Assessing the effects of tool-loading formation on construction workers' postural stability

Houtan Jebelli, Kanghyeok Yang, Mohammad Mahdi Khalili, Changbum R. Ahn, Terry Stentz

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Falls are a leading cause of fatal and nonfatal injuries in construction. One of the most important steps toward preventing falls is to identify and measure the factors that can affect the construction workers' fall risk. While several intrinsic and extrinsic factors can affect workers' fall risk - such as the effects of aging workers, job site environments, walking habits, workers' experience, and workers' equipment - one unexpected factor that can increase fall risk is the incorrect use of personal protective equipment - including safety harnesses - since when these safety tools are misapplied, they cause instability in the workers' body. The objective of this study was to assess the effects of the formation of tools connected to construction workers' full body harnesses on the fall risk of construction workers. Using the time-series quantitative kinematic measures obtained from inertial measurement units (IMUs) connected to the workers' waistline, the postural stability of a group of subjects was measured by calculating the velocity of Center of Pressure (COPv) and the resultant Accelerometer (rAcc) - lower rAcc and COPv values mean lower fall risk for construction workers. The postural stability for each worker was calculated for two different postures (standing and squatting) and three different formations of the tools attached to the full-body harness. The t-tests' results in the mean values of the calculated rAcc and COPv showed significant differences in the postural stability of subjects with different formations of tools connected to the full body harness. When tools were not connected, workers had the lowest rAcc and COPv values; asymmetric loading formations' rAcc and COPv had higher values than symmetric loading formations. The higher risk caused by asymmetric connected-tools formation express the importance of tools attaching formation to construction workers' safety.

Original languageEnglish (US)
Title of host publicationConstruction Research Congress 2018
Subtitle of host publicationSafety and Disaster Management - Selected Papers from the Construction Research Congress 2018
EditorsChristofer Harper, Yongcheol Lee, Rebecca Harris, Charles Berryman, Chao Wang
PublisherAmerican Society of Civil Engineers (ASCE)
Pages292-302
Number of pages11
ISBN (Electronic)9780784481288
DOIs
StatePublished - Jan 1 2018
EventConstruction Research Congress 2018: Safety and Disaster Management, CRC 2018 - New Orleans, United States
Duration: Apr 2 2018Apr 4 2018

Publication series

NameConstruction Research Congress 2018: Safety and Disaster Management - Selected Papers from the Construction Research Congress 2018
Volume2018-April

Other

OtherConstruction Research Congress 2018: Safety and Disaster Management, CRC 2018
CountryUnited States
CityNew Orleans
Period4/2/184/4/18

Fingerprint

Accelerometers
Units of measurement
Time series
Kinematics
Aging of materials

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Building and Construction

Cite this

Jebelli, H., Yang, K., Khalili, M. M., Ahn, C. R., & Stentz, T. (2018). Assessing the effects of tool-loading formation on construction workers' postural stability. In C. Harper, Y. Lee, R. Harris, C. Berryman, & C. Wang (Eds.), Construction Research Congress 2018: Safety and Disaster Management - Selected Papers from the Construction Research Congress 2018 (pp. 292-302). (Construction Research Congress 2018: Safety and Disaster Management - Selected Papers from the Construction Research Congress 2018; Vol. 2018-April). American Society of Civil Engineers (ASCE). https://doi.org/10.1061/9780784481288.029

Assessing the effects of tool-loading formation on construction workers' postural stability. / Jebelli, Houtan; Yang, Kanghyeok; Khalili, Mohammad Mahdi; Ahn, Changbum R.; Stentz, Terry.

