Michael P Sealy, PhD

Assistant Professor

  • 339 Citations
  • 11 h-Index
20082019
If you made any changes in Pure, your changes will be visible here soon.

Research Output 2008 2019

Article
5 Citations (Scopus)

A predictive model and validation of laser cutting of nitinol with a novel moving volumetric pulsed heat flux

Fu, C. H., Guo, Y. B. & Sealy, M. P., Dec 2014, In : Journal of Materials Processing Technology. 214, 12, p. 2926-2934 9 p.

Research output: Contribution to journalArticle

Predictive Model
Heat Affected Zone
Heat Flux
Heat flux
Laser
12 Citations (Scopus)

Austenite-martensite phase transformation of biomedical Nitinol by ball burnishing

Fu, C. H., Sealy, M. P., Guo, Y. B. & Wei, X. T., Dec 2014, In : Journal of Materials Processing Technology. 214, 12, p. 3122-3130 9 p.

Research output: Contribution to journalArticle

Burnishing
Martensite
Phase Transformation
Austenite
Ball
2 Citations (Scopus)

Benchmark Burnishing with Almen Strip for Surface Integrity

Liu, Z. Y., Fu, C. H., Sealy, M. P., Zhao, Y. & Guo, Y. B., Jan 1 2017, In : Procedia Manufacturing. 10, p. 456-466 11 p.

Research output: Contribution to journalArticle

Burnishing
Residual stresses
Compressive stress
Shot peening
Corrosion resistance
14 Citations (Scopus)

Energy based process signature for surface integrity in hard milling

Sealy, M. P., Liu, Z. Y., Guo, Y. B. & Liu, Z. Q., Dec 1 2016, In : Journal of Materials Processing Technology. 238, p. 284-289 6 p.

Research output: Contribution to journalArticle

Milling (machining)
Integrity
Signature
Energy Consumption
Energy utilization
22 Citations (Scopus)

Energy consumption and modeling in precision hard milling

Sealy, M. P., Liu, Z. Y., Zhang, D., Guo, Y. B. & Liu, Z. Q., Nov 1 2016, In : Journal of Cleaner Production. 135, p. 1591-1601 11 p.

Research output: Contribution to journalArticle

Milling (machining)
Energy utilization
modeling
energy
Wear of materials
42 Citations (Scopus)

Energy consumption and process sustainability of hard milling with tool wear progression

Liu, Z. Y., Guo, Y. B., Sealy, M. P. & Liu, Z. Q., Mar 1 2016, In : Journal of Materials Processing Technology. 229, p. 305-312 8 p.

Research output: Contribution to journalArticle

Tool Wear
Sustainability
Progression
Energy Consumption
Sustainable development

Energy consumption characteristics in finish hard milling

Liu, Z. Y., Sealy, M. P., Li, W., Zhang, D., Fang, X. Y., Guo, Y. B. & Liu, Z. Q., Oct 2018, In : Journal of Manufacturing Processes. 35, p. 500-507 8 p.

Research output: Contribution to journalArticle

Energy utilization
Machine tools
Gas emissions
Greenhouse gases
Electric power utilization
10 Citations (Scopus)
Shot peening
Orthopedics
Magnesium
Calcium
Bone
8 Citations (Scopus)
Shot peening
Finite Element Simulation
Shock
Fabrication
Tribology
4 Citations (Scopus)
Shot peening
Fabrication
Lasers
Friction
Wear of materials
29 Citations (Scopus)

Fatigue performance of biodegradable magnesium-calcium alloy processed by laser shock peening for orthopedic implants

Sealy, M. P., Guo, Y. B., Caslaru, R. C., Sharkins, J. & Feldman, D., Jan 2016, In : International Journal of Fatigue. 82, p. 428-436 9 p.

Research output: Contribution to journalArticle

Calcium alloys
Shot peening
Implant
Magnesium
Orthopedics
12 Citations (Scopus)

Finite element simulation and experimental validation of pulsed laser cutting of nitinol

Fu, C. H., Sealy, M. P., Guo, Y. B. & Wei, X. T., Jan 1 2015, In : Journal of Manufacturing Processes. 19, p. 81-86 6 p.

Research output: Contribution to journalArticle

Pulsed lasers
Heat affected zone
Subroutines
Lasers
Stents

Glocal integrity in 420 stainless steel by asynchronous laser processing

Sealy, M. P., Hadidi, H., Kanger, C. J., Yan, X. L., Cui, B. & McGeough, J. A., 2019, In : CIRP Annals. 68, 1, p. 189-192 4 p.

