Calculations of thermodynamic derivative properties from the NRTL and UNIQUAC models

Y. Demirel, H. O. Paksoy

Research output: Contribution to journalArticle

9 Citations (Scopus)

Abstract

The local composition models NRTL and UNIQUAC with temperature-dependent parameters have been employed to calculate the surfaces of excess heat capacity, CEp, excess enthalpy, hE and thermodynamic factor, Γ for binary liquid mixtures. These thermodynamic properties represent the derivatives of the models with respect to temperature, CEp, hE and composition, Γ. The parameters used in evaluating CEp and hE are directly obtained from separate CEp and hE data at different isotherms. Experimental gE and hE data at more than one different isotherm are used simultaneously to estimate the parameters in the evaluation of Γ. The following mixtures are considered: methanol(1)-methyl acetate(2); 2-propanol(2)-n-heptane(2); methanol(1)-water(2); benzene(1)-n-heptane(2) and ethanol(1)-water(2). These mixtures show close deviations between experimental and calculated values obtained from both models and also include associating mixtures. Performances of the models based on different types of experimental data have been compared. The models show considerable regional discrepancies of the same thermodynamic property over the entire composition and temperature ranges for the mixtures that show small overall deviations between the calculated and experimental data.

Original languageEnglish (US)
Pages (from-to)129-136
Number of pages8
JournalThermochimica Acta
Volume303
Issue number2
DOIs
StatePublished - Oct 30 1997

Fingerprint

Thermodynamics
Derivatives
thermodynamics
Heptane
heptanes
Methanol
Isotherms
isotherms
Thermodynamic properties
methyl alcohol
thermodynamic properties
Chemical analysis
deviation
2-Propanol
Water
Propanol
Benzene
Temperature
water
Specific heat

Keywords

  • Binary liquid mixtures
  • NRTL and UNIQUAC models
  • Surfaces of derivative properties

ASJC Scopus subject areas

  • Instrumentation
  • Condensed Matter Physics
  • Physical and Theoretical Chemistry

Cite this

Calculations of thermodynamic derivative properties from the NRTL and UNIQUAC models. / Demirel, Y.; Paksoy, H. O.

In: Thermochimica Acta, Vol. 303, No. 2, 30.10.1997, p. 129-136.

Research output: Contribution to journalArticle

Demirel, Y. ; Paksoy, H. O. / Calculations of thermodynamic derivative properties from the NRTL and UNIQUAC models. In: Thermochimica Acta. 1997 ; Vol. 303, No. 2. pp. 129-136.
@article{17acc070957f453a847cd4f0d8b9c9ed,
title = "Calculations of thermodynamic derivative properties from the NRTL and UNIQUAC models",
abstract = "The local composition models NRTL and UNIQUAC with temperature-dependent parameters have been employed to calculate the surfaces of excess heat capacity, CEp, excess enthalpy, hE and thermodynamic factor, Γ for binary liquid mixtures. These thermodynamic properties represent the derivatives of the models with respect to temperature, CEp, hE and composition, Γ. The parameters used in evaluating CEp and hE are directly obtained from separate CEp and hE data at different isotherms. Experimental gE and hE data at more than one different isotherm are used simultaneously to estimate the parameters in the evaluation of Γ. The following mixtures are considered: methanol(1)-methyl acetate(2); 2-propanol(2)-n-heptane(2); methanol(1)-water(2); benzene(1)-n-heptane(2) and ethanol(1)-water(2). These mixtures show close deviations between experimental and calculated values obtained from both models and also include associating mixtures. Performances of the models based on different types of experimental data have been compared. The models show considerable regional discrepancies of the same thermodynamic property over the entire composition and temperature ranges for the mixtures that show small overall deviations between the calculated and experimental data.",
keywords = "Binary liquid mixtures, NRTL and UNIQUAC models, Surfaces of derivative properties",
author = "Y. Demirel and Paksoy, {H. O.}",
year = "1997",
month = "10",
day = "30",
doi = "10.1016/S0040-6031(97)00217-7",
language = "English (US)",
volume = "303",
pages = "129--136",
journal = "Thermochimica Acta",
issn = "0040-6031",
publisher = "Elsevier",
number = "2",

}

TY - JOUR

T1 - Calculations of thermodynamic derivative properties from the NRTL and UNIQUAC models

AU - Demirel, Y.

AU - Paksoy, H. O.

PY - 1997/10/30

Y1 - 1997/10/30

N2 - The local composition models NRTL and UNIQUAC with temperature-dependent parameters have been employed to calculate the surfaces of excess heat capacity, CEp, excess enthalpy, hE and thermodynamic factor, Γ for binary liquid mixtures. These thermodynamic properties represent the derivatives of the models with respect to temperature, CEp, hE and composition, Γ. The parameters used in evaluating CEp and hE are directly obtained from separate CEp and hE data at different isotherms. Experimental gE and hE data at more than one different isotherm are used simultaneously to estimate the parameters in the evaluation of Γ. The following mixtures are considered: methanol(1)-methyl acetate(2); 2-propanol(2)-n-heptane(2); methanol(1)-water(2); benzene(1)-n-heptane(2) and ethanol(1)-water(2). These mixtures show close deviations between experimental and calculated values obtained from both models and also include associating mixtures. Performances of the models based on different types of experimental data have been compared. The models show considerable regional discrepancies of the same thermodynamic property over the entire composition and temperature ranges for the mixtures that show small overall deviations between the calculated and experimental data.

AB - The local composition models NRTL and UNIQUAC with temperature-dependent parameters have been employed to calculate the surfaces of excess heat capacity, CEp, excess enthalpy, hE and thermodynamic factor, Γ for binary liquid mixtures. These thermodynamic properties represent the derivatives of the models with respect to temperature, CEp, hE and composition, Γ. The parameters used in evaluating CEp and hE are directly obtained from separate CEp and hE data at different isotherms. Experimental gE and hE data at more than one different isotherm are used simultaneously to estimate the parameters in the evaluation of Γ. The following mixtures are considered: methanol(1)-methyl acetate(2); 2-propanol(2)-n-heptane(2); methanol(1)-water(2); benzene(1)-n-heptane(2) and ethanol(1)-water(2). These mixtures show close deviations between experimental and calculated values obtained from both models and also include associating mixtures. Performances of the models based on different types of experimental data have been compared. The models show considerable regional discrepancies of the same thermodynamic property over the entire composition and temperature ranges for the mixtures that show small overall deviations between the calculated and experimental data.

KW - Binary liquid mixtures

KW - NRTL and UNIQUAC models

KW - Surfaces of derivative properties

UR - http://www.scopus.com/inward/record.url?scp=0000636001&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0000636001&partnerID=8YFLogxK

U2 - 10.1016/S0040-6031(97)00217-7

DO - 10.1016/S0040-6031(97)00217-7

M3 - Article

AN - SCOPUS:0000636001

VL - 303

SP - 129

EP - 136

JO - Thermochimica Acta

JF - Thermochimica Acta

SN - 0040-6031

IS - 2

ER -