {Y. B.} and Horstemeyer, {M. F.}",
year = "2009",
month = "12",
day = "1",
doi = "10.1115/MSEC_ICMP2008-72231",
language = "English (US)",
isbn = "9780791848517",
series = "Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008",
pages = "237--244",
booktitle = "Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008",

}

TY - GEN

T1 - Fabrication and finite element analysis of micro dents using μ-laser shock peening

AU - Sealy, Michael P.

AU - Guo, Y. B.

AU - Horstemeyer, M. F.

PY - 2009/12/1

Y1 - 2009/12/1

N2 - Laser shock peening (LSP) is an innovative surface treatment developed to improve surface integrity. This study explores the feasibility using LSP to direct-write surface micro dents for lubricant retention. Since LSP is a highly transient process with a pulse duration of 10 - 100 ns, a real time in-situ measurement of laser/material interaction such as transient stresses/strains is challenging. Therefore, a 3D finite element simulation of micro-scale laser shock peening was developed to determine the effect of laser pulse duration and peak pressure on the transient material behaviors of titanium Ti-6A1-4V. The simulated dent geometry is similar to the measured dent geometry in terms of morphology. The results suggested there is an optimal peening time that produces the deepest dent. The maximum transient stress in peening direction occurred at a certain laser pulse time. However, the stress along the depth and radius were drastically affected by the peak pressures.

AB - Laser shock peening (LSP) is an innovative surface treatment developed to improve surface integrity. This study explores the feasibility using LSP to direct-write surface micro dents for lubricant retention. Since LSP is a highly transient process with a pulse duration of 10 - 100 ns, a real time in-situ measurement of laser/material interaction such as transient stresses/strains is challenging. Therefore, a 3D finite element simulation of micro-scale laser shock peening was developed to determine the effect of laser pulse duration and peak pressure on the transient material behaviors of titanium Ti-6A1-4V. The simulated dent geometry is similar to the measured dent geometry in terms of morphology. The results suggested there is an optimal peening time that produces the deepest dent. The maximum transient stress in peening direction occurred at a certain laser pulse time. However, the stress along the depth and radius were drastically affected by the peak pressures.

UR - http://www.scopus.com/inward/record.url?scp=77951279774&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77951279774&partnerID=8YFLogxK

U2 - 10.1115/MSEC_ICMP2008-72231

DO - 10.1115/MSEC_ICMP2008-72231

M3 - Conference contribution

AN - SCOPUS:77951279774

SN - 9780791848517

T3 - Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008

SP - 237

EP - 244

BT - Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008

ER -