Back stress in modeling the response of PEEK and PC

Wenlong Li, George Gazonas, Eric N. Brown, Philip J. Rae, Mehrdad Negahban

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

With the development of new methods for the characterization of equilibrium stress through cyclic loading, it is now possible to follow the evolution of back stress during the nonlinear deformation of polymers. Experiments on PEEK and PC below the glass-transition temperature indicate a back stress that may evolve with plastic deformation, and which is substantially different from that seen during the response in the rubbery range. In particular, the back stress during the response of PC shows the characteristic post-yield softening, possibly indicating that the observed post-yield softening in the response comes from the back stress. This is not seen in PEEK, which also shows no substantial post-yield softening. The equilibrium stress plays a central role in modeling both the quasi-static and dynamic response of PEEK.

Original languageEnglish (US)
Title of host publicationChallenges in Mechanics of Time Dependent Materials- Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics
EditorsJevan Furmanski, H. Jerry Qi, Alex Arzoumanidis, Alireza Amirkhizi, Meredith Silberstein, Hongbing Lu, Bonnie Antoun
PublisherSpringer New York LLC
Pages181-186
Number of pages6
ISBN (Print)9783319415420
DOIs
StatePublished - Jan 1 2017
EventAnnual Conference and Exposition on Experimental and Applied Mechanics, 2016 - Orlando, United States
Duration: Jun 6 2016Jun 9 2016

Publication series

NameConference Proceedings of the Society for Experimental Mechanics Series
Volume2
ISSN (Print)2191-5644
ISSN (Electronic)2191-5652

Other

OtherAnnual Conference and Exposition on Experimental and Applied Mechanics, 2016
CountryUnited States
CityOrlando
Period6/6/166/9/16

Fingerprint

Polyether ether ketones
Dynamic response
Plastic deformation
Polymers
Experiments

Keywords

  • Digital image correlation
  • Equilibrium stress
  • Mechanical modeling
  • Plastic flow
  • Thermal expansion

ASJC Scopus subject areas

  • Engineering(all)
  • Computational Mechanics
  • Mechanical Engineering

Cite this

Li, W., Gazonas, G., Brown, E. N., Rae, P. J., & Negahban, M. (2017). Back stress in modeling the response of PEEK and PC. In J. Furmanski, H. J. Qi, A. Arzoumanidis, A. Amirkhizi, M. Silberstein, H. Lu, & B. Antoun (Eds.), Challenges in Mechanics of Time Dependent Materials- Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics (pp. 181-186). (Conference Proceedings of the Society for Experimental Mechanics Series; Vol. 2). Springer New York LLC. https://doi.org/10.1007/978-3-319-41543-7_23

Back stress in modeling the response of PEEK and PC. / Li, Wenlong; Gazonas, George; Brown, Eric N.; Rae, Philip J.; Negahban, Mehrdad.

