Experimental and numerical investigation of carbon fiber sandwich panels subjected to blast loading

Yi Hua, Praveen Kumar Akula, Linxia Gu

Research output: Contribution to journalArticle

12 Scopus citations

Abstract

The objective of this paper is to investigate the structural response of carbon fiber sandwich panels subjected to blast loading through an integrated experimental and numerical approach. A total of nine experiments, corresponding to three different blast intensity levels were conducted in the 28-inch square shock tube apparatus. Computational models were developed to capture the experimental details and further study the mechanism of blast wave-sandwich panel interactions. The peak reflected overpressure was monitored, which amplified to approximately 2.5 times of the incident overpressure due to fluid-structure interactions. The measured strain histories demonstrated opposite phases at the center of the front and back facesheets. Both strains showed damped oscillation with a reduced oscillation frequency as well as amplified facesheet deformations at the higher blast intensity. As the blast wave traversed across the panel, the observed flow separation and reattachment led to pressure increase at the back side of the panel. Further parametric studies suggested that the maximum deflection of the back facesheet increased dramatically with higher blast intensity and decreased with larger facesheet and core thickness. Our computational models, calibrated by experimental measurements, could be used as a virtual tool for assessing the mechanism of blast-panel interactions, and predicting the structural response of composite panels subjected to blast loading.

Original languageEnglish (US)
Pages (from-to)456-463
Number of pages8
JournalComposites Part B: Engineering
Volume56
DOIs
Publication statusPublished - Jan 1 2014

    Fingerprint

Keywords

  • A. Layered structures
  • B. Impact behavior
  • B. Interface/interphase
  • C. Finite element analysis
  • Shock tube testing

ASJC Scopus subject areas

  • Ceramics and Composites
  • Mechanics of Materials
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Cite this