Enhancing the Bioaccessibility of Phytosterols Using Nanoporous Corn and Wheat Starch Bioaerogels

Ali Ubeyitogullari, Regis F Moreau, Devin J Rose, Jian Zhang, Ozan N. Ciftci

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Bioavailability of phytosterols is very low due to their crystalline structure and poor water solubility, limiting their potential health benefits. In this study, a novel approach to forming low crystallinity phytosterol nanoparticles is developed using nanoporous starch aerogels, namely wheat starch aerogels (WSAs) and corn starch aerogels (CSA), in combination with supercritical carbon dioxide (SC-CO2) to improve the bioaccessibility and in turn bioavailability of phytosterols. Starch aerogels with outstanding properties (WSA with a surface area of 62 m2 g−1 and pore size of 19 nm; CSA with a surface area of 221 m2 g−1 and pore size of 7 nm) were used as a mold to form phytosterol nanoparticles. The highest phytosterol impregnation capacity is obtained with CSA monolith (195 mg phytosterols/g CSA). Impregnation into powder or monolithic forms of the aerogels resulted in different phytosterol morphology where the monolithic form prevented formation of large plate-like phytosterol crystals. Impregnation into WSA monolith (WSA-M) generated low crystallinity phytosterol nanoparticles (70 nm). Bioaccessibility of the phytosterols increased by 20-fold when impregnated into WSA-M. The hydrolysis of CSA (30–39%) was lower than that of WSA (55–59%) during simulated digestion, which negatively affected the release of phytosterols. Practical applications: Practical applications include: i) a novel process that can decrease the size and crystallinity of phytosterols and thus improve their bioavailability; ii) a blueprint to apply to other water insoluble food bioactives; and iii) the transfer of green technology to food manufacturers. Longer-term, this novel approach will (i) improve the health benefits of water-insoluble bioactives; ii) enable food manufacturers to add water-insoluble bioactives into low- and high-fat foods to produce health-promoting foods; iii) improve public health through diet; iv) enhance the cost-benefit ratio of water insoluble bioactives; v) avert toxic chemicals and environmental pollution; and vi) lower the costs of handling, storage, and transportation of bioactives. Bioavailability of phytosterols is very low due to their crystalline structure and poor water solubility, limiting their potential health benefits. Our novel approach to forming first-of-its-kind low-crystallinity phytosterol nanoparticles are developed using nanoporous starch aerogels in combination with supercritical carbon dioxide to improve the bioaccessibility and in turn bioavailability of phytosterols. The novel low-crystallinity phytosterol nanoparticles are 20-folds more bioaccessible compared to the crude phytosterols after simulated digestion.

Original languageEnglish (US)
Article number1700229
JournalEuropean Journal of Lipid Science and Technology
Volume121
Issue number1
DOIs
StatePublished - Jan 2019

Fingerprint

Phytosterols
wheat starch
Aerogels
phytosterols
corn starch
Starch
Triticum
Zea mays
nanoparticles
Nanoparticles
Biological Availability
bioavailability
Health
Impregnation
Water
Insurance Benefits
Food
Oils and fats
carbon dioxide
water solubility

Keywords

  • aerogels
  • bioaccessibility
  • nanoparticles
  • phytosterols
  • starch
  • supercritical

ASJC Scopus subject areas

  • Biotechnology
  • Food Science
  • Chemistry(all)
  • Industrial and Manufacturing Engineering

Cite this

Enhancing the Bioaccessibility of Phytosterols Using Nanoporous Corn and Wheat Starch Bioaerogels. / Ubeyitogullari, Ali; Moreau, Regis F; Rose, Devin J; Zhang, Jian; Ciftci, Ozan N.

In: European Journal of Lipid Science and Technology, Vol. 121, No. 1, 1700229, 01.2019.

