A compliant straight-line shock absorption mechanism using a viscoelastic pseudo-rigid body model

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A compliant suspension linkage based on the Peaucellier mechanism is presented. The suspension uses large-deflection viscoelastic beams to achieve straight-line motion and to provide energy dissipation. Kinematics and force analysis of the linkage are presented. In preparing to simulate the system dynamics, it was noticed that no adaptation of the pseudo-rigid body model for viscoelastic beams had been previously presented. Therefore, a new general approach for modeling viscoelastic, large-deflection beams in compliant mechanisms is described within the context of the pseudo-rigid-body model. This method is applied in simulation of the Peaucellier-based compliant suspension under a variety of input conditions.

Original languageEnglish (US)
Title of host publicationASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009
Pages233-240
Number of pages8
EditionPARTS A AND B
DOIs
StatePublished - Dec 1 2009
EventASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009 - San Diego, CA, United States
Duration: Aug 30 2009Sep 2 2009

Publication series

NameProceedings of the ASME Design Engineering Technical Conference
NumberPARTS A AND B
Volume7

Conference

ConferenceASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009
CountryUnited States
CitySan Diego, CA
Period8/30/099/2/09

Fingerprint

Rigid Body
Straight Line
Shock
Large Deflection
Absorption
Compliant mechanisms
Linkage
Compliant Mechanism
Energy dissipation
Dynamical systems
Kinematics
Energy Dissipation
System Dynamics
Model
Motion
Modeling
Simulation

Keywords

  • Compliant mechanism
  • Pseudo-rigid body model
  • Straight-line mechanism
  • Viscoelastic beam

ASJC Scopus subject areas

  • Modeling and Simulation
  • Mechanical Engineering
  • Computer Science Applications
  • Computer Graphics and Computer-Aided Design

Cite this

Nelson, C. A. (2009). A compliant straight-line shock absorption mechanism using a viscoelastic pseudo-rigid body model. In ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009 (PARTS A AND B ed., pp. 233-240). (Proceedings of the ASME Design Engineering Technical Conference; Vol. 7, No. PARTS A AND B). https://doi.org/10.1115/DETC2009-86901

A compliant straight-line shock absorption mechanism using a viscoelastic pseudo-rigid body model. / Nelson, Carl A.

ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B. ed. 2009. p. 233-240 (Proceedings of the ASME Design Engineering Technical Conference; Vol. 7, No. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nelson, CA 2009, A compliant straight-line shock absorption mechanism using a viscoelastic pseudo-rigid body model. in ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B edn, Proceedings of the ASME Design Engineering Technical Conference, no. PARTS A AND B, vol. 7, pp. 233-240, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009, San Diego, CA, United States, 8/30/09. https://doi.org/10.1115/DETC2009-86901
Nelson CA. A compliant straight-line shock absorption mechanism using a viscoelastic pseudo-rigid body model. In ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B ed. 2009. p. 233-240. (Proceedings of the ASME Design Engineering Technical Conference; PARTS A AND B). https://doi.org/10.1115/DETC2009-86901
Nelson, Carl A. / A compliant straight-line shock absorption mechanism using a viscoelastic pseudo-rigid body model. ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B. ed. 2009. pp. 233-240 (Proceedings of the ASME Design Engineering Technical Conference; PARTS A AND B).
@inproceedings{16f52f1b1daa4b09b53e02223258bbcc,
title = "A compliant straight-line shock absorption mechanism using a viscoelastic pseudo-rigid body model",
abstract = "A compliant suspension linkage based on the Peaucellier mechanism is presented. The suspension uses large-deflection viscoelastic beams to achieve straight-line motion and to provide energy dissipation. Kinematics and force analysis of the linkage are presented. In preparing to simulate the system dynamics, it was noticed that no adaptation of the pseudo-rigid body model for viscoelastic beams had been previously presented. Therefore, a new general approach for modeling viscoelastic, large-deflection beams in compliant mechanisms is described within the context of the pseudo-rigid-body model. This method is applied in simulation of the Peaucellier-based compliant suspension under a variety of input conditions.",
keywords = "Compliant mechanism, Pseudo-rigid body model, Straight-line mechanism, Viscoelastic beam",
author = "Nelson, {Carl A.}",
year = "2009",
month = "12",
day = "1",
doi = "10.1115/DETC2009-86901",
language = "English (US)",
isbn = "9780791849040",
series = "Proceedings of the ASME Design Engineering Technical Conference",
number = "PARTS A AND B",
pages = "233--240",
booktitle = "ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009",
edition = "PARTS A AND B",

}

TY - GEN

T1 - A compliant straight-line shock absorption mechanism using a viscoelastic pseudo-rigid body model

AU - Nelson, Carl A.

PY - 2009/12/1

Y1 - 2009/12/1

N2 - A compliant suspension linkage based on the Peaucellier mechanism is presented. The suspension uses large-deflection viscoelastic beams to achieve straight-line motion and to provide energy dissipation. Kinematics and force analysis of the linkage are presented. In preparing to simulate the system dynamics, it was noticed that no adaptation of the pseudo-rigid body model for viscoelastic beams had been previously presented. Therefore, a new general approach for modeling viscoelastic, large-deflection beams in compliant mechanisms is described within the context of the pseudo-rigid-body model. This method is applied in simulation of the Peaucellier-based compliant suspension under a variety of input conditions.

AB - A compliant suspension linkage based on the Peaucellier mechanism is presented. The suspension uses large-deflection viscoelastic beams to achieve straight-line motion and to provide energy dissipation. Kinematics and force analysis of the linkage are presented. In preparing to simulate the system dynamics, it was noticed that no adaptation of the pseudo-rigid body model for viscoelastic beams had been previously presented. Therefore, a new general approach for modeling viscoelastic, large-deflection beams in compliant mechanisms is described within the context of the pseudo-rigid-body model. This method is applied in simulation of the Peaucellier-based compliant suspension under a variety of input conditions.

KW - Compliant mechanism

KW - Pseudo-rigid body model

KW - Straight-line mechanism

KW - Viscoelastic beam

UR - http://www.scopus.com/inward/record.url?scp=82155178502&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=82155178502&partnerID=8YFLogxK

U2 - 10.1115/DETC2009-86901

DO - 10.1115/DETC2009-86901

M3 - Conference contribution

AN - SCOPUS:82155178502

SN - 9780791849040

T3 - Proceedings of the ASME Design Engineering Technical Conference

SP - 233

EP - 240

BT - ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009

ER -