Electrochemical machining under orbital motion conditions

M. S. Hewidy, S. J. Ebeid, K. P. Rajurkar, M. F. El-Safti

Research output: Contribution to journalArticle

25 Citations (Scopus)

Abstract

The range of practical applications of electrochemical machining (ECM) is limited by relatively low machining accuracy, specially in cases of complicated shapes. One of the major problems is the generation of spikes which delay the accuracy of the process. The problem is strongly exaggerated if the tool includes multi-electrolyte holes. Moreover, additional machining processes will be needed to remove the resultant spikes. In the present work, tool orbital motion has been proposed as a new technique to enhance the ECM accuracy and to eliminate the presence of the spikes. A special test rig has been constructed for the orbital motion process. A theoretical model has been derived to predict the shape of the frontal zone, the effective machining time and the effective feed rate. The obtained results are an endeavor to provide the ECM tool designer with useful information to enhance the process accuracy. Furthermore, the results facilitate the utilization of the ECM process in die sinking and mold industry. The effect of the applied voltage, feed rate, and tool eccentricity on the spike formation are also presented.

Original languageEnglish (US)
Pages (from-to)339-346
Number of pages8
JournalJournal of Materials Processing Technology
Volume109
Issue number3
DOIs
StatePublished - Feb 15 2001

Fingerprint

Machining
Electrolytes
Electric potential
Industry

ASJC Scopus subject areas

  • Ceramics and Composites
  • Computer Science Applications
  • Metals and Alloys
  • Industrial and Manufacturing Engineering

Cite this

Electrochemical machining under orbital motion conditions. / Hewidy, M. S.; Ebeid, S. J.; Rajurkar, K. P.; El-Safti, M. F.

In: Journal of Materials Processing Technology, Vol. 109, No. 3, 15.02.2001, p. 339-346.

Research output: Contribution to journalArticle

Hewidy, M. S. ; Ebeid, S. J. ; Rajurkar, K. P. ; El-Safti, M. F. / Electrochemical machining under orbital motion conditions. In: Journal of Materials Processing Technology. 2001 ; Vol. 109, No. 3. pp. 339-346.
@article{649f2c943c924dd8b7f6f1ede6efe27f,
title = "Electrochemical machining under orbital motion conditions",
abstract = "The range of practical applications of electrochemical machining (ECM) is limited by relatively low machining accuracy, specially in cases of complicated shapes. One of the major problems is the generation of spikes which delay the accuracy of the process. The problem is strongly exaggerated if the tool includes multi-electrolyte holes. Moreover, additional machining processes will be needed to remove the resultant spikes. In the present work, tool orbital motion has been proposed as a new technique to enhance the ECM accuracy and to eliminate the presence of the spikes. A special test rig has been constructed for the orbital motion process. A theoretical model has been derived to predict the shape of the frontal zone, the effective machining time and the effective feed rate. The obtained results are an endeavor to provide the ECM tool designer with useful information to enhance the process accuracy. Furthermore, the results facilitate the utilization of the ECM process in die sinking and mold industry. The effect of the applied voltage, feed rate, and tool eccentricity on the spike formation are also presented.",
author = "Hewidy, {M. S.} and Ebeid, {S. J.} and Rajurkar, {K. P.} and El-Safti, {M. F.}",
year = "2001",
month = "2",
day = "15",
doi = "10.1016/S0924-0136(00)00827-X",
language = "English (US)",
volume = "109",
pages = "339--346",
journal = "Journal of Materials Processing Technology",
issn = "0924-0136",
publisher = "Elsevier BV",
number = "3",

}

TY - JOUR

T1 - Electrochemical machining under orbital motion conditions

AU - Hewidy, M. S.

AU - Ebeid, S. J.

AU - Rajurkar, K. P.

AU - El-Safti, M. F.

PY - 2001/2/15

Y1 - 2001/2/15

N2 - The range of practical applications of electrochemical machining (ECM) is limited by relatively low machining accuracy, specially in cases of complicated shapes. One of the major problems is the generation of spikes which delay the accuracy of the process. The problem is strongly exaggerated if the tool includes multi-electrolyte holes. Moreover, additional machining processes will be needed to remove the resultant spikes. In the present work, tool orbital motion has been proposed as a new technique to enhance the ECM accuracy and to eliminate the presence of the spikes. A special test rig has been constructed for the orbital motion process. A theoretical model has been derived to predict the shape of the frontal zone, the effective machining time and the effective feed rate. The obtained results are an endeavor to provide the ECM tool designer with useful information to enhance the process accuracy. Furthermore, the results facilitate the utilization of the ECM process in die sinking and mold industry. The effect of the applied voltage, feed rate, and tool eccentricity on the spike formation are also presented.

AB - The range of practical applications of electrochemical machining (ECM) is limited by relatively low machining accuracy, specially in cases of complicated shapes. One of the major problems is the generation of spikes which delay the accuracy of the process. The problem is strongly exaggerated if the tool includes multi-electrolyte holes. Moreover, additional machining processes will be needed to remove the resultant spikes. In the present work, tool orbital motion has been proposed as a new technique to enhance the ECM accuracy and to eliminate the presence of the spikes. A special test rig has been constructed for the orbital motion process. A theoretical model has been derived to predict the shape of the frontal zone, the effective machining time and the effective feed rate. The obtained results are an endeavor to provide the ECM tool designer with useful information to enhance the process accuracy. Furthermore, the results facilitate the utilization of the ECM process in die sinking and mold industry. The effect of the applied voltage, feed rate, and tool eccentricity on the spike formation are also presented.

UR - http://www.scopus.com/inward/record.url?scp=0035253964&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0035253964&partnerID=8YFLogxK

U2 - 10.1016/S0924-0136(00)00827-X

DO - 10.1016/S0924-0136(00)00827-X

M3 - Article

AN - SCOPUS:0035253964

VL - 109

SP - 339

EP - 346

JO - Journal of Materials Processing Technology

JF - Journal of Materials Processing Technology

SN - 0924-0136

IS - 3

ER -