Characterization and modeling of PEEK in histories with reverse loading

Wenlong Li, George Gazonas, Eric N. Brown, Philip J. Rae, Mehrdad Negahban

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Traditional viscoelastic models for describing polymer response during large deformations are normally designed to capture the response during monotonic loading and typically have difficulty capturing the response after a reversal of the deformation process. In particular, most models pay little attention to capturing the equilibrium stress, the anisotropy developed after plastic flow in the elastic response, and the characteristics of the yield and subsequent flow after reversal of the loading. To characterize these events, the thermo-mechanical response of PEEK is studied during shear histories that have one or more points at which the strain rate is reversed. In particular, using digital image correlation (DIC) methods, the response of PEEK is captured during processes that subject the material to histories that reverse the straining direction one or more times. These studies show that the response of PEEK in monotonic loading is very different from that observed after reversing the loading, and also from that observed in further cycling. Yet, after multiple cycles of loading and reverse loading, if the loading is then continue beyond the point that loading reversal was initiated in the cycling, the response after this point returns to that of the initial monotonic loading.

Original languageEnglish (US)
Title of host publicationChallenges in Mechanics of Time Dependent Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics
PublisherSpringer New York LLC
Pages65-69
Number of pages5
Volume2
ISBN (Print)9783319633923
DOIs
StatePublished - 2018
EventAnnual Conference and Exposition on Experimental and Applied Mechanics, 2017 - Indianapolis, United States
Duration: Jun 12 2017Jun 15 2017

Other

OtherAnnual Conference and Exposition on Experimental and Applied Mechanics, 2017
CountryUnited States
CityIndianapolis
Period6/12/176/15/17

Fingerprint

Polyether ether ketones
Correlation methods
Plastic flow
Strain rate
Anisotropy
Polymers

Keywords

  • Cyclic loading
  • Plastic flow
  • Poly-ether-ether-ketone (PEEK)
  • Reverse loading
  • Shear

ASJC Scopus subject areas

  • Engineering(all)
  • Computational Mechanics
  • Mechanical Engineering

Cite this

Li, W., Gazonas, G., Brown, E. N., Rae, P. J., & Negahban, M. (2018). Characterization and modeling of PEEK in histories with reverse loading. In Challenges in Mechanics of Time Dependent Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics (Vol. 2, pp. 65-69). Springer New York LLC. https://doi.org/10.1007/978-3-319-63393-0_11

Characterization and modeling of PEEK in histories with reverse loading. / Li, Wenlong; Gazonas, George; Brown, Eric N.; Rae, Philip J.; Negahban, Mehrdad.

Challenges in Mechanics of Time Dependent Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Vol. 2 Springer New York LLC, 2018. p. 65-69.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Li, W, Gazonas, G, Brown, EN, Rae, PJ & Negahban, M 2018, Characterization and modeling of PEEK in histories with reverse loading. in Challenges in Mechanics of Time Dependent Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. vol. 2, Springer New York LLC, pp. 65-69, Annual Conference and Exposition on Experimental and Applied Mechanics, 2017, Indianapolis, United States, 6/12/17. https://doi.org/10.1007/978-3-319-63393-0_11
Li W, Gazonas G, Brown EN, Rae PJ, Negahban M. Characterization and modeling of PEEK in histories with reverse loading. In Challenges in Mechanics of Time Dependent Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Vol. 2. Springer New York LLC. 2018. p. 65-69 https://doi.org/10.1007/978-3-319-63393-0_11
Li, Wenlong ; Gazonas, George ; Brown, Eric N. ; Rae, Philip J. ; Negahban, Mehrdad. / Characterization and modeling of PEEK in histories with reverse loading. Challenges in Mechanics of Time Dependent Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. Vol. 2 Springer New York LLC, 2018. pp. 65-69
@inproceedings{419a42ba507c4e878c3d0a2c099b9cdf,
title = "Characterization and modeling of PEEK in histories with reverse loading",
abstract = "Traditional viscoelastic models for describing polymer response during large deformations are normally designed to capture the response during monotonic loading and typically have difficulty capturing the response after a reversal of the deformation process. In particular, most models pay little attention to capturing the equilibrium stress, the anisotropy developed after plastic flow in the elastic response, and the characteristics of the yield and subsequent flow after reversal of the loading. To characterize these events, the thermo-mechanical response of PEEK is studied during shear histories that have one or more points at which the strain rate is reversed. In particular, using digital image correlation (DIC) methods, the response of PEEK is captured during processes that subject the material to histories that reverse the straining direction one or more times. These studies show that the response of PEEK in monotonic loading is very different from that observed after reversing the loading, and also from that observed in further cycling. Yet, after multiple cycles of loading and reverse loading, if the loading is then continue beyond the point that loading reversal was initiated in the cycling, the response after this point returns to that of the initial monotonic loading.",
keywords = "Cyclic loading, Plastic flow, Poly-ether-ether-ketone (PEEK), Reverse loading, Shear",
author = "Wenlong Li and George Gazonas and Brown, {Eric N.} and Rae, {Philip J.} and Mehrdad Negahban",
year = "2018",
doi = "10.1007/978-3-319-63393-0_11",
language = "English (US)",
isbn = "9783319633923",
volume = "2",
pages = "65--69",
booktitle = "Challenges in Mechanics of Time Dependent Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics",
publisher = "Springer New York LLC",