Research output: Contribution to journalArticle

@article{7204b6926af4423794823ad1b1ea7c52,
title = "Enhancing the Bioaccessibility of Phytosterols Using Nanoporous Corn and Wheat Starch Bioaerogels",
abstract = "Bioavailability of phytosterols is very low due to their crystalline structure and poor water solubility, limiting their potential health benefits. In this study, a novel approach to forming low crystallinity phytosterol nanoparticles is developed using nanoporous starch aerogels, namely wheat starch aerogels (WSAs) and corn starch aerogels (CSA), in combination with supercritical carbon dioxide (SC-CO2) to improve the bioaccessibility and in turn bioavailability of phytosterols. Starch aerogels with outstanding properties (WSA with a surface area of 62 m2 g−1 and pore size of 19 nm; CSA with a surface area of 221 m2 g−1 and pore size of 7 nm) were used as a mold to form phytosterol nanoparticles. The highest phytosterol impregnation capacity is obtained with CSA monolith (195 mg phytosterols/g CSA). Impregnation into powder or monolithic forms of the aerogels resulted in different phytosterol morphology where the monolithic form prevented formation of large plate-like phytosterol crystals. Impregnation into WSA monolith (WSA-M) generated low crystallinity phytosterol nanoparticles (70 nm). Bioaccessibility of the phytosterols increased by 20-fold when impregnated into WSA-M. The hydrolysis of CSA (30–39{\%}) was lower than that of WSA (55–59{\%}) during simulated digestion, which negatively affected the release of phytosterols. Practical applications: Practical applications include: i) a novel process that can decrease the size and crystallinity of phytosterols and thus improve their bioavailability; ii) a blueprint to apply to other water insoluble food bioactives; and iii) the transfer of green technology to food manufacturers. Longer-term, this novel approach will (i) improve the health benefits of water-insoluble bioactives; ii) enable food manufacturers to add water-insoluble bioactives into low- and high-fat foods to produce health-promoting foods; iii) improve public health through diet; iv) enhance the cost-benefit ratio of water insoluble bioactives; v) avert toxic chemicals and environmental pollution; and vi) lower the costs of handling, storage, and transportation of bioactives. Bioavailability of phytosterols is very low due to their crystalline structure and poor water solubility, limiting their potential health benefits. Our novel approach to forming first-of-its-kind low-crystallinity phytosterol nanoparticles are developed using nanoporous starch aerogels in combination with supercritical carbon dioxide to improve the bioaccessibility and in turn bioavailability of phytosterols. The novel low-crystallinity phytosterol nanoparticles are 20-folds more bioaccessible compared to the crude phytosterols after simulated digestion.",
keywords = "aerogels, bioaccessibility, nanoparticles, phytosterols, starch, supercritical",
author = "Ali Ubeyitogullari and Moreau, {Regis F} and Rose, {Devin J} and Jian Zhang and Ciftci, {Ozan N.}",
year = "2019",
month = "1",
doi = "10.1002/ejlt.201700229",
language = "English (US)",
volume = "121",
journal = "European Journal of Lipid Science and Technology",
issn = "1438-7697",
publisher = "Wiley-VCH Verlag",
number = "1",

}

TY - JOUR

T1 - Enhancing the Bioaccessibility of Phytosterols Using Nanoporous Corn and Wheat Starch Bioaerogels

AU - Ubeyitogullari, Ali

AU - Moreau, Regis F

AU - Rose, Devin J

AU - Zhang, Jian

AU - Ciftci, Ozan N.