Research output: Contribution to journalArticle

Shot peening
3D printers
Stainless steel
Lasers
Printing
2 Citations (Scopus)

Mechanical characterizations of 3D-printed PLLA/steel particle composites

Mozafari, H., Dong, P., Hadidi, H., Sealy, M. P. & Gu, L., Jan 1 2018, In : Materials. 12, 1, 1.

Research output: Contribution to journalArticle

Open Access
Steel
Lactic acid
Elastic moduli
Composite materials
Volume fraction
1 Citation (Scopus)

Prediction and analysis of residual stress and deflections of Almen strip by burnishing

Liu, Z. Y., Fu, C. H., Sealy, M. P. & Guo, Y. B., Jun 1 2017, In : Production Engineering. 11, 3, p. 265-274 10 p.

Research output: Contribution to journalArticle

Burnishing
Residual stresses
Shot peening
Compressive stress
Corrosion resistance
43 Citations (Scopus)

Significant improvement of corrosion resistance of biodegradable metallic implants processed by laser shock peening

Guo, Y., Sealy, M. P. & Guo, C., Apr 24 2012, In : CIRP Annals - Manufacturing Technology. 61, 1, p. 583-586 4 p.

Research output: Contribution to journalArticle

Shot peening
Calcium alloys
Corrosion resistance
Body fluids
Magnesium alloys
3 Citations (Scopus)

Stochastic modeling and analysis of spindle power during hard milling with a focus on tool wear

Wang, X., Williams, R. E., Sealy, M. P., Rao, P. K. & Guo, Y., Nov 1 2018, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 140, 11, 111011.

Research output: Contribution to journalArticle

Wear of materials
Sustainable development
Machining
Monitoring
Analysis of variance (ANOVA)
57 Citations (Scopus)
Calcium alloys
Shot peening
Magnesium alloys
Mechanics
Lasers
Chapter
2 Citations (Scopus)

Applications of laser-based additive manufacturing

Khoda, B., Benny, T., Rao, P. K., Sealy, M. P. & Zhou, C., Aug 9 2017, Laser-Based Additive Manufacturing of Metal Parts: Modeling, Optimization, and Control of Mechanical Properties. Taylor and Francis, p. 239-284 46 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

3D printers
Lasers
Manufacturing
Laser
Conference article
4 Citations (Scopus)

Energy Consumption Characteristics in Finish Hard Milling of Tool Steels

Liu, Z. Y., Sealy, M. P., Guo, Y. B. & Liu, Z. Q., Jan 1 2015, In : Procedia Manufacturing. 1, p. 477-486 10 p.

Research output: Contribution to journalConference article

Tool steel
Energy utilization
Machine tools
Greenhouses
Electric power utilization
7 Citations (Scopus)

Finite Element Analysis of Machining Damage in Single-Grit Grinding of Ceramic Knee Implants

Sun, D. W., Sealy, M. P., Liu, Z. Y., Fu, C. H., Guo, Y. B., Fang, F. Z. & Zhang, B., Jan 1 2015, In : Procedia Manufacturing. 1, p. 644-654 11 p.

Research output: Contribution to journalConference article

Machining
Alumina
Microcracks
Finite element method
Constitutive models

Low velocity impact of ABS after shot peening predefined layers during additive manufacturing

Hadidi, H., Mailand, B., Sundermann, T., Johnson, E., Madireddy, G., Negahban, M., Delbreilh, L. & Sealy, M., Jan 1 2019, In : Procedia Manufacturing. 34, p. 594-602 9 p.

Research output: Contribution to journalConference article

Open Access
3D printers
Shot peening
Butadiene
Styrene
Impact strength
7 Citations (Scopus)

Pulsed Laser Cutting of Magnesium-Calcium for Biodegradable Stents

Sealy, M. P., Guo, Y. B., Liu, J. F. & Li, C., Jan 1 2016, In : Procedia CIRP. 42, p. 67-72 6 p.

Research output: Contribution to journalConference article

Stents
Pulsed lasers
Magnesium
Calcium
Lasers
Conference contribution
1 Citation (Scopus)

A review of additive manufacturing of magnesium alloys

Jahangir, M. N., Mamun, M. A. H. & Sealy, M. P., Jul 13 2018, International Conference on Mechanical Engineering: Proceedings of the 12th International Conference on Mechanical Engineering, ICME 2017. Al Nur, M., Ali, M. & Ahmed, S. R. (eds.). American Institute of Physics Inc., 030026. (AIP Conference Proceedings; vol. 1980).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

magnesium alloys
manufacturing
orthopedics
sectors
magnesium

Characterization and modification of surface topography by sequential laser peening biodegradable magnesium-calcium alloy

