Mechanical & Materials Engineering

Research Output 1977 2020

Filter
Conference article

`One-point' calibration of a glue-on polymer shear stress sensor

Park, C. H. & Cole, K. D., Dec 1 1996, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Glues
Shear stress
Calibration
Sensors
Polymers
7 Citations (Scopus)

A comparative study of the dry and wet nano-scale electro-machining

Jahan, M. P., Virwani, K. R., Rajurkar, K. P. & Malshe, A. P., Jan 1 2013, In : Procedia CIRP. 6, p. 626-631 6 p.

Research output: Contribution to journalConference article

Open Access
Machining
Dielectric liquids
Field emission
Evaporation
Microscopes
5 Citations (Scopus)

A Comparative Study on Machining Capabilities of Wet and Dry Nano-scale Electro-machining

Jahan, M. P., Rajurkar, K. P. & Malshe, A. P., Jan 1 2016, In : Procedia CIRP. 42, p. 155-160 6 p.

Research output: Contribution to journalConference article

Open Access
Machining
Evaporation
Fabrication
Graphene
Ionization

Analysis of Behavior Based Control for Planetary Cliff Descent Using Cooperative Robots

Mumm, E., Farritor, S., Huntsberger, T. & Schenker, P., Dec 1 2003, In : Proceedings of SPIE - The International Society for Optical Engineering. 5083, p. 265-276 12 p.

Research output: Contribution to journalConference article

cliffs
descent
Descent
robots
Robot
14 Citations (Scopus)

Analysis of thickness vibrations of C-axis inclined aluminum-nitrogen thin film resonators

Zhang, H., Turner, J. A. & Kosinski, J. A., Dec 1 2009, In : Integrated Ferroelectrics. 113, 1, p. 95-108 14 p.

Research output: Contribution to journalConference article

Aluminum
Resonators
Acoustic impedance
Nitrogen
resonators

An ergonomic evaluation of conventional roll and pre-cut commercial tapes

Tarawneh, I. S., Liu, D., Liew, W. C. & Bishu, R. R., Dec 1 2001, In : Proceedings of the Human Factors and Ergonomics Society. p. 717-721 5 p.

Research output: Contribution to journalConference article

Ergonomics
Tapes
ergonomics
evaluation
recording

A new multicomponent diffusion formulation for the finite-volume method

Pope, D. N. & Gogos, G., Jan 1 2004, In : American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. 375, 1, p. 87-93 7 p., IMECE2004-59551.

Research output: Contribution to journalConference article

Thermal diffusion
Finite volume method
Drag coefficient
Evaporation
Forced convection

A rule induction algorithm for continuous data using analysis of variance

Konda, R. & Rajurkar, K. P., Nov 9 2005, In : Conference Proceedings - IEEE SOUTHEASTCON. p. 489-494 6 p.

Research output: Contribution to journalConference article

Analysis of variance (ANOVA)
Decision trees
Knowledge acquisition
Decision support systems
Atomic Force Microscopy
Young's Modulus
Atomic force microscopy
modulus of elasticity
Microscopes

Cognitive engineering. Directions for future research

Bishu, R. R. & Carpenter, R. A., Dec 1 1990, In : Proceedings of the Human Factors Society. 1 p.

Research output: Contribution to journalConference article

Cognitive factors in user classification

Bishu, R. R., Dec 1 1990, In : Proceedings of the Human Factors Society. 1 p.

Research output: Contribution to journalConference article

19 Citations (Scopus)

Compensating asymmetric hysteresis for nanorobot motion control

Sun, Z., Song, B., Xi, N., Yang, R., Hao, L. & Chen, L., Jun 29 2015, In : Proceedings - IEEE International Conference on Robotics and Automation. 2015-June, June, p. 3501-3506 6 p., 7139683.

Research output: Contribution to journalConference article

Nanorobots
Motion control
Hysteresis
Atomic force microscopy
Intelligent materials

CONJUGATED HEAT TRANSFER FROM A HOT-FILM PROBE FOR TRANSIENT AIR FLOW.

Cole, K. D. & Beck, J. V., Jan 1 1987, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Laminar flow
Heat transfer
Steady flow
Unsteady flow
Air
1 Citation (Scopus)

CONJUGATED HEAT TRANSFER FROM A STRIP HEATER WITH THE UNSTEADY SURFACE ELEMENT METHOD.

Cole, K. D. & Beck, J. V., Jan 1 1986, In : AIAA Paper.

Research output: Contribution to journalConference article

Anemometers
Nusselt number
Fluxes
Heat transfer
Geometry
32 Citations (Scopus)

Continuous carbon nanofibers for nanofiber composites

Dzenis, Y. & Wen, Y., Jan 1 2002, In : Materials Research Society Symposium - Proceedings. 702, p. 173-178 6 p.

Research output: Contribution to journalConference article

Carbon nanofibers
Nanofibers
composite materials
carbon
Composite materials

Crack depth determination in concrete by ultrasound diffusion

Ramamoorthy, S. K., Kane, Y. & Turner, J. A., Nov 26 2003, In : Proceedings of SPIE - The International Society for Optical Engineering. 5057, p. 551-558 8 p.

Research output: Contribution to journalConference article

Ultrasound
Crack
cracks
Ultrasonics
Concretes

CRATER GEOMETRY AND VOLUME FROM ELECTRO-DISCHARGE MACHINED SURFACE PROFILES BY DATA DEPENDENT SYSTEMS.

Pandit, S. M. & Rajurkar, K. P., Jan 1 1979, In : American Society of Mechanical Engineers (Paper). 79 -WA/PROD-17

Research output: Contribution to journalConference article

Surface discharges
Geometry
Surface measurement
Impulse response
Machining
1 Citation (Scopus)

Design Improvements through User Testing

Tan, W. S., Liu, D., Bishu, R. R., Muralidhar, A. & Meyer