A wearable pressure sensor based on ultra-violet/ozone microstructured carbon nanotube/polydimethylsiloxane arrays for electronic skins

Guohui Yu, Jingdong Hu, Jianping Tan, Yang Gao, Yongfeng Lu, Fuzhen Xuan

Research output: Contribution to journalArticle

24 Citations (Scopus)

Abstract

Pressure sensors with high performance (e.g., a broad pressure sensing range, high sensitivities, rapid response/relaxation speeds, temperature-stable sensing), as well as a cost-effective and highly efficient fabrication method are highly desired for electronic skins. In this research, a high-performance pressure sensor based on microstructured carbon nanotube/polydimethylsiloxane arrays was fabricated using an ultra-violet/ozone (UV/O3) microengineering technique. The UV/O3 microengineering technique is controllable, cost-effective, and highly efficient since it is conducted at room temperature in an ambient environment. The pressure sensor offers a broad pressure sensing range (7 Pa-50 kPa), a sensitivity of ∼ -0.101 0.005 kPa-1 (<1 kPa), a fast response/relaxation speed of ∼10 ms, a small dependence on temperature variation, and a good cycling stability (>5000 cycles), which is attributed to the UV/O3 engineered microstructures that amplify and transfer external applied forces and rapidly store/release the energy during the PDMS deformation. The sensors developed show the capability to detect external forces and monitor human health conditions, promising for the potential applications in electronic skin.

Original languageEnglish (US)
Article number115502
JournalNanotechnology
Volume29
Issue number11
DOIs
StatePublished - Feb 5 2018

Fingerprint

Carbon Nanotubes
Ozone
Pressure sensors
Polydimethylsiloxane
Carbon nanotubes
Skin
Costs
Health
Fabrication
Temperature
Microstructure
Sensors
Wearable sensors
baysilon

Keywords

  • electronic skin
  • human health monitoring
  • human motion detection
  • wearable pressure sensor

ASJC Scopus subject areas

  • Bioengineering
  • Chemistry(all)
  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering
  • Electrical and Electronic Engineering

Cite this

A wearable pressure sensor based on ultra-violet/ozone microstructured carbon nanotube/polydimethylsiloxane arrays for electronic skins. / Yu, Guohui; Hu, Jingdong; Tan, Jianping; Gao, Yang; Lu, Yongfeng; Xuan, Fuzhen.

In: Nanotechnology, Vol. 29, No. 11, 115502, 05.02.2018.

Research output: Contribution to journalArticle

@article{ba0a348b844343fa850be05e329f6617,
title = "A wearable pressure sensor based on ultra-violet/ozone microstructured carbon nanotube/polydimethylsiloxane arrays for electronic skins",
abstract = "Pressure sensors with high performance (e.g., a broad pressure sensing range, high sensitivities, rapid response/relaxation speeds, temperature-stable sensing), as well as a cost-effective and highly efficient fabrication method are highly desired for electronic skins. In this research, a high-performance pressure sensor based on microstructured carbon nanotube/polydimethylsiloxane arrays was fabricated using an ultra-violet/ozone (UV/O3) microengineering technique. The UV/O3 microengineering technique is controllable, cost-effective, and highly efficient since it is conducted at room temperature in an ambient environment. The pressure sensor offers a broad pressure sensing range (7 Pa-50 kPa), a sensitivity of ∼ -0.101 0.005 kPa-1 (<1 kPa), a fast response/relaxation speed of ∼10 ms, a small dependence on temperature variation, and a good cycling stability (>5000 cycles), which is attributed to the UV/O3 engineered microstructures that amplify and transfer external applied forces and rapidly store/release the energy during the PDMS deformation. The sensors developed show the capability to detect external forces and monitor human health conditions, promising for the potential applications in electronic skin.",
keywords = "electronic skin, human health monitoring, human motion detection, wearable pressure sensor",
author = "Guohui Yu and Jingdong Hu and Jianping Tan and Yang Gao and Yongfeng Lu and Fuzhen Xuan",
year = "2018",
month = "2",
day = "5",
doi = "10.1088/1361-6528/aaa855",
language = "English (US)",
volume = "29",
journal = "Nanotechnology",
issn = "0957-4484",
publisher = "IOP Publishing Ltd.",
number = "11",

}

TY - JOUR

T1 - A wearable pressure sensor based on ultra-violet/ozone microstructured carbon nanotube/polydimethylsiloxane arrays for electronic skins

AU - Yu, Guohui

AU - Hu, Jingdong

AU - Tan, Jianping

AU - Gao, Yang

AU - Lu, Yongfeng

AU - Xuan, Fuzhen

PY - 2018/2/5

Y1 - 2018/2/5

N2 - Pressure sensors with high performance (e.g., a broad pressure sensing range, high sensitivities, rapid response/relaxation speeds, temperature-stable sensing), as well as a cost-effective and highly efficient fabrication method are highly desired for electronic skins. In this research, a high-performance pressure sensor based on microstructured carbon nanotube/polydimethylsiloxane arrays was fabricated using an ultra-violet/ozone (UV/O3) microengineering technique. The UV/O3 microengineering technique is controllable, cost-effective, and highly efficient since it is conducted at room temperature in an ambient environment. The pressure sensor offers a broad pressure sensing range (7 Pa-50 kPa), a sensitivity of ∼ -0.101 0.005 kPa-1 (<1 kPa), a fast response/relaxation speed of ∼10 ms, a small dependence on temperature variation, and a good cycling stability (>5000 cycles), which is attributed to the UV/O3 engineered microstructures that amplify and transfer external applied forces and rapidly store/release the energy during the PDMS deformation. The sensors developed show the capability to detect external forces and monitor human health conditions, promising for the potential applications in electronic skin.

AB - Pressure sensors with high performance (e.g., a broad pressure sensing range, high sensitivities, rapid response/relaxation speeds, temperature-stable sensing), as well as a cost-effective and highly efficient fabrication method are highly desired for electronic skins. In this research, a high-performance pressure sensor based on microstructured carbon nanotube/polydimethylsiloxane arrays was fabricated using an ultra-violet/ozone (UV/O3) microengineering technique. The UV/O3 microengineering technique is controllable, cost-effective, and highly efficient since it is conducted at room temperature in an ambient environment. The pressure sensor offers a broad pressure sensing range (7 Pa-50 kPa), a sensitivity of ∼ -0.101 0.005 kPa-1 (<1 kPa), a fast response/relaxation speed of ∼10 ms, a small dependence on temperature variation, and a good cycling stability (>5000 cycles), which is attributed to the UV/O3 engineered microstructures that amplify and transfer external applied forces and rapidly store/release the energy during the PDMS deformation. The sensors developed show the capability to detect external forces and monitor human health conditions, promising for the potential applications in electronic skin.

KW - electronic skin

KW - human health monitoring

KW - human motion detection

KW - wearable pressure sensor

UR - http://www.scopus.com/inward/record.url?scp=85041897180&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85041897180&partnerID=8YFLogxK

U2 - 10.1088/1361-6528/aaa855

DO - 10.1088/1361-6528/aaa855

M3 - Article

VL - 29

JO - Nanotechnology

JF - Nanotechnology

SN - 0957-4484

IS - 11

M1 - 115502

ER -