Effect of surface condition on the bond of Basalt Fiber-Reinforcement Polymer bars in concrete

E. Henin, Raed Tawadrous, George Morcous

Research output: Contribution to journalArticle

Abstract

Basalt fiber reinforced polymer (BFRP) bars are used in reinforced concrete structures as an alternative to conventional mild steel bars due to their excellent strength and durability properties. The bond of BFRP bars with concrete is a critical design criterion for both flexural strength and crack control. In this paper, the effect of two surface conditions (primary sand coating and secondary sand coating) on the bond of BFRP bars is evaluated experimentally in three investigations: first, twelve pull-out specimens (six specimens for each surface condition) are tested to determine the bond strength; second, eleven beams (three beams with primary sand coated BFRP bars, three beams with secondary sand coated BFRP bars, three beams with bundled BFRP bars, and two beams with mild steel bars) are tested to determine the bond-dependent coefficient (kb) of different surface conditions compared to that of deformed steel bars; third, eleven beams are tested in flexure to determine the ultimate flexural strength and failure modes of beams with different surface conditions and reinforcement ratios. It was observed that the surface condition of BFRP bars has significant effect on bond strength, kb, and flexural strength. Test results are compared to those predicted using ACI 440-15 and ISIS 2007, which found to be conservative.

Original languageEnglish (US)
Pages (from-to)449-458
Number of pages10
JournalConstruction and Building Materials
Volume226
DOIs
StatePublished - Nov 30 2019

Fingerprint

Basalt
Fiber reinforced materials
Polymers
Concretes
Fibers
Sand
Bending strength
Carbon steel
basalt
Coatings
Steel
Bond strength (materials)
Concrete construction
Failure modes
Reinforced concrete
Reinforcement
Durability
Cracks

Keywords

  • Basalt fiber reinforced polymer
  • Bond strength
  • Bond-dependent coefficient
  • Concrete beams
  • Flexural strength

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Building and Construction
  • Materials Science(all)

Cite this

Effect of surface condition on the bond of Basalt Fiber-Reinforcement Polymer bars in concrete. / Henin, E.; Tawadrous, Raed; Morcous, George.

In: Construction and Building Materials, Vol. 226, 30.11.2019, p. 449-458.

Research output: Contribution to journalArticle

@article{f8bea8252eca4e7fa4204c77afd73abf,
title = "Effect of surface condition on the bond of Basalt Fiber-Reinforcement Polymer bars in concrete",
abstract = "Basalt fiber reinforced polymer (BFRP) bars are used in reinforced concrete structures as an alternative to conventional mild steel bars due to their excellent strength and durability properties. The bond of BFRP bars with concrete is a critical design criterion for both flexural strength and crack control. In this paper, the effect of two surface conditions (primary sand coating and secondary sand coating) on the bond of BFRP bars is evaluated experimentally in three investigations: first, twelve pull-out specimens (six specimens for each surface condition) are tested to determine the bond strength; second, eleven beams (three beams with primary sand coated BFRP bars, three beams with secondary sand coated BFRP bars, three beams with bundled BFRP bars, and two beams with mild steel bars) are tested to determine the bond-dependent coefficient (kb) of different surface conditions compared to that of deformed steel bars; third, eleven beams are tested in flexure to determine the ultimate flexural strength and failure modes of beams with different surface conditions and reinforcement ratios. It was observed that the surface condition of BFRP bars has significant effect on bond strength, kb, and flexural strength. Test results are compared to those predicted using ACI 440-15 and ISIS 2007, which found to be conservative.",
keywords = "Basalt fiber reinforced polymer, Bond strength, Bond-dependent coefficient, Concrete beams, Flexural strength",
author = "E. Henin and Raed Tawadrous and George Morcous",
year = "2019",
month = "11",
day = "30",
doi = "10.1016/j.conbuildmat.2019.07.160",
language = "English (US)",
volume = "226",
pages = "449--458",
journal = "Construction and Building Materials",
issn = "0950-0618",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Effect of surface condition on the bond of Basalt Fiber-Reinforcement Polymer bars in concrete

AU - Henin, E.

AU - Tawadrous, Raed

AU - Morcous, George

PY - 2019/11/30

Y1 - 2019/11/30

N2 - Basalt fiber reinforced polymer (BFRP) bars are used in reinforced concrete structures as an alternative to conventional mild steel bars due to their excellent strength and durability properties. The bond of BFRP bars with concrete is a critical design criterion for both flexural strength and crack control. In this paper, the effect of two surface conditions (primary sand coating and secondary sand coating) on the bond of BFRP bars is evaluated experimentally in three investigations: first, twelve pull-out specimens (six specimens for each surface condition) are tested to determine the bond strength; second, eleven beams (three beams with primary sand coated BFRP bars, three beams with secondary sand coated BFRP bars, three beams with bundled BFRP bars, and two beams with mild steel bars) are tested to determine the bond-dependent coefficient (kb) of different surface conditions compared to that of deformed steel bars; third, eleven beams are tested in flexure to determine the ultimate flexural strength and failure modes of beams with different surface conditions and reinforcement ratios. It was observed that the surface condition of BFRP bars has significant effect on bond strength, kb, and flexural strength. Test results are compared to those predicted using ACI 440-15 and ISIS 2007, which found to be conservative.

AB - Basalt fiber reinforced polymer (BFRP) bars are used in reinforced concrete structures as an alternative to conventional mild steel bars due to their excellent strength and durability properties. The bond of BFRP bars with concrete is a critical design criterion for both flexural strength and crack control. In this paper, the effect of two surface conditions (primary sand coating and secondary sand coating) on the bond of BFRP bars is evaluated experimentally in three investigations: first, twelve pull-out specimens (six specimens for each surface condition) are tested to determine the bond strength; second, eleven beams (three beams with primary sand coated BFRP bars, three beams with secondary sand coated BFRP bars, three beams with bundled BFRP bars, and two beams with mild steel bars) are tested to determine the bond-dependent coefficient (kb) of different surface conditions compared to that of deformed steel bars; third, eleven beams are tested in flexure to determine the ultimate flexural strength and failure modes of beams with different surface conditions and reinforcement ratios. It was observed that the surface condition of BFRP bars has significant effect on bond strength, kb, and flexural strength. Test results are compared to those predicted using ACI 440-15 and ISIS 2007, which found to be conservative.

KW - Basalt fiber reinforced polymer

KW - Bond strength

KW - Bond-dependent coefficient

KW - Concrete beams

KW - Flexural strength

UR - http://www.scopus.com/inward/record.url?scp=85069938894&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85069938894&partnerID=8YFLogxK

U2 - 10.1016/j.conbuildmat.2019.07.160

DO - 10.1016/j.conbuildmat.2019.07.160

M3 - Article

AN - SCOPUS:85069938894

VL - 226

SP - 449

EP - 458

JO - Construction and Building Materials

JF - Construction and Building Materials

SN - 0950-0618

ER -