Anisotropic loss of toughness with physical aging of work toughened polycarbonate

Kyle Strabala, Shawn Meagher, Charles Landais, Laurent Delbreilh, Mehrdad Negahban, Jean Marc Saiter, Joseph Turner, Adam Ingram, Roman Golovchak

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

We have studied the response of mechanically toughened and physically aged polycarbonate primarily using Charpy impact and ultrasonic wave speed measurements. The toughening was conducted through plastic compression on as-received PC. The Charpy impact tests showed anisotropic toughening, both in the absorbed energy and in the mode of fracture. The amount of toughening with plastic compression, even though anisotropic, is centered around the response of annealed and quenched samples, which represent the response of an unaged PC. There was an anisotropic drop in the toughness of some samples with aging. The time of this drop was uncorrelated in the different directions and disappeared for the highly toughened samples. This transition was bimodal and statistically distributed between either a fully ductile or a fully brittle failure. As the samples were prepared in a manner to remove induced residual stresses, this drop in toughening may be associated with an intrinsic anisotropic thermal aging of the deformed material.

Original languageEnglish (US)
Pages (from-to)794-804
Number of pages11
JournalPolymer Engineering and Science
Volume54
Issue number4
DOIs
StatePublished - Apr 1 2014

Fingerprint

polycarbonate
Toughening
Polycarbonates
Toughness
Aging of materials
Compaction
Plastics
Thermal aging
Ultrasonic waves
Residual stresses

ASJC Scopus subject areas

  • Chemistry(all)
  • Polymers and Plastics
  • Materials Chemistry

Cite this

Strabala, K., Meagher, S., Landais, C., Delbreilh, L., Negahban, M., Saiter, J. M., ... Golovchak, R. (2014). Anisotropic loss of toughness with physical aging of work toughened polycarbonate. Polymer Engineering and Science, 54(4), 794-804. https://doi.org/10.1002/pen.23615

Anisotropic loss of toughness with physical aging of work toughened polycarbonate. / Strabala, Kyle; Meagher, Shawn; Landais, Charles; Delbreilh, Laurent; Negahban, Mehrdad; Saiter, Jean Marc; Turner, Joseph; Ingram, Adam; Golovchak, Roman.

In: Polymer Engineering and Science, Vol. 54, No. 4, 01.04.2014, p. 794-804.

Research output: Contribution to journalArticle

Strabala, K, Meagher, S, Landais, C, Delbreilh, L, Negahban, M, Saiter, JM, Turner, J, Ingram, A & Golovchak, R 2014, 'Anisotropic loss of toughness with physical aging of work toughened polycarbonate', Polymer Engineering and Science, vol. 54, no. 4, pp. 794-804. https://doi.org/10.1002/pen.23615
Strabala, Kyle ; Meagher, Shawn ; Landais, Charles ; Delbreilh, Laurent ; Negahban, Mehrdad ; Saiter, Jean Marc ; Turner, Joseph ; Ingram, Adam ; Golovchak, Roman. / Anisotropic loss of toughness with physical aging of work toughened polycarbonate. In: Polymer Engineering and Science. 2014 ; Vol. 54, No. 4. pp. 794-804.
@article{2ea0cc484d35427ca7f6223a2d475d02,
title = "Anisotropic loss of toughness with physical aging of work toughened polycarbonate",
abstract = "We have studied the response of mechanically toughened and physically aged polycarbonate primarily using Charpy impact and ultrasonic wave speed measurements. The toughening was conducted through plastic compression on as-received PC. The Charpy impact tests showed anisotropic toughening, both in the absorbed energy and in the mode of fracture. The amount of toughening with plastic compression, even though anisotropic, is centered around the response of annealed and quenched samples, which represent the response of an unaged PC. There was an anisotropic drop in the toughness of some samples with aging. The time of this drop was uncorrelated in the different directions and disappeared for the highly toughened samples. This transition was bimodal and statistically distributed between either a fully ductile or a fully brittle failure. As the samples were prepared in a manner to remove induced residual stresses, this drop in toughening may be associated with an intrinsic anisotropic thermal aging of the deformed material.",
author = "Kyle Strabala and Shawn Meagher and Charles Landais and Laurent Delbreilh and Mehrdad Negahban and Saiter, {Jean Marc} and Joseph Turner and Adam Ingram and Roman Golovchak",
year = "2014",
month = "4",
day = "1",
doi = "10.1002/pen.23615",
language = "English (US)",
volume = "54",
pages = "794--804",
journal = "Polymer Engineering and Science",
issn = "0032-3888",
publisher = "John Wiley and Sons Inc.",
number = "4",

}

TY - JOUR

T1 - Anisotropic loss of toughness with physical aging of work toughened polycarbonate

AU - Strabala, Kyle

AU - Meagher, Shawn

AU - Landais, Charles

AU - Delbreilh, Laurent

AU - Negahban, Mehrdad

AU - Saiter, Jean Marc

AU - Turner, Joseph

AU - Ingram, Adam

AU - Golovchak, Roman

PY - 2014/4/1

Y1 - 2014/4/1

N2 - We have studied the response of mechanically toughened and physically aged polycarbonate primarily using Charpy impact and ultrasonic wave speed measurements. The toughening was conducted through plastic compression on as-received PC. The Charpy impact tests showed anisotropic toughening, both in the absorbed energy and in the mode of fracture. The amount of toughening with plastic compression, even though anisotropic, is centered around the response of annealed and quenched samples, which represent the response of an unaged PC. There was an anisotropic drop in the toughness of some samples with aging. The time of this drop was uncorrelated in the different directions and disappeared for the highly toughened samples. This transition was bimodal and statistically distributed between either a fully ductile or a fully brittle failure. As the samples were prepared in a manner to remove induced residual stresses, this drop in toughening may be associated with an intrinsic anisotropic thermal aging of the deformed material.

AB - We have studied the response of mechanically toughened and physically aged polycarbonate primarily using Charpy impact and ultrasonic wave speed measurements. The toughening was conducted through plastic compression on as-received PC. The Charpy impact tests showed anisotropic toughening, both in the absorbed energy and in the mode of fracture. The amount of toughening with plastic compression, even though anisotropic, is centered around the response of annealed and quenched samples, which represent the response of an unaged PC. There was an anisotropic drop in the toughness of some samples with aging. The time of this drop was uncorrelated in the different directions and disappeared for the highly toughened samples. This transition was bimodal and statistically distributed between either a fully ductile or a fully brittle failure. As the samples were prepared in a manner to remove induced residual stresses, this drop in toughening may be associated with an intrinsic anisotropic thermal aging of the deformed material.

UR - http://www.scopus.com/inward/record.url?scp=84897598571&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84897598571&partnerID=8YFLogxK

U2 - 10.1002/pen.23615

DO - 10.1002/pen.23615

M3 - Article

AN - SCOPUS:84897598571

VL - 54

SP - 794

EP - 804

JO - Polymer Engineering and Science

JF - Polymer Engineering and Science

SN - 0032-3888

IS - 4

ER -