Biocomposites developed using water-plasticized wheat gluten as matrix and jute fibers as reinforcement

Narendra Reddy, Yiqi Yang

Research output: Contribution to journalArticle

38 Citations (Scopus)

Abstract

Biocomposites developed from wheat gluten using water without any chemicals as plasticizer and jute fibers as reinforcement have much better flexural and tensile properties than similar polypropylene composites reinforced with jute fibers. Wheat gluten is an inexpensive and abundant co-product derived from renewable resources and is biodegradable but non-thermoplastic. Previous attempts at developing biocomposites from wheat gluten have used plasticizers such as glycerol or chemical modifications to make gluten thermoplastic. However, plasticizers have a considerably negative effect on the mechanical properties of the composites and chemical modifications make wheat gluten less biodegradable, expensive and/or environmentally unfriendly. In the research reported, we developed composites from wheat gluten using water as a plasticizer without any chemicals. Water plasticizes wheat gluten but evaporates during compression molding and therefore does not affect the mechanical properties of the composites. The effect of composite fabrication conditions on the flexural, tensile and acoustic properties was studied in comparison to polypropylene composites reinforced with jute fibers. Wheat gluten composites had flexural strength (20 MPa), tensile strength (69 MPa) and tensile modulus (7.7 GPa) values approximately twice those of polypropylene composites. Water is an effective plasticizer for wheat gluten and could be used to develop various types of inexpensive and biodegradable wheat gluten-based thermoplastics.

Original languageEnglish (US)
Pages (from-to)711-716
Number of pages6
JournalPolymer International
Volume60
Issue number4
DOIs
StatePublished - Apr 1 2011

Fingerprint

Jute fibers
Glutens
Reinforcement
Plasticizers
Water
Composite materials
Polypropylenes
Chemical modification
Tensile properties
Thermoplastics
Acoustic properties
Mechanical properties
Compression molding
Glycerol
Bending strength
Tensile strength
Elastic moduli
Fabrication

Keywords

  • Biocomposites
  • Matrix
  • Plasticizers
  • Wheat gluten

ASJC Scopus subject areas

  • Polymers and Plastics

Cite this

Biocomposites developed using water-plasticized wheat gluten as matrix and jute fibers as reinforcement. / Reddy, Narendra; Yang, Yiqi.

In: Polymer International, Vol. 60, No. 4, 01.04.2011, p. 711-716.

Research output: Contribution to journalArticle

@article{c3476b7b846c45a697c7b2b1899f26db,
title = "Biocomposites developed using water-plasticized wheat gluten as matrix and jute fibers as reinforcement",
abstract = "Biocomposites developed from wheat gluten using water without any chemicals as plasticizer and jute fibers as reinforcement have much better flexural and tensile properties than similar polypropylene composites reinforced with jute fibers. Wheat gluten is an inexpensive and abundant co-product derived from renewable resources and is biodegradable but non-thermoplastic. Previous attempts at developing biocomposites from wheat gluten have used plasticizers such as glycerol or chemical modifications to make gluten thermoplastic. However, plasticizers have a considerably negative effect on the mechanical properties of the composites and chemical modifications make wheat gluten less biodegradable, expensive and/or environmentally unfriendly. In the research reported, we developed composites from wheat gluten using water as a plasticizer without any chemicals. Water plasticizes wheat gluten but evaporates during compression molding and therefore does not affect the mechanical properties of the composites. The effect of composite fabrication conditions on the flexural, tensile and acoustic properties was studied in comparison to polypropylene composites reinforced with jute fibers. Wheat gluten composites had flexural strength (20 MPa), tensile strength (69 MPa) and tensile modulus (7.7 GPa) values approximately twice those of polypropylene composites. Water is an effective plasticizer for wheat gluten and could be used to develop various types of inexpensive and biodegradable wheat gluten-based thermoplastics.",
keywords = "Biocomposites, Matrix, Plasticizers, Wheat gluten",
author = "Narendra Reddy and Yiqi Yang",
year = "2011",
month = "4",
day = "1",
doi = "10.1002/pi.3014",
language = "English (US)",
volume = "60",
pages = "711--716",
journal = "Polymer International",
issn = "0959-8103",
publisher = "John Wiley and Sons Ltd",
number = "4",

}

TY - JOUR

T1 - Biocomposites developed using water-plasticized wheat gluten as matrix and jute fibers as reinforcement

AU - Reddy, Narendra

AU - Yang, Yiqi

PY - 2011/4/1

Y1 - 2011/4/1

N2 - Biocomposites developed from wheat gluten using water without any chemicals as plasticizer and jute fibers as reinforcement have much better flexural and tensile properties than similar polypropylene composites reinforced with jute fibers. Wheat gluten is an inexpensive and abundant co-product derived from renewable resources and is biodegradable but non-thermoplastic. Previous attempts at developing biocomposites from wheat gluten have used plasticizers such as glycerol or chemical modifications to make gluten thermoplastic. However, plasticizers have a considerably negative effect on the mechanical properties of the composites and chemical modifications make wheat gluten less biodegradable, expensive and/or environmentally unfriendly. In the research reported, we developed composites from wheat gluten using water as a plasticizer without any chemicals. Water plasticizes wheat gluten but evaporates during compression molding and therefore does not affect the mechanical properties of the composites. The effect of composite fabrication conditions on the flexural, tensile and acoustic properties was studied in comparison to polypropylene composites reinforced with jute fibers. Wheat gluten composites had flexural strength (20 MPa), tensile strength (69 MPa) and tensile modulus (7.7 GPa) values approximately twice those of polypropylene composites. Water is an effective plasticizer for wheat gluten and could be used to develop various types of inexpensive and biodegradable wheat gluten-based thermoplastics.

AB - Biocomposites developed from wheat gluten using water without any chemicals as plasticizer and jute fibers as reinforcement have much better flexural and tensile properties than similar polypropylene composites reinforced with jute fibers. Wheat gluten is an inexpensive and abundant co-product derived from renewable resources and is biodegradable but non-thermoplastic. Previous attempts at developing biocomposites from wheat gluten have used plasticizers such as glycerol or chemical modifications to make gluten thermoplastic. However, plasticizers have a considerably negative effect on the mechanical properties of the composites and chemical modifications make wheat gluten less biodegradable, expensive and/or environmentally unfriendly. In the research reported, we developed composites from wheat gluten using water as a plasticizer without any chemicals. Water plasticizes wheat gluten but evaporates during compression molding and therefore does not affect the mechanical properties of the composites. The effect of composite fabrication conditions on the flexural, tensile and acoustic properties was studied in comparison to polypropylene composites reinforced with jute fibers. Wheat gluten composites had flexural strength (20 MPa), tensile strength (69 MPa) and tensile modulus (7.7 GPa) values approximately twice those of polypropylene composites. Water is an effective plasticizer for wheat gluten and could be used to develop various types of inexpensive and biodegradable wheat gluten-based thermoplastics.

KW - Biocomposites

KW - Matrix

KW - Plasticizers

KW - Wheat gluten

UR - http://www.scopus.com/inward/record.url?scp=79952785659&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=79952785659&partnerID=8YFLogxK

U2 - 10.1002/pi.3014

DO - 10.1002/pi.3014

M3 - Article

VL - 60

SP - 711

EP - 716

JO - Polymer International

JF - Polymer International

SN - 0959-8103

IS - 4

ER -