Construction Research Congress 2018: Safety and Disaster Management - Selected Papers from the Construction Research Congress 2018. ed. / Christofer Harper; Yongcheol Lee; Rebecca Harris; Charles Berryman; Chao Wang. American Society of Civil Engineers (ASCE), 2018. p. 292-302 (Construction Research Congress 2018: Safety and Disaster Management - Selected Papers from the Construction Research Congress 2018; Vol. 2018-April).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jebelli, H, Yang, K, Khalili, MM, Ahn, CR & Stentz, T 2018, Assessing the effects of tool-loading formation on construction workers' postural stability. in C Harper, Y Lee, R Harris, C Berryman & C Wang (eds), Construction Research Congress 2018: Safety and Disaster Management - Selected Papers from the Construction Research Congress 2018. Construction Research Congress 2018: Safety and Disaster Management - Selected Papers from the Construction Research Congress 2018, vol. 2018-April, American Society of Civil Engineers (ASCE), pp. 292-302, Construction Research Congress 2018: Safety and Disaster Management, CRC 2018, New Orleans, United States, 4/2/18. https://doi.org/10.1061/9780784481288.029
Jebelli H, Yang K, Khalili MM, Ahn CR, Stentz T. Assessing the effects of tool-loading formation on construction workers' postural stability. In Harper C, Lee Y, Harris R, Berryman C, Wang C, editors, Construction Research Congress 2018: Safety and Disaster Management - Selected Papers from the Construction Research Congress 2018. American Society of Civil Engineers (ASCE). 2018. p. 292-302. (Construction Research Congress 2018: Safety and Disaster Management - Selected Papers from the Construction Research Congress 2018). https://doi.org/10.1061/9780784481288.029
Jebelli, Houtan ; Yang, Kanghyeok ; Khalili, Mohammad Mahdi ; Ahn, Changbum R. ; Stentz, Terry. / Assessing the effects of tool-loading formation on construction workers' postural stability. Construction Research Congress 2018: Safety and Disaster Management - Selected Papers from the Construction Research Congress 2018. editor / Christofer Harper ; Yongcheol Lee ; Rebecca Harris ; Charles Berryman ; Chao Wang. American Society of Civil Engineers (ASCE), 2018. pp. 292-302 (Construction Research Congress 2018: Safety and Disaster Management - Selected Papers from the Construction Research Congress 2018).
@inproceedings{05fba24a6aca42a28b9d0a76179077b3,
title = "Assessing the effects of tool-loading formation on construction workers' postural stability",
abstract = "Falls are a leading cause of fatal and nonfatal injuries in construction. One of the most important steps toward preventing falls is to identify and measure the factors that can affect the construction workers' fall risk. While several intrinsic and extrinsic factors can affect workers' fall risk - such as the effects of aging workers, job site environments, walking habits, workers' experience, and workers' equipment - one unexpected factor that can increase fall risk is the incorrect use of personal protective equipment - including safety harnesses - since when these safety tools are misapplied, they cause instability in the workers' body. The objective of this study was to assess the effects of the formation of tools connected to construction workers' full body harnesses on the fall risk of construction workers. Using the time-series quantitative kinematic measures obtained from inertial measurement units (IMUs) connected to the workers' waistline, the postural stability of a group of subjects was measured by calculating the velocity of Center of Pressure (COPv) and the resultant Accelerometer (rAcc) - lower rAcc and COPv values mean lower fall risk for construction workers. The postural stability for each worker was calculated for two different postures (standing and squatting) and three different formations of the tools attached to the full-body harness. The t-tests' results in the mean values of the calculated rAcc and COPv showed significant differences in the postural stability of subjects with different formations of tools connected to the full body harness. When tools were not connected, workers had the lowest rAcc and COPv values; asymmetric loading formations' rAcc and COPv had higher values than symmetric loading formations. The higher risk caused by asymmetric connected-tools formation express the importance of tools attaching formation to construction workers' safety.",
author = "Houtan Jebelli and Kanghyeok Yang and Khalili, {Mohammad Mahdi} and Ahn, {Changbum R.} and Terry Stentz",
year = "2018",
month = "1",
day = "1",
doi = "10.1061/9780784481288.029",
language = "English (US)",
series = "Construction Research Congress 2018: Safety and Disaster Management - Selected Papers from the Construction Research Congress 2018",
publisher = "American Society of Civil Engineers (ASCE)",
pages = "292--302",
editor = "Christofer Harper and Yongcheol Lee and Rebecca Harris and Charles Berryman and Chao Wang",
booktitle = "Construction Research Congress 2018",

}

TY - GEN

T1 - Assessing the effects of tool-loading formation on construction workers' postural stability

AU - Jebelli, Houtan

AU - Yang, Kanghyeok

AU - Khalili, Mohammad Mahdi

AU - Ahn, Changbum R.