PY - 2019/1

Y1 - 2019/1

N2 - Bioavailability of phytosterols is very low due to their crystalline structure and poor water solubility, limiting their potential health benefits. In this study, a novel approach to forming low crystallinity phytosterol nanoparticles is developed using nanoporous starch aerogels, namely wheat starch aerogels (WSAs) and corn starch aerogels (CSA), in combination with supercritical carbon dioxide (SC-CO2) to improve the bioaccessibility and in turn bioavailability of phytosterols. Starch aerogels with outstanding properties (WSA with a surface area of 62 m2 g−1 and pore size of 19 nm; CSA with a surface area of 221 m2 g−1 and pore size of 7 nm) were used as a mold to form phytosterol nanoparticles. The highest phytosterol impregnation capacity is obtained with CSA monolith (195 mg phytosterols/g CSA). Impregnation into powder or monolithic forms of the aerogels resulted in different phytosterol morphology where the monolithic form prevented formation of large plate-like phytosterol crystals. Impregnation into WSA monolith (WSA-M) generated low crystallinity phytosterol nanoparticles (70 nm). Bioaccessibility of the phytosterols increased by 20-fold when impregnated into WSA-M. The hydrolysis of CSA (30–39%) was lower than that of WSA (55–59%) during simulated digestion, which negatively affected the release of phytosterols. Practical applications: Practical applications include: i) a novel process that can decrease the size and crystallinity of phytosterols and thus improve their bioavailability; ii) a blueprint to apply to other water insoluble food bioactives; and iii) the transfer of green technology to food manufacturers. Longer-term, this novel approach will (i) improve the health benefits of water-insoluble bioactives; ii) enable food manufacturers to add water-insoluble bioactives into low- and high-fat foods to produce health-promoting foods; iii) improve public health through diet; iv) enhance the cost-benefit ratio of water insoluble bioactives; v) avert toxic chemicals and environmental pollution; and vi) lower the costs of handling, storage, and transportation of bioactives. Bioavailability of phytosterols is very low due to their crystalline structure and poor water solubility, limiting their potential health benefits. Our novel approach to forming first-of-its-kind low-crystallinity phytosterol nanoparticles are developed using nanoporous starch aerogels in combination with supercritical carbon dioxide to improve the bioaccessibility and in turn bioavailability of phytosterols. The novel low-crystallinity phytosterol nanoparticles are 20-folds more bioaccessible compared to the crude phytosterols after simulated digestion.

AB - Bioavailability of phytosterols is very low due to their crystalline structure and poor water solubility, limiting their potential health benefits. In this study, a novel approach to forming low crystallinity phytosterol nanoparticles is developed using nanoporous starch aerogels, namely wheat starch aerogels (WSAs) and corn starch aerogels (CSA), in combination with supercritical carbon dioxide (SC-CO2) to improve the bioaccessibility and in turn bioavailability of phytosterols. Starch aerogels with outstanding properties (WSA with a surface area of 62 m2 g−1 and pore size of 19 nm; CSA with a surface area of 221 m2 g−1 and pore size of 7 nm) were used as a mold to form phytosterol nanoparticles. The highest phytosterol impregnation capacity is obtained with CSA monolith (195 mg phytosterols/g CSA). Impregnation into powder or monolithic forms of the aerogels resulted in different phytosterol morphology where the monolithic form prevented formation of large plate-like phytosterol crystals. Impregnation into WSA monolith (WSA-M) generated low crystallinity phytosterol nanoparticles (70 nm). Bioaccessibility of the phytosterols increased by 20-fold when impregnated into WSA-M. The hydrolysis of CSA (30–39%) was lower than that of WSA (55–59%) during simulated digestion, which negatively affected the release of phytosterols. Practical applications: Practical applications include: i) a novel process that can decrease the size and crystallinity of phytosterols and thus improve their bioavailability; ii) a blueprint to apply to other water insoluble food bioactives; and iii) the transfer of green technology to food manufacturers. Longer-term, this novel approach will (i) improve the health benefits of water-insoluble bioactives; ii) enable food manufacturers to add water-insoluble bioactives into low- and high-fat foods to produce health-promoting foods; iii) improve public health through diet; iv) enhance the cost-benefit ratio of water insoluble bioactives; v) avert toxic chemicals and environmental pollution; and vi) lower the costs of handling, storage, and transportation of bioactives. Bioavailability of phytosterols is very low due to their crystalline structure and poor water solubility, limiting their potential health benefits. Our novel approach to forming first-of-its-kind low-crystallinity phytosterol nanoparticles are developed using nanoporous starch aerogels in combination with supercritical carbon dioxide to improve the bioaccessibility and in turn bioavailability of phytosterols. The novel low-crystallinity phytosterol nanoparticles are 20-folds more bioaccessible compared to the crude phytosterols after simulated digestion.

KW - aerogels

KW - bioaccessibility

KW - nanoparticles

KW - phytosterols

KW - starch

KW - supercritical

UR - http://www.scopus.com/inward/record.url?scp=85059375728&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85059375728&partnerID=8YFLogxK

U2 - 10.1002/ejlt.201700229

DO - 10.1002/ejlt.201700229

M3 - Article

AN - SCOPUS:85059375728

VL - 121

JO - European Journal of Lipid Science and Technology

JF - European Journal of Lipid Science and Technology

SN - 1438-7697

IS - 1

M1 - 1700229

ER -