}

TY - GEN

T1 - Characterization and modeling of PEEK in histories with reverse loading

AU - Li, Wenlong

AU - Gazonas, George

AU - Brown, Eric N.

AU - Rae, Philip J.

AU - Negahban, Mehrdad

PY - 2018

Y1 - 2018

N2 - Traditional viscoelastic models for describing polymer response during large deformations are normally designed to capture the response during monotonic loading and typically have difficulty capturing the response after a reversal of the deformation process. In particular, most models pay little attention to capturing the equilibrium stress, the anisotropy developed after plastic flow in the elastic response, and the characteristics of the yield and subsequent flow after reversal of the loading. To characterize these events, the thermo-mechanical response of PEEK is studied during shear histories that have one or more points at which the strain rate is reversed. In particular, using digital image correlation (DIC) methods, the response of PEEK is captured during processes that subject the material to histories that reverse the straining direction one or more times. These studies show that the response of PEEK in monotonic loading is very different from that observed after reversing the loading, and also from that observed in further cycling. Yet, after multiple cycles of loading and reverse loading, if the loading is then continue beyond the point that loading reversal was initiated in the cycling, the response after this point returns to that of the initial monotonic loading.

AB - Traditional viscoelastic models for describing polymer response during large deformations are normally designed to capture the response during monotonic loading and typically have difficulty capturing the response after a reversal of the deformation process. In particular, most models pay little attention to capturing the equilibrium stress, the anisotropy developed after plastic flow in the elastic response, and the characteristics of the yield and subsequent flow after reversal of the loading. To characterize these events, the thermo-mechanical response of PEEK is studied during shear histories that have one or more points at which the strain rate is reversed. In particular, using digital image correlation (DIC) methods, the response of PEEK is captured during processes that subject the material to histories that reverse the straining direction one or more times. These studies show that the response of PEEK in monotonic loading is very different from that observed after reversing the loading, and also from that observed in further cycling. Yet, after multiple cycles of loading and reverse loading, if the loading is then continue beyond the point that loading reversal was initiated in the cycling, the response after this point returns to that of the initial monotonic loading.

KW - Cyclic loading

KW - Plastic flow

KW - Poly-ether-ether-ketone (PEEK)

KW - Reverse loading

KW - Shear

UR - http://www.scopus.com/inward/record.url?scp=85033491980&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85033491980&partnerID=8YFLogxK

U2 - 10.1007/978-3-319-63393-0_11

DO - 10.1007/978-3-319-63393-0_11

M3 - Conference contribution

SN - 9783319633923

VL - 2

SP - 65

EP - 69

BT - Challenges in Mechanics of Time Dependent Materials - Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics

PB - Springer New York LLC

ER -