Sealy, M. P., Guo, A. & Guo, Y. B., Dec 1 2010, ASME 2010 5th Frontiers in Biomedical Devices Conference and Exhibition, BIOMED 2010. p. 99-100 2 p. (ASME 2010 5th Frontiers in Biomedical Devices Conference and Exhibition, BIOMED 2010).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Calcium alloys
Shot peening
Surface topography
Magnesium alloys
Lasers
25 Citations (Scopus)

Fabrication and characterization of micro dent array produced by laser shock peening on aluminum surfaces

Caslaru, R., Sealy, M. P., Guo, Y. B. & Chen, S. C., Nov 23 2009, Transactions of the North American Manufacturing Research Institution of SME - 37th Annual North American Manufacturing Research Conference, NAMRC 37. p. 159-166 8 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 37).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shot peening
Aluminum
Fabrication
Lasers
Micromachining

Fabrication and characterization of micro dent arrays by laser shock peening on Ti-6AL-4V surfaces

Caslaru, R., Guo, Y. B. & Sealy, M. P., Dec 1 2009, Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009. p. 841-844 4 p. (Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shot peening
Fabrication
Lasers
Residual stresses
Micromachining

Fabrication and finite element analysis of micro dents using μ-laser shock peening

Sealy, M. P., Guo, Y. B. & Horstemeyer, M. F., Dec 1 2009, Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008. p. 237-244 8 p. (Proceedings of the ASME International Manufacturing Science and Engineering Conference, MSEC2008; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shot peening
Finite element method
Fabrication
Lasers
Laser pulses

Fabrication and finite element simulation of sequential laser shock peening of biodegradable Mg-Ca implants

Sealy, M. P., Guo, Y. B., Salahshoor, M. & Caslaru, R., Dec 1 2009, Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009. p. 1-8 8 p. (Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shot peening
Magnesium
Fabrication
Lasers
Residual stresses

Laser direct-write micro dents using laser shock peening: Experimental study and numerical simulations

Sealy, M. P., Guo, Y. B., Dumitrescu, C., Puzinauskas, P. V. & Chen, S. C., Dec 1 2008, 2008 Proceedings of the ASME - 2nd International Conference on Integration and Commercialization of Micro and Nanosystems, MicroNano 2008. p. 635-639 5 p. (2008 Proceedings of the ASME - 2nd International Conference on Integration and Commercialization of Micro and Nanosystems, MicroNano 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shot peening
Shock
Lasers
Computer simulation
Lubricants

Real-time monitoring and prognosis of energy consumption in hard milling

Liu, Z. Y., Sealy, M. P., Guo, Y. B. & Liu, Z. Q., Dec 16 2016, International Symposium on Flexible Automation, ISFA 2016. Institute of Electrical and Electronics Engineers Inc., p. 422-427 6 p. 7790200. (International Symposium on Flexible Automation, ISFA 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Milling (machining)
Energy utilization
Monitoring
Wear of materials
Energy efficiency
1 Citation (Scopus)

Stochastic modeling and analysis of spindle energy consumption during hard milling with a focus on tool wear

Wang, X., Williams, R. E., Sealy, M. P., Rao, P. & Guo, Y., Jan 1 2018, Manufacturing Equipment and Systems. American Society of Mechanical Engineers (ASME), (ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Energy utilization
Wear of materials
Monitoring
Analysis of variance (ANOVA)
Sustainable development
Review article

A review of computational modeling in powder-based additive manufacturing for metallic part qualification

Liu, J., Jalalahmadi, B., Guo, Y. B., Sealy, M. P. & Bolander, N., Nov 12 2018, In : Rapid Prototyping Journal. 24, 8, p. 1245-1264 20 p.

Research output: Contribution to journalReview article

3D printers
Powders
Rapid prototyping
Product development
Residual stresses
12 Citations (Scopus)

Hybrid processes in additive manufacturing

Sealy, M. P., Madireddy, G., Williams, R. E., Rao, P. & Toursangsaraki, M., Jun 1 2018, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 140, 6, 060801.

Research output: Contribution to journalReview article

3D printers
Processing
Remelting
Shot peening
14 Citations (Scopus)

State-Of-Art, Challenges, and Outlook on Manufacturing of Cooling Holes for Turbine Blades

Li, Z. Y., Wei, X. T., Guo, Y. B. & Sealy, M. P., Jul 3 2015, In : Machining Science and Technology. 19, 3, p. 361-399 39 p.

Research output: Contribution to journalReview article

Turbomachine blades
Drilling
Turbines
Cooling
Machining