Crack modeling of bituminous materials using extrinsic nonlinear viscoelastic cohesive zone (NVCZ) model

Julia Amaral Rodrigues, Jamilla Emi Sudo Lutif Teixeira, Yong Rak Kim, Dallas N. Little, Flavio V. Souza

Research output: Contribution to journalArticle

Abstract

Cohesive zone modelling (CZM) has been used to model complex fracture process of various materials including bituminous materials. Among various CZM methods, this study used an extrinsic nonlinear viscoelastic cohesive zone (NVCZ) model implemented in a finite element method to efficiently predict nonlinear-inelastic fracture behavior of bituminous materials from crack nucleation, initiation, and propagation to complete failure. To examine the extrinsic NVCZ model, two fine aggregate matrix (FAM) bituminous mixtures with different fillers were evaluated experimentally and compared with the model's numerical results. Laboratory tests were performed to obtain model inputs and outputs, and a parametric analysis of the NVCZ model was conducted to investigate the influence of each model parameter in the FAM fracture process. Linear viscoelastic properties were obtained using dynamic frequency sweep tests, and NVCZ model parameters were identified using an integrated experimental-numerical calibration procedure that employed semicircular bending (SCB) tests and finite element simulations. To validate the model, the experimental and numerical simulation results of an indirect tensile (IDT) test were compared. The numerical modeling results agreed well with the laboratory testing results. The outcomes of this study suggest that the extrinsic NVCZ model can be an efficient tool to predict the highly nonlinear and viscoelastic fracture processes of binding constituents in bituminous materials.

Original languageEnglish (US)
Pages (from-to)520-529
Number of pages10
JournalConstruction and Building Materials
Volume204
DOIs
StatePublished - Apr 20 2019

Fingerprint

Bituminous materials
Cracks
Bending tests
Fillers

Keywords

  • Bituminous materials
  • Fracture
  • Modeling
  • Nonlinear viscoelastic cohesive zone

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Building and Construction
  • Materials Science(all)

Cite this

Crack modeling of bituminous materials using extrinsic nonlinear viscoelastic cohesive zone (NVCZ) model. / Rodrigues, Julia Amaral; Teixeira, Jamilla Emi Sudo Lutif; Kim, Yong Rak; Little, Dallas N.; Souza, Flavio V.

In: Construction and Building Materials, Vol. 204, 20.04.2019, p. 520-529.

Research output: Contribution to journalArticle

Rodrigues, Julia Amaral ; Teixeira, Jamilla Emi Sudo Lutif ; Kim, Yong Rak ; Little, Dallas N. ; Souza, Flavio V. / Crack modeling of bituminous materials using extrinsic nonlinear viscoelastic cohesive zone (NVCZ) model. In: Construction and Building Materials. 2019 ; Vol. 204. pp. 520-529.
@article{94c6e6b485dc4fdfb4099d77a79ab331,
title = "Crack modeling of bituminous materials using extrinsic nonlinear viscoelastic cohesive zone (NVCZ) model",
abstract = "Cohesive zone modelling (CZM) has been used to model complex fracture process of various materials including bituminous materials. Among various CZM methods, this study used an extrinsic nonlinear viscoelastic cohesive zone (NVCZ) model implemented in a finite element method to efficiently predict nonlinear-inelastic fracture behavior of bituminous materials from crack nucleation, initiation, and propagation to complete failure. To examine the extrinsic NVCZ model, two fine aggregate matrix (FAM) bituminous mixtures with different fillers were evaluated experimentally and compared with the model's numerical results. Laboratory tests were performed to obtain model inputs and outputs, and a parametric analysis of the NVCZ model was conducted to investigate the influence of each model parameter in the FAM fracture process. Linear viscoelastic properties were obtained using dynamic frequency sweep tests, and NVCZ model parameters were identified using an integrated experimental-numerical calibration procedure that employed semicircular bending (SCB) tests and finite element simulations. To validate the model, the experimental and numerical simulation results of an indirect tensile (IDT) test were compared. The numerical modeling results agreed well with the laboratory testing results. The outcomes of this study suggest that the extrinsic NVCZ model can be an efficient tool to predict the highly nonlinear and viscoelastic fracture processes of binding constituents in bituminous materials.",
keywords = "Bituminous materials, Fracture, Modeling, Nonlinear viscoelastic cohesive zone",
author = "Rodrigues, {Julia Amaral} and Teixeira, {Jamilla Emi Sudo Lutif} and Kim, {Yong Rak} and Little, {Dallas N.} and Souza, {Flavio V.}",
year = "2019",
month = "4",
day = "20",
doi = "10.1016/j.conbuildmat.2019.01.215",
language = "English (US)",
volume = "204",
pages = "520--529",
journal = "Construction and Building Materials",
issn = "0950-0618",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Crack modeling of bituminous materials using extrinsic nonlinear viscoelastic cohesive zone (NVCZ) model

