Enhanced pool-boiling heat transfer and critical heat flux on femtosecond laser processed stainless steel surfaces

Corey M. Kruse, Troy Anderson, Chris Wilson, Craig Zuhlke, Dennis Alexander, George Gogos, Sidy Ndao

Research output: Contribution to journalArticle

72 Citations (Scopus)

Abstract

In this paper, we present an experimental investigation of pool boiling heat transfer on multiscale (micro/nano) functionalized metallic surfaces. Heat transfer enhancement in metallic surfaces is very important for large scale high heat flux applications like in the nuclear power industry. The multiscale structures were fabricated via a femtosecond laser surface process (FLSP) technique, which forms self-organized mound-like microstructures covered by layers of nanoparticles. Using a pool boiling experimental setup with deionized water as the working fluid, both the heat transfer coefficients and critical heat flux were investigated. A polished reference sample was found to have a critical heat flux of 91 W/cm2 at 40 °C of superheat and a maximum heat transfer coefficient of 23,000 W/m2 K. The processed samples were found to have a maximum critical heat flux of 142 W/cm2 at 29 °C and a maximum heat transfer coefficient of 67,400 W/m2 K. It was found that the enhancement of the critical heat flux was directly related to the wetting and wicking ability of the surface which acts to replenish the evaporating liquid and delay critical heat flux. The heat transfer coefficients were also found to increase when the surface area ratio was increased as well as the microstructure peak-to-valley height. Enhanced nucleate boiling is the main heat transfer mechanism, and is attributed to an increase in surface area and nucleation site density.

Original languageEnglish (US)
Pages (from-to)109-116
Number of pages8
JournalInternational Journal of Heat and Mass Transfer
Volume82
DOIs
StatePublished - Feb 2015

Fingerprint

Stainless Steel
Ultrashort pulses
boiling
Boiling liquids
Heat flux
heat flux
stainless steels
Stainless steel
heat transfer
Heat transfer
heat transfer coefficients
Heat transfer coefficients
lasers
nucleate boiling
Nucleate boiling
microstructure
Microstructure
augmentation
Deionized water
working fluids

Keywords

  • Critical heat flux
  • Femtosecond laser surface processing
  • Heat transfer coefficients
  • Metallic enhanced heat transfer surfaces
  • Pool boiling

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

Cite this

Enhanced pool-boiling heat transfer and critical heat flux on femtosecond laser processed stainless steel surfaces. / Kruse, Corey M.; Anderson, Troy; Wilson, Chris; Zuhlke, Craig; Alexander, Dennis; Gogos, George; Ndao, Sidy.

In: International Journal of Heat and Mass Transfer, Vol. 82, 02.2015, p. 109-116.

Research output: Contribution to journalArticle

@article{5cc165c952444cb9860ae411e116ccbe,
title = "Enhanced pool-boiling heat transfer and critical heat flux on femtosecond laser processed stainless steel surfaces",
abstract = "In this paper, we present an experimental investigation of pool boiling heat transfer on multiscale (micro/nano) functionalized metallic surfaces. Heat transfer enhancement in metallic surfaces is very important for large scale high heat flux applications like in the nuclear power industry. The multiscale structures were fabricated via a femtosecond laser surface process (FLSP) technique, which forms self-organized mound-like microstructures covered by layers of nanoparticles. Using a pool boiling experimental setup with deionized water as the working fluid, both the heat transfer coefficients and critical heat flux were investigated. A polished reference sample was found to have a critical heat flux of 91 W/cm2 at 40 °C of superheat and a maximum heat transfer coefficient of 23,000 W/m2 K. The processed samples were found to have a maximum critical heat flux of 142 W/cm2 at 29 °C and a maximum heat transfer coefficient of 67,400 W/m2 K. It was found that the enhancement of the critical heat flux was directly related to the wetting and wicking ability of the surface which acts to replenish the evaporating liquid and delay critical heat flux. The heat transfer coefficients were also found to increase when the surface area ratio was increased as well as the microstructure peak-to-valley height. Enhanced nucleate boiling is the main heat transfer mechanism, and is attributed to an increase in surface area and nucleation site density.",
keywords = "Critical heat flux, Femtosecond laser surface processing, Heat transfer coefficients, Metallic enhanced heat transfer surfaces, Pool boiling",
author = "Kruse, {Corey M.} and Troy Anderson and Chris Wilson and Craig Zuhlke and Dennis Alexander and George Gogos and Sidy Ndao",
year = "2015",
month = "2",
doi = "10.1016/j.ijheatmasstransfer.2014.11.023",
language = "English (US)",
volume = "82",
pages = "109--116",
journal = "International Journal of Heat and Mass Transfer",
issn = "0017-9310",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Enhanced pool-boiling heat transfer and critical heat flux on femtosecond laser processed stainless steel surfaces

