Crystallization behavior of amorphous FeMo alloys

J. H. Hsu, S. T. Chou, Y. D. Yao, C. L. Chien, Sy-Hwang Liou

Research output: Contribution to journalArticle

Abstract

New alloys of FexMo100-x over the whole composition range have been prepared by the sputtering method. It was found by X-ray diffraction that samples with 40≤ x ≤ 80 are amorphous, while the remaining alloys are single phase with the b.c.c. structure. In this paper, we report that a very high crystallization temperature Tcr of around 1100 K has been observed from the electrical resistivity measurements for amorphous FexMo100-x samples and that Tcr rises as the molybdenum content increases. After crystallization, the magnetic properties of these samples were studied using a vibrating-sample magnetometer. The results indicate that compositional dependence of the magnetic ordering temperatures Tc of these crystallized samples can be well described by the same equation as that for as-made crystalline samples, which is Tc(x) = 39 (x - 20)0.75 Also, further heating at high temperatures causes the segregation of α-Fe and molybdenum atoms.

Original languageEnglish (US)
Pages (from-to)265-267
Number of pages3
JournalMaterials Science and Engineering
Volume97
Issue numberC
DOIs
StatePublished - Jan 1 1988
Externally publishedYes

Fingerprint

Amorphous alloys
Crystallization
Molybdenum
Magnetometers
Temperature
Sputtering
Magnetization
Magnetic properties
Crystalline materials
Heating
X ray diffraction
Atoms
Chemical analysis

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Crystallization behavior of amorphous FeMo alloys. / Hsu, J. H.; Chou, S. T.; Yao, Y. D.; Chien, C. L.; Liou, Sy-Hwang.

In: Materials Science and Engineering, Vol. 97, No. C, 01.01.1988, p. 265-267.

Research output: Contribution to journalArticle

Hsu, J. H. ; Chou, S. T. ; Yao, Y. D. ; Chien, C. L. ; Liou, Sy-Hwang. / Crystallization behavior of amorphous FeMo alloys. In: Materials Science and Engineering. 1988 ; Vol. 97, No. C. pp. 265-267.
@article{4ab4173011c649aeba3f1a0bdb56553d,
title = "Crystallization behavior of amorphous FeMo alloys",
abstract = "New alloys of FexMo100-x over the whole composition range have been prepared by the sputtering method. It was found by X-ray diffraction that samples with 40≤ x ≤ 80 are amorphous, while the remaining alloys are single phase with the b.c.c. structure. In this paper, we report that a very high crystallization temperature Tcr of around 1100 K has been observed from the electrical resistivity measurements for amorphous FexMo100-x samples and that Tcr rises as the molybdenum content increases. After crystallization, the magnetic properties of these samples were studied using a vibrating-sample magnetometer. The results indicate that compositional dependence of the magnetic ordering temperatures Tc of these crystallized samples can be well described by the same equation as that for as-made crystalline samples, which is Tc(x) = 39 (x - 20)0.75 Also, further heating at high temperatures causes the segregation of α-Fe and molybdenum atoms.",
author = "Hsu, {J. H.} and Chou, {S. T.} and Yao, {Y. D.} and Chien, {C. L.} and Sy-Hwang Liou",
year = "1988",
month = "1",
day = "1",
doi = "10.1016/0025-5416(88)90054-7",
language = "English (US)",
volume = "97",
pages = "265--267",
journal = "Materials Science and Engineering",
issn = "0025-5416",
publisher = "Elsevier BV",
number = "C",

}

TY - JOUR

T1 - Crystallization behavior of amorphous FeMo alloys

AU - Hsu, J. H.

AU - Chou, S. T.

AU - Yao, Y. D.

AU - Chien, C. L.

AU - Liou, Sy-Hwang

PY - 1988/1/1

Y1 - 1988/1/1

N2 - New alloys of FexMo100-x over the whole composition range have been prepared by the sputtering method. It was found by X-ray diffraction that samples with 40≤ x ≤ 80 are amorphous, while the remaining alloys are single phase with the b.c.c. structure. In this paper, we report that a very high crystallization temperature Tcr of around 1100 K has been observed from the electrical resistivity measurements for amorphous FexMo100-x samples and that Tcr rises as the molybdenum content increases. After crystallization, the magnetic properties of these samples were studied using a vibrating-sample magnetometer. The results indicate that compositional dependence of the magnetic ordering temperatures Tc of these crystallized samples can be well described by the same equation as that for as-made crystalline samples, which is Tc(x) = 39 (x - 20)0.75 Also, further heating at high temperatures causes the segregation of α-Fe and molybdenum atoms.

AB - New alloys of FexMo100-x over the whole composition range have been prepared by the sputtering method. It was found by X-ray diffraction that samples with 40≤ x ≤ 80 are amorphous, while the remaining alloys are single phase with the b.c.c. structure. In this paper, we report that a very high crystallization temperature Tcr of around 1100 K has been observed from the electrical resistivity measurements for amorphous FexMo100-x samples and that Tcr rises as the molybdenum content increases. After crystallization, the magnetic properties of these samples were studied using a vibrating-sample magnetometer. The results indicate that compositional dependence of the magnetic ordering temperatures Tc of these crystallized samples can be well described by the same equation as that for as-made crystalline samples, which is Tc(x) = 39 (x - 20)0.75 Also, further heating at high temperatures causes the segregation of α-Fe and molybdenum atoms.

UR - http://www.scopus.com/inward/record.url?scp=0023671024&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0023671024&partnerID=8YFLogxK

U2 - 10.1016/0025-5416(88)90054-7

DO - 10.1016/0025-5416(88)90054-7

M3 - Article

VL - 97

SP - 265

EP - 267

JO - Materials Science and Engineering

JF - Materials Science and Engineering

SN - 0025-5416

IS - C

ER -