Creeping flow through microchannels with integrated micro-pillars

Ali Tamayol, Naga S.K. Gunda, Mohsen Akbari, Sushanta K. Mitra, Majid Bahrami

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

Pressure drop through micro-pillar-integrated mini/microchannels is studied experimentally and analytically. Following our previous studies, the low aspect ratio micropillars embedded in a microchannel are modeled as a porous medium sandwiched between channel walls. The pressure drop is expressed as a function of the salient geometrical parameters such as channel dimension, diameter and spacing between the adjacent cylinders as well as their arrangement. To verify the developed model, several silicon/glass samples with and without integrated pillars are fabricated using the deep reacting ion etching (DRIE) technique. Pressure drop measurements are performed over a range of water flow rates ranging from 0.1 ml/min to 0.5 ml/min. The proposed model is successfully verified with the present experimental data. A parametric study is performed by employing the proposed model, which shows that the flow resistance has a reverse relationship with the micro-pillar diameter and the mini/microchannel porosity. In addition, staggered arrangements have a significantly lower flow resistance than squared arrays of pillars especially in dense structures.

Original languageEnglish (US)
Title of host publicationASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012
Pages411-417
Number of pages7
DOIs
StatePublished - Dec 1 2012
EventASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels, ICNMM 2012 Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012 - Rio Grande, Puerto Rico
Duration: Jul 8 2012Jul 12 2012

Publication series

NameASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012

Other

OtherASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels, ICNMM 2012 Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012
CountryPuerto Rico
CityRio Grande
Period7/8/127/12/12

Fingerprint

Microchannels
Pressure drop
Silicon
Porous materials
Aspect ratio
Etching
Porosity
Flow rate
Ions
Glass
Water

Keywords

  • Brinkman equation
  • Microchannels
  • Porous media
  • Pressure drop

ASJC Scopus subject areas

  • Process Chemistry and Technology

Cite this

Tamayol, A., Gunda, N. S. K., Akbari, M., Mitra, S. K., & Bahrami, M. (2012). Creeping flow through microchannels with integrated micro-pillars. In ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012 (pp. 411-417). (ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012). https://doi.org/10.1115/ICNMM2012-73199

Creeping flow through microchannels with integrated micro-pillars. / Tamayol, Ali; Gunda, Naga S.K.; Akbari, Mohsen; Mitra, Sushanta K.; Bahrami, Majid.

ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012. 2012. p. 411-417 (ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tamayol, A, Gunda, NSK, Akbari, M, Mitra, SK & Bahrami, M 2012, Creeping flow through microchannels with integrated micro-pillars. in ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012. ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012, pp. 411-417, ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels, ICNMM 2012 Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012, Rio Grande, Puerto Rico, 7/8/12. https://doi.org/10.1115/ICNMM2012-73199
Tamayol A, Gunda NSK, Akbari M, Mitra SK, Bahrami M. Creeping flow through microchannels with integrated micro-pillars. In ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012. 2012. p. 411-417. (ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012). https://doi.org/10.1115/ICNMM2012-73199
Tamayol, Ali ; Gunda, Naga S.K. ; Akbari, Mohsen ; Mitra, Sushanta K. ; Bahrami, Majid. / Creeping flow through microchannels with integrated micro-pillars. ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012. 2012. pp. 411-417 (ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012).
@inproceedings{a3d385c87a7446a485be0bd6ae5751b8,
title = "Creeping flow through microchannels with integrated micro-pillars",
abstract = "Pressure drop through micro-pillar-integrated mini/microchannels is studied experimentally and analytically. Following our previous studies, the low aspect ratio micropillars embedded in a microchannel are modeled as a porous medium sandwiched between channel walls. The pressure drop is expressed as a function of the salient geometrical parameters such as channel dimension, diameter and spacing between the adjacent cylinders as well as their arrangement. To verify the developed model, several silicon/glass samples with and without integrated pillars are fabricated using the deep reacting ion etching (DRIE) technique. Pressure drop measurements are performed over a range of water flow rates ranging from 0.1 ml/min to 0.5 ml/min. The proposed model is successfully verified with the present experimental data. A parametric study is performed by employing the proposed model, which shows that the flow resistance has a reverse relationship with the micro-pillar diameter and the mini/microchannel porosity. In addition, staggered arrangements have a significantly lower flow resistance than squared arrays of pillars especially in dense structures.",
keywords = "Brinkman equation, Microchannels, Porous media, Pressure drop",
author = "Ali Tamayol and Gunda, {Naga S.K.} and Mohsen Akbari and Mitra, {Sushanta K.} and Majid Bahrami",
year = "2012",
month = "12",
day = "1",
doi = "10.1115/ICNMM2012-73199",
language = "English (US)",
isbn = "9780791844793",
series = "ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012",
pages = "411--417",
booktitle = "ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012",

}

TY - GEN

T1 - Creeping flow through microchannels with integrated micro-pillars

AU - Tamayol, Ali

AU - Gunda, Naga S.K.

AU - Akbari, Mohsen

AU - Mitra, Sushanta K.

AU - Bahrami, Majid

PY - 2012/12/1

Y1 - 2012/12/1

N2 - Pressure drop through micro-pillar-integrated mini/microchannels is studied experimentally and analytically. Following our previous studies, the low aspect ratio micropillars embedded in a microchannel are modeled as a porous medium sandwiched between channel walls. The pressure drop is expressed as a function of the salient geometrical parameters such as channel dimension, diameter and spacing between the adjacent cylinders as well as their arrangement. To verify the developed model, several silicon/glass samples with and without integrated pillars are fabricated using the deep reacting ion etching (DRIE) technique. Pressure drop measurements are performed over a range of water flow rates ranging from 0.1 ml/min to 0.5 ml/min. The proposed model is successfully verified with the present experimental data. A parametric study is performed by employing the proposed model, which shows that the flow resistance has a reverse relationship with the micro-pillar diameter and the mini/microchannel porosity. In addition, staggered arrangements have a significantly lower flow resistance than squared arrays of pillars especially in dense structures.

AB - Pressure drop through micro-pillar-integrated mini/microchannels is studied experimentally and analytically. Following our previous studies, the low aspect ratio micropillars embedded in a microchannel are modeled as a porous medium sandwiched between channel walls. The pressure drop is expressed as a function of the salient geometrical parameters such as channel dimension, diameter and spacing between the adjacent cylinders as well as their arrangement. To verify the developed model, several silicon/glass samples with and without integrated pillars are fabricated using the deep reacting ion etching (DRIE) technique. Pressure drop measurements are performed over a range of water flow rates ranging from 0.1 ml/min to 0.5 ml/min. The proposed model is successfully verified with the present experimental data. A parametric study is performed by employing the proposed model, which shows that the flow resistance has a reverse relationship with the micro-pillar diameter and the mini/microchannel porosity. In addition, staggered arrangements have a significantly lower flow resistance than squared arrays of pillars especially in dense structures.

KW - Brinkman equation

KW - Microchannels

KW - Porous media

KW - Pressure drop

UR - http://www.scopus.com/inward/record.url?scp=84882306060&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84882306060&partnerID=8YFLogxK

U2 - 10.1115/ICNMM2012-73199

DO - 10.1115/ICNMM2012-73199

M3 - Conference contribution

SN - 9780791844793

T3 - ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012

SP - 411

EP - 417

BT - ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and Minichannels Collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 Fluids Engineering Division Sum, ICNMM 2012

ER -