Effect of grain size on wire electrical discharge machining of polycrystalline diamond

S. Z. Wang, K. P. Rajurkar, J. Kozak

Research output: Chapter in Book/Report/Conference proceedingChapter

1 Citation (Scopus)

Abstract

Application of ultra-hard cutting tool materials such as polycrystalline diamond (PCD) is continuously expanding. However, shaping of PCD blanks is a long, labor-intensive and costly process. Wire electrical discharge machining (WEDM) has the potential to be an effective and economical technique for the production of tools from PCD blanks. This paper reports the effect of grain size of PCD, discharge frequency and discharge energy of WEDM on machining feed rate and quality of machined surfaces of PCD blanks. Surface roughness and notch depth (which is often observed at the diamond WC interface) were measured to study the cutting edge quality of the PCD blanks.

Original languageEnglish (US)
Title of host publicationNIST Special Publication
PublisherPubl by Natl Inst of Standards & Technology
Pages535-542
Number of pages8
Edition847
StatePublished - Jun 1 1993
EventProceedings of the International Conference on Machining of Advanced Materials - Gaithersburg, MD, USA
Duration: Jul 20 1993Jul 22 1993

Other

OtherProceedings of the International Conference on Machining of Advanced Materials
CityGaithersburg, MD, USA
Period7/20/937/22/93

Fingerprint

Electric discharge machining
Diamonds
Wire
Cutting tools
Machining
Surface roughness
Personnel

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Wang, S. Z., Rajurkar, K. P., & Kozak, J. (1993). Effect of grain size on wire electrical discharge machining of polycrystalline diamond. In NIST Special Publication (847 ed., pp. 535-542). Publ by Natl Inst of Standards & Technology.

Effect of grain size on wire electrical discharge machining of polycrystalline diamond. / Wang, S. Z.; Rajurkar, K. P.; Kozak, J.

NIST Special Publication. 847. ed. Publ by Natl Inst of Standards & Technology, 1993. p. 535-542.

Research output: Chapter in Book/Report/Conference proceedingChapter

Wang, SZ, Rajurkar, KP & Kozak, J 1993, Effect of grain size on wire electrical discharge machining of polycrystalline diamond. in NIST Special Publication. 847 edn, Publ by Natl Inst of Standards & Technology, pp. 535-542, Proceedings of the International Conference on Machining of Advanced Materials, Gaithersburg, MD, USA, 7/20/93.
Wang SZ, Rajurkar KP, Kozak J. Effect of grain size on wire electrical discharge machining of polycrystalline diamond. In NIST Special Publication. 847 ed. Publ by Natl Inst of Standards & Technology. 1993. p. 535-542
Wang, S. Z. ; Rajurkar, K. P. ; Kozak, J. / Effect of grain size on wire electrical discharge machining of polycrystalline diamond. NIST Special Publication. 847. ed. Publ by Natl Inst of Standards & Technology, 1993. pp. 535-542
@inbook{1ba4a98d113f4d42ac572b1f3220f2a6,
title = "Effect of grain size on wire electrical discharge machining of polycrystalline diamond",
abstract = "Application of ultra-hard cutting tool materials such as polycrystalline diamond (PCD) is continuously expanding. However, shaping of PCD blanks is a long, labor-intensive and costly process. Wire electrical discharge machining (WEDM) has the potential to be an effective and economical technique for the production of tools from PCD blanks. This paper reports the effect of grain size of PCD, discharge frequency and discharge energy of WEDM on machining feed rate and quality of machined surfaces of PCD blanks. Surface roughness and notch depth (which is often observed at the diamond WC interface) were measured to study the cutting edge quality of the PCD blanks.",
author = "Wang, {S. Z.} and Rajurkar, {K. P.} and J. Kozak",
year = "1993",
month = "6",
day = "1",
language = "English (US)",
pages = "535--542",
booktitle = "NIST Special Publication",
publisher = "Publ by Natl Inst of Standards & Technology",
edition = "847",

}

TY - CHAP

T1 - Effect of grain size on wire electrical discharge machining of polycrystalline diamond

AU - Wang, S. Z.

AU - Rajurkar, K. P.

AU - Kozak, J.

PY - 1993/6/1

Y1 - 1993/6/1

N2 - Application of ultra-hard cutting tool materials such as polycrystalline diamond (PCD) is continuously expanding. However, shaping of PCD blanks is a long, labor-intensive and costly process. Wire electrical discharge machining (WEDM) has the potential to be an effective and economical technique for the production of tools from PCD blanks. This paper reports the effect of grain size of PCD, discharge frequency and discharge energy of WEDM on machining feed rate and quality of machined surfaces of PCD blanks. Surface roughness and notch depth (which is often observed at the diamond WC interface) were measured to study the cutting edge quality of the PCD blanks.

AB - Application of ultra-hard cutting tool materials such as polycrystalline diamond (PCD) is continuously expanding. However, shaping of PCD blanks is a long, labor-intensive and costly process. Wire electrical discharge machining (WEDM) has the potential to be an effective and economical technique for the production of tools from PCD blanks. This paper reports the effect of grain size of PCD, discharge frequency and discharge energy of WEDM on machining feed rate and quality of machined surfaces of PCD blanks. Surface roughness and notch depth (which is often observed at the diamond WC interface) were measured to study the cutting edge quality of the PCD blanks.

UR - http://www.scopus.com/inward/record.url?scp=0027610049&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027610049&partnerID=8YFLogxK

M3 - Chapter

AN - SCOPUS:0027610049

SP - 535

EP - 542

BT - NIST Special Publication

PB - Publ by Natl Inst of Standards & Technology

ER -