Calibration of strength design of pretensioned flexural concrete members at release

Yaohua Deng, George Morcous

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Strength design method for pretensioned flexural concrete members at prestress release was developed in 2001 as a rational alternative to the working stress design method. Load and resistance factors for the developed strength design method were selected to match those used in similar applications (e.g., tied columns) without reliability-based calibration. The purpose of this paper is to present the calibration of resistance factors for the strength design of pretensioned flexural concrete members at release to achieve a target reliability index of 3.5. Resistance models were developed to capture material, fabrication, and professional uncertainty. Statistical parameters of load and resistance were obtained from the literature. Formulae for strength design at release were developed for rectangular and flanged sections in cases when top reinforcement is needed and when top reinforcement is not necessarily needed. Reliability analysis was conducted for several rectangular and inverted-T sections and resistance factors of 0.75 and 0.70 were recommended in light of the results for 5 ksi (34.5 MPa) and 8 ksi (55.2 MPa) concrete strengths, respectively. Moreover, a simplified design procedure was proposed to assist designers and producers in applying the strength design method at prestress release. Three design examples were also presented and compared against those designed using the working stress method.

Original languageEnglish (US)
Pages (from-to)1819-1838
Number of pages20
JournalAdvances in Structural Engineering
Volume16
Issue number10
DOIs
StatePublished - Oct 1 2013

Fingerprint

Calibration
Concretes
Reinforcement
Reliability analysis
Loads (forces)
Fabrication

Keywords

  • concrete strength at release
  • prestressed concrete
  • reliability analysis
  • strength design
  • top reinforcement

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Building and Construction

Cite this

Calibration of strength design of pretensioned flexural concrete members at release. / Deng, Yaohua; Morcous, George.

In: Advances in Structural Engineering, Vol. 16, No. 10, 01.10.2013, p. 1819-1838.

Research output: Contribution to journalArticle

@article{eab64f4f8f1c4df694384a22272d6c69,
title = "Calibration of strength design of pretensioned flexural concrete members at release",
abstract = "Strength design method for pretensioned flexural concrete members at prestress release was developed in 2001 as a rational alternative to the working stress design method. Load and resistance factors for the developed strength design method were selected to match those used in similar applications (e.g., tied columns) without reliability-based calibration. The purpose of this paper is to present the calibration of resistance factors for the strength design of pretensioned flexural concrete members at release to achieve a target reliability index of 3.5. Resistance models were developed to capture material, fabrication, and professional uncertainty. Statistical parameters of load and resistance were obtained from the literature. Formulae for strength design at release were developed for rectangular and flanged sections in cases when top reinforcement is needed and when top reinforcement is not necessarily needed. Reliability analysis was conducted for several rectangular and inverted-T sections and resistance factors of 0.75 and 0.70 were recommended in light of the results for 5 ksi (34.5 MPa) and 8 ksi (55.2 MPa) concrete strengths, respectively. Moreover, a simplified design procedure was proposed to assist designers and producers in applying the strength design method at prestress release. Three design examples were also presented and compared against those designed using the working stress method.",
keywords = "concrete strength at release, prestressed concrete, reliability analysis, strength design, top reinforcement",
author = "Yaohua Deng and George Morcous",
year = "2013",
month = "10",
day = "1",
doi = "10.1260/1369-4332.16.10.1819",
language = "English (US)",
volume = "16",
pages = "1819--1838",
journal = "Advances in Structural Engineering",
issn = "1369-4332",
publisher = "Multi-Science Publishing Co. Ltd",
number = "10",

}

TY - JOUR

T1 - Calibration of strength design of pretensioned flexural concrete members at release

AU - Deng, Yaohua

AU - Morcous, George

PY - 2013/10/1

Y1 - 2013/10/1

N2 - Strength design method for pretensioned flexural concrete members at prestress release was developed in 2001 as a rational alternative to the working stress design method. Load and resistance factors for the developed strength design method were selected to match those used in similar applications (e.g., tied columns) without reliability-based calibration. The purpose of this paper is to present the calibration of resistance factors for the strength design of pretensioned flexural concrete members at release to achieve a target reliability index of 3.5. Resistance models were developed to capture material, fabrication, and professional uncertainty. Statistical parameters of load and resistance were obtained from the literature. Formulae for strength design at release were developed for rectangular and flanged sections in cases when top reinforcement is needed and when top reinforcement is not necessarily needed. Reliability analysis was conducted for several rectangular and inverted-T sections and resistance factors of 0.75 and 0.70 were recommended in light of the results for 5 ksi (34.5 MPa) and 8 ksi (55.2 MPa) concrete strengths, respectively. Moreover, a simplified design procedure was proposed to assist designers and producers in applying the strength design method at prestress release. Three design examples were also presented and compared against those designed using the working stress method.

AB - Strength design method for pretensioned flexural concrete members at prestress release was developed in 2001 as a rational alternative to the working stress design method. Load and resistance factors for the developed strength design method were selected to match those used in similar applications (e.g., tied columns) without reliability-based calibration. The purpose of this paper is to present the calibration of resistance factors for the strength design of pretensioned flexural concrete members at release to achieve a target reliability index of 3.5. Resistance models were developed to capture material, fabrication, and professional uncertainty. Statistical parameters of load and resistance were obtained from the literature. Formulae for strength design at release were developed for rectangular and flanged sections in cases when top reinforcement is needed and when top reinforcement is not necessarily needed. Reliability analysis was conducted for several rectangular and inverted-T sections and resistance factors of 0.75 and 0.70 were recommended in light of the results for 5 ksi (34.5 MPa) and 8 ksi (55.2 MPa) concrete strengths, respectively. Moreover, a simplified design procedure was proposed to assist designers and producers in applying the strength design method at prestress release. Three design examples were also presented and compared against those designed using the working stress method.

KW - concrete strength at release

KW - prestressed concrete

KW - reliability analysis

KW - strength design

KW - top reinforcement

UR - http://www.scopus.com/inward/record.url?scp=84887911956&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84887911956&partnerID=8YFLogxK

U2 - 10.1260/1369-4332.16.10.1819

DO - 10.1260/1369-4332.16.10.1819

M3 - Article

VL - 16

SP - 1819

EP - 1838

JO - Advances in Structural Engineering

JF - Advances in Structural Engineering

SN - 1369-4332

IS - 10

ER -