AU - Rodrigues, Julia Amaral

AU - Teixeira, Jamilla Emi Sudo Lutif

AU - Kim, Yong Rak

AU - Little, Dallas N.

AU - Souza, Flavio V.

PY - 2019/4/20

Y1 - 2019/4/20

N2 - Cohesive zone modelling (CZM) has been used to model complex fracture process of various materials including bituminous materials. Among various CZM methods, this study used an extrinsic nonlinear viscoelastic cohesive zone (NVCZ) model implemented in a finite element method to efficiently predict nonlinear-inelastic fracture behavior of bituminous materials from crack nucleation, initiation, and propagation to complete failure. To examine the extrinsic NVCZ model, two fine aggregate matrix (FAM) bituminous mixtures with different fillers were evaluated experimentally and compared with the model's numerical results. Laboratory tests were performed to obtain model inputs and outputs, and a parametric analysis of the NVCZ model was conducted to investigate the influence of each model parameter in the FAM fracture process. Linear viscoelastic properties were obtained using dynamic frequency sweep tests, and NVCZ model parameters were identified using an integrated experimental-numerical calibration procedure that employed semicircular bending (SCB) tests and finite element simulations. To validate the model, the experimental and numerical simulation results of an indirect tensile (IDT) test were compared. The numerical modeling results agreed well with the laboratory testing results. The outcomes of this study suggest that the extrinsic NVCZ model can be an efficient tool to predict the highly nonlinear and viscoelastic fracture processes of binding constituents in bituminous materials.

AB - Cohesive zone modelling (CZM) has been used to model complex fracture process of various materials including bituminous materials. Among various CZM methods, this study used an extrinsic nonlinear viscoelastic cohesive zone (NVCZ) model implemented in a finite element method to efficiently predict nonlinear-inelastic fracture behavior of bituminous materials from crack nucleation, initiation, and propagation to complete failure. To examine the extrinsic NVCZ model, two fine aggregate matrix (FAM) bituminous mixtures with different fillers were evaluated experimentally and compared with the model's numerical results. Laboratory tests were performed to obtain model inputs and outputs, and a parametric analysis of the NVCZ model was conducted to investigate the influence of each model parameter in the FAM fracture process. Linear viscoelastic properties were obtained using dynamic frequency sweep tests, and NVCZ model parameters were identified using an integrated experimental-numerical calibration procedure that employed semicircular bending (SCB) tests and finite element simulations. To validate the model, the experimental and numerical simulation results of an indirect tensile (IDT) test were compared. The numerical modeling results agreed well with the laboratory testing results. The outcomes of this study suggest that the extrinsic NVCZ model can be an efficient tool to predict the highly nonlinear and viscoelastic fracture processes of binding constituents in bituminous materials.

KW - Bituminous materials

KW - Fracture

KW - Modeling

KW - Nonlinear viscoelastic cohesive zone

UR - http://www.scopus.com/inward/record.url?scp=85060983541&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85060983541&partnerID=8YFLogxK

U2 - 10.1016/j.conbuildmat.2019.01.215

DO - 10.1016/j.conbuildmat.2019.01.215

M3 - Article

AN - SCOPUS:85060983541

VL - 204

SP - 520

EP - 529

JO - Construction and Building Materials

JF - Construction and Building Materials

SN - 0950-0618

ER -