An SEM evaluation of the in-vitro effects of an air-abrasive system on various implant surfaces

Caren M. Barnes, Lisa S. Fleming, Leonard A. Mueninghoff

Research output: Contribution to journalArticle

Abstract

This investigation was conducted to determine the effects of an air-abrasive polishing system on various implant surfaces. Four each of the following types of implants were obtained from the manufacturer: Stryker DB (a titanium alloy implant), Denar Steri-Oss (a pure titanium implant), IMZ (pure titanium polished collar/plasma-sprayed body), and IMZ transmucosal implant extensions (highly polished pure titanium). Four samples of each type of implant material were placed in a group to be treated with an air-abrasive polishing system for 0.5, 1, 5, or 10 seconds, for a total of 16 samples. Scanning electron photomicrographs taken of each sample before and after treatment were analyzed by three examiners who were blind to the treatment conditions. They determined if the abrasion on the treated surface was greater than, equal to, or less than the pretreatment control. No perceptible difference was noted between the pretreatment and posttreatment photomicrographs regarding the surface integrity of the implant material surfaces.

Original languageEnglish (US)
Pages (from-to)1-11
Number of pages11
JournalInternational Journal of Oral and Maxillofacial Implants
Volume6
Issue number4
Publication statusPublished - Jan 1 1991

    Fingerprint

Keywords

  • Air-abrasive polishing
  • Implant surfaces
  • Plaque removal
  • Stain removal
  • Tooth surface polishing

ASJC Scopus subject areas

  • Oral Surgery

Cite this