Challenges in Mechanics of Time Dependent Materials- Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. ed. / Jevan Furmanski; H. Jerry Qi; Alex Arzoumanidis; Alireza Amirkhizi; Meredith Silberstein; Hongbing Lu; Bonnie Antoun. Springer New York LLC, 2017. p. 181-186 (Conference Proceedings of the Society for Experimental Mechanics Series; Vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Li, W, Gazonas, G, Brown, EN, Rae, PJ & Negahban, M 2017, Back stress in modeling the response of PEEK and PC. in J Furmanski, HJ Qi, A Arzoumanidis, A Amirkhizi, M Silberstein, H Lu & B Antoun (eds), Challenges in Mechanics of Time Dependent Materials- Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Conference Proceedings of the Society for Experimental Mechanics Series, vol. 2, Springer New York LLC, pp. 181-186, Annual Conference and Exposition on Experimental and Applied Mechanics, 2016, Orlando, United States, 6/6/16. https://doi.org/10.1007/978-3-319-41543-7_23
Li W, Gazonas G, Brown EN, Rae PJ, Negahban M. Back stress in modeling the response of PEEK and PC. In Furmanski J, Qi HJ, Arzoumanidis A, Amirkhizi A, Silberstein M, Lu H, Antoun B, editors, Challenges in Mechanics of Time Dependent Materials- Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. Springer New York LLC. 2017. p. 181-186. (Conference Proceedings of the Society for Experimental Mechanics Series). https://doi.org/10.1007/978-3-319-41543-7_23
Li, Wenlong ; Gazonas, George ; Brown, Eric N. ; Rae, Philip J. ; Negahban, Mehrdad. / Back stress in modeling the response of PEEK and PC. Challenges in Mechanics of Time Dependent Materials- Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics. editor / Jevan Furmanski ; H. Jerry Qi ; Alex Arzoumanidis ; Alireza Amirkhizi ; Meredith Silberstein ; Hongbing Lu ; Bonnie Antoun. Springer New York LLC, 2017. pp. 181-186 (Conference Proceedings of the Society for Experimental Mechanics Series).
@inproceedings{bf15e4898c1d44ee93a89a152cedb7e3,
title = "Back stress in modeling the response of PEEK and PC",
abstract = "With the development of new methods for the characterization of equilibrium stress through cyclic loading, it is now possible to follow the evolution of back stress during the nonlinear deformation of polymers. Experiments on PEEK and PC below the glass-transition temperature indicate a back stress that may evolve with plastic deformation, and which is substantially different from that seen during the response in the rubbery range. In particular, the back stress during the response of PC shows the characteristic post-yield softening, possibly indicating that the observed post-yield softening in the response comes from the back stress. This is not seen in PEEK, which also shows no substantial post-yield softening. The equilibrium stress plays a central role in modeling both the quasi-static and dynamic response of PEEK.",
keywords = "Digital image correlation, Equilibrium stress, Mechanical modeling, Plastic flow, Thermal expansion",
author = "Wenlong Li and George Gazonas and Brown, {Eric N.} and Rae, {Philip J.} and Mehrdad Negahban",
year = "2017",
month = "1",
day = "1",
doi = "10.1007/978-3-319-41543-7_23",
language = "English (US)",
isbn = "9783319415420",
series = "Conference Proceedings of the Society for Experimental Mechanics Series",
publisher = "Springer New York LLC",
pages = "181--186",
editor = "Jevan Furmanski and Qi, {H. Jerry} and Alex Arzoumanidis and Alireza Amirkhizi and Meredith Silberstein and Hongbing Lu and Bonnie Antoun",
booktitle = "Challenges in Mechanics of Time Dependent Materials- Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics",

}

TY - GEN

T1 - Back stress in modeling the response of PEEK and PC

AU - Li, Wenlong

AU - Gazonas, George

AU - Brown, Eric N.

AU - Rae, Philip J.

AU - Negahban, Mehrdad

PY - 2017/1/1

Y1 - 2017/1/1

N2 - With the development of new methods for the characterization of equilibrium stress through cyclic loading, it is now possible to follow the evolution of back stress during the nonlinear deformation of polymers. Experiments on PEEK and PC below the glass-transition temperature indicate a back stress that may evolve with plastic deformation, and which is substantially different from that seen during the response in the rubbery range. In particular, the back stress during the response of PC shows the characteristic post-yield softening, possibly indicating that the observed post-yield softening in the response comes from the back stress. This is not seen in PEEK, which also shows no substantial post-yield softening. The equilibrium stress plays a central role in modeling both the quasi-static and dynamic response of PEEK.

AB - With the development of new methods for the characterization of equilibrium stress through cyclic loading, it is now possible to follow the evolution of back stress during the nonlinear deformation of polymers. Experiments on PEEK and PC below the glass-transition temperature indicate a back stress that may evolve with plastic deformation, and which is substantially different from that seen during the response in the rubbery range. In particular, the back stress during the response of PC shows the characteristic post-yield softening, possibly indicating that the observed post-yield softening in the response comes from the back stress. This is not seen in PEEK, which also shows no substantial post-yield softening. The equilibrium stress plays a central role in modeling both the quasi-static and dynamic response of PEEK.

KW - Digital image correlation

KW - Equilibrium stress

KW - Mechanical modeling

KW - Plastic flow

KW - Thermal expansion

UR - http://www.scopus.com/inward/record.url?scp=84989868414&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84989868414&partnerID=8YFLogxK

U2 - 10.1007/978-3-319-41543-7_23

DO - 10.1007/978-3-319-41543-7_23

M3 - Conference contribution

AN - SCOPUS:84989868414

SN - 9783319415420

T3 - Conference Proceedings of the Society for Experimental Mechanics Series

SP - 181

EP - 186

BT - Challenges in Mechanics of Time Dependent Materials- Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics

A2 - Furmanski, Jevan

A2 - Qi, H. Jerry

A2 - Arzoumanidis, Alex

A2 - Amirkhizi, Alireza

A2 - Silberstein, Meredith

A2 - Lu, Hongbing

A2 - Antoun, Bonnie

PB - Springer New York LLC

ER -