AU - Stentz, Terry

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Falls are a leading cause of fatal and nonfatal injuries in construction. One of the most important steps toward preventing falls is to identify and measure the factors that can affect the construction workers' fall risk. While several intrinsic and extrinsic factors can affect workers' fall risk - such as the effects of aging workers, job site environments, walking habits, workers' experience, and workers' equipment - one unexpected factor that can increase fall risk is the incorrect use of personal protective equipment - including safety harnesses - since when these safety tools are misapplied, they cause instability in the workers' body. The objective of this study was to assess the effects of the formation of tools connected to construction workers' full body harnesses on the fall risk of construction workers. Using the time-series quantitative kinematic measures obtained from inertial measurement units (IMUs) connected to the workers' waistline, the postural stability of a group of subjects was measured by calculating the velocity of Center of Pressure (COPv) and the resultant Accelerometer (rAcc) - lower rAcc and COPv values mean lower fall risk for construction workers. The postural stability for each worker was calculated for two different postures (standing and squatting) and three different formations of the tools attached to the full-body harness. The t-tests' results in the mean values of the calculated rAcc and COPv showed significant differences in the postural stability of subjects with different formations of tools connected to the full body harness. When tools were not connected, workers had the lowest rAcc and COPv values; asymmetric loading formations' rAcc and COPv had higher values than symmetric loading formations. The higher risk caused by asymmetric connected-tools formation express the importance of tools attaching formation to construction workers' safety.

AB - Falls are a leading cause of fatal and nonfatal injuries in construction. One of the most important steps toward preventing falls is to identify and measure the factors that can affect the construction workers' fall risk. While several intrinsic and extrinsic factors can affect workers' fall risk - such as the effects of aging workers, job site environments, walking habits, workers' experience, and workers' equipment - one unexpected factor that can increase fall risk is the incorrect use of personal protective equipment - including safety harnesses - since when these safety tools are misapplied, they cause instability in the workers' body. The objective of this study was to assess the effects of the formation of tools connected to construction workers' full body harnesses on the fall risk of construction workers. Using the time-series quantitative kinematic measures obtained from inertial measurement units (IMUs) connected to the workers' waistline, the postural stability of a group of subjects was measured by calculating the velocity of Center of Pressure (COPv) and the resultant Accelerometer (rAcc) - lower rAcc and COPv values mean lower fall risk for construction workers. The postural stability for each worker was calculated for two different postures (standing and squatting) and three different formations of the tools attached to the full-body harness. The t-tests' results in the mean values of the calculated rAcc and COPv showed significant differences in the postural stability of subjects with different formations of tools connected to the full body harness. When tools were not connected, workers had the lowest rAcc and COPv values; asymmetric loading formations' rAcc and COPv had higher values than symmetric loading formations. The higher risk caused by asymmetric connected-tools formation express the importance of tools attaching formation to construction workers' safety.

UR - http://www.scopus.com/inward/record.url?scp=85048616100&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85048616100&partnerID=8YFLogxK

U2 - 10.1061/9780784481288.029

DO - 10.1061/9780784481288.029

M3 - Conference contribution

AN - SCOPUS:85048616100

T3 - Construction Research Congress 2018: Safety and Disaster Management - Selected Papers from the Construction Research Congress 2018

SP - 292

EP - 302

BT - Construction Research Congress 2018

A2 - Harper, Christofer

A2 - Lee, Yongcheol

A2 - Harris, Rebecca

A2 - Berryman, Charles

A2 - Wang, Chao

PB - American Society of Civil Engineers (ASCE)

ER -