Experimental investigation and characterization of nano-scale dry electro-machining

Muhammad P. Jahan, Ajay P. Malshe, Kamlakar P Rajurkar

Research output: Contribution to journalArticle

14 Citations (Scopus)

Abstract

This paper presents an experimental investigation and characterization of a novel technique of nanoscale electro-machining (EM) in atmospheric air, named dry nano-EM, by using scanning tunneling microscopy (STM) as the platform for nanomachining. The electro-machining has been conducted in near field by maintaining a gap distance of 1-2 nm between the Platinum-Iridium [Pt-Ir (80:20)] tool electrode and atomically flat gold substrate with the air as dielectric medium. An in situ process of evaluating the tool quality before and after machining has been used by monitoring the current-displacement (I-Z) spectroscopy curves. The mechanism of dry nano-EM has been presented as well as the machining performance of the process has been evaluated. Based on the observations, it has been established that field induced evaporation due to intense heat generated at the gap width is the primary mechanism of material removal in dry nano-EM. The experimental results show that dry nano-EM is capable of fabricating consistent nano-features with good repeatability. The volume of material removal increases almost linearly with increasing number of features machined and machining time, indicating the consistency in the dimensions of the nano-features. Finally, dry nano-EM is established as a technique capable of machining 50-100 features in a pre-defined manner with average feature size of 7.5-10 nm in a single pass, thus suitable for nano-patterning in atomically flat electrically conducting surfaces.

Original languageEnglish (US)
Pages (from-to)443-451
Number of pages9
JournalJournal of Manufacturing Processes
Volume14
Issue number4
DOIs
StatePublished - Oct 1 2012

Fingerprint

Machining
Iridium
Scanning tunneling microscopy
Air
Platinum
Evaporation
Gold
Spectroscopy
Electrodes
Monitoring
Substrates

Keywords

  • Dry nano-EM
  • Machining performance
  • Nano-electro machining (nano-EM)

ASJC Scopus subject areas

  • Strategy and Management
  • Management Science and Operations Research
  • Industrial and Manufacturing Engineering

Cite this

Experimental investigation and characterization of nano-scale dry electro-machining. / Jahan, Muhammad P.; Malshe, Ajay P.; Rajurkar, Kamlakar P.

In: Journal of Manufacturing Processes, Vol. 14, No. 4, 01.10.2012, p. 443-451.

Research output: Contribution to journalArticle

@article{3d4d6e1d1c5b489095b5354c7ed659d2,
title = "Experimental investigation and characterization of nano-scale dry electro-machining",
abstract = "This paper presents an experimental investigation and characterization of a novel technique of nanoscale electro-machining (EM) in atmospheric air, named dry nano-EM, by using scanning tunneling microscopy (STM) as the platform for nanomachining. The electro-machining has been conducted in near field by maintaining a gap distance of 1-2 nm between the Platinum-Iridium [Pt-Ir (80:20)] tool electrode and atomically flat gold substrate with the air as dielectric medium. An in situ process of evaluating the tool quality before and after machining has been used by monitoring the current-displacement (I-Z) spectroscopy curves. The mechanism of dry nano-EM has been presented as well as the machining performance of the process has been evaluated. Based on the observations, it has been established that field induced evaporation due to intense heat generated at the gap width is the primary mechanism of material removal in dry nano-EM. The experimental results show that dry nano-EM is capable of fabricating consistent nano-features with good repeatability. The volume of material removal increases almost linearly with increasing number of features machined and machining time, indicating the consistency in the dimensions of the nano-features. Finally, dry nano-EM is established as a technique capable of machining 50-100 features in a pre-defined manner with average feature size of 7.5-10 nm in a single pass, thus suitable for nano-patterning in atomically flat electrically conducting surfaces.",
keywords = "Dry nano-EM, Machining performance, Nano-electro machining (nano-EM)",
author = "Jahan, {Muhammad P.} and Malshe, {Ajay P.} and Rajurkar, {Kamlakar P}",
year = "2012",
month = "10",
day = "1",
doi = "10.1016/j.jmapro.2012.08.004",
language = "English (US)",
volume = "14",
pages = "443--451",
journal = "Journal of Manufacturing Processes",
issn = "1526-6125",
publisher = "Elsevier BV",
number = "4",

}

TY - JOUR

T1 - Experimental investigation and characterization of nano-scale dry electro-machining

AU - Jahan, Muhammad P.

AU - Malshe, Ajay P.

AU - Rajurkar, Kamlakar P

PY - 2012/10/1

Y1 - 2012/10/1

N2 - This paper presents an experimental investigation and characterization of a novel technique of nanoscale electro-machining (EM) in atmospheric air, named dry nano-EM, by using scanning tunneling microscopy (STM) as the platform for nanomachining. The electro-machining has been conducted in near field by maintaining a gap distance of 1-2 nm between the Platinum-Iridium [Pt-Ir (80:20)] tool electrode and atomically flat gold substrate with the air as dielectric medium. An in situ process of evaluating the tool quality before and after machining has been used by monitoring the current-displacement (I-Z) spectroscopy curves. The mechanism of dry nano-EM has been presented as well as the machining performance of the process has been evaluated. Based on the observations, it has been established that field induced evaporation due to intense heat generated at the gap width is the primary mechanism of material removal in dry nano-EM. The experimental results show that dry nano-EM is capable of fabricating consistent nano-features with good repeatability. The volume of material removal increases almost linearly with increasing number of features machined and machining time, indicating the consistency in the dimensions of the nano-features. Finally, dry nano-EM is established as a technique capable of machining 50-100 features in a pre-defined manner with average feature size of 7.5-10 nm in a single pass, thus suitable for nano-patterning in atomically flat electrically conducting surfaces.

AB - This paper presents an experimental investigation and characterization of a novel technique of nanoscale electro-machining (EM) in atmospheric air, named dry nano-EM, by using scanning tunneling microscopy (STM) as the platform for nanomachining. The electro-machining has been conducted in near field by maintaining a gap distance of 1-2 nm between the Platinum-Iridium [Pt-Ir (80:20)] tool electrode and atomically flat gold substrate with the air as dielectric medium. An in situ process of evaluating the tool quality before and after machining has been used by monitoring the current-displacement (I-Z) spectroscopy curves. The mechanism of dry nano-EM has been presented as well as the machining performance of the process has been evaluated. Based on the observations, it has been established that field induced evaporation due to intense heat generated at the gap width is the primary mechanism of material removal in dry nano-EM. The experimental results show that dry nano-EM is capable of fabricating consistent nano-features with good repeatability. The volume of material removal increases almost linearly with increasing number of features machined and machining time, indicating the consistency in the dimensions of the nano-features. Finally, dry nano-EM is established as a technique capable of machining 50-100 features in a pre-defined manner with average feature size of 7.5-10 nm in a single pass, thus suitable for nano-patterning in atomically flat electrically conducting surfaces.

KW - Dry nano-EM

KW - Machining performance

KW - Nano-electro machining (nano-EM)

UR - http://www.scopus.com/inward/record.url?scp=84869097625&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84869097625&partnerID=8YFLogxK

U2 - 10.1016/j.jmapro.2012.08.004

DO - 10.1016/j.jmapro.2012.08.004

M3 - Article

VL - 14

SP - 443

EP - 451

JO - Journal of Manufacturing Processes

JF - Journal of Manufacturing Processes

SN - 1526-6125

IS - 4

ER -