AU - Kruse, Corey M.

AU - Anderson, Troy

AU - Wilson, Chris

AU - Zuhlke, Craig

AU - Alexander, Dennis

AU - Gogos, George

AU - Ndao, Sidy

PY - 2015/2

Y1 - 2015/2

N2 - In this paper, we present an experimental investigation of pool boiling heat transfer on multiscale (micro/nano) functionalized metallic surfaces. Heat transfer enhancement in metallic surfaces is very important for large scale high heat flux applications like in the nuclear power industry. The multiscale structures were fabricated via a femtosecond laser surface process (FLSP) technique, which forms self-organized mound-like microstructures covered by layers of nanoparticles. Using a pool boiling experimental setup with deionized water as the working fluid, both the heat transfer coefficients and critical heat flux were investigated. A polished reference sample was found to have a critical heat flux of 91 W/cm2 at 40 °C of superheat and a maximum heat transfer coefficient of 23,000 W/m2 K. The processed samples were found to have a maximum critical heat flux of 142 W/cm2 at 29 °C and a maximum heat transfer coefficient of 67,400 W/m2 K. It was found that the enhancement of the critical heat flux was directly related to the wetting and wicking ability of the surface which acts to replenish the evaporating liquid and delay critical heat flux. The heat transfer coefficients were also found to increase when the surface area ratio was increased as well as the microstructure peak-to-valley height. Enhanced nucleate boiling is the main heat transfer mechanism, and is attributed to an increase in surface area and nucleation site density.

AB - In this paper, we present an experimental investigation of pool boiling heat transfer on multiscale (micro/nano) functionalized metallic surfaces. Heat transfer enhancement in metallic surfaces is very important for large scale high heat flux applications like in the nuclear power industry. The multiscale structures were fabricated via a femtosecond laser surface process (FLSP) technique, which forms self-organized mound-like microstructures covered by layers of nanoparticles. Using a pool boiling experimental setup with deionized water as the working fluid, both the heat transfer coefficients and critical heat flux were investigated. A polished reference sample was found to have a critical heat flux of 91 W/cm2 at 40 °C of superheat and a maximum heat transfer coefficient of 23,000 W/m2 K. The processed samples were found to have a maximum critical heat flux of 142 W/cm2 at 29 °C and a maximum heat transfer coefficient of 67,400 W/m2 K. It was found that the enhancement of the critical heat flux was directly related to the wetting and wicking ability of the surface which acts to replenish the evaporating liquid and delay critical heat flux. The heat transfer coefficients were also found to increase when the surface area ratio was increased as well as the microstructure peak-to-valley height. Enhanced nucleate boiling is the main heat transfer mechanism, and is attributed to an increase in surface area and nucleation site density.

KW - Critical heat flux

KW - Femtosecond laser surface processing

KW - Heat transfer coefficients

KW - Metallic enhanced heat transfer surfaces

KW - Pool boiling

UR - http://www.scopus.com/inward/record.url?scp=84912525400&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84912525400&partnerID=8YFLogxK

U2 - 10.1016/j.ijheatmasstransfer.2014.11.023

DO - 10.1016/j.ijheatmasstransfer.2014.11.023

M3 - Article

C2 - 30449897

AN - SCOPUS:84912525400

VL - 82

SP - 109

EP - 116

JO - International Journal of Heat and Mass Transfer

JF - International Journal of Heat and Mass Transfer

SN - 0017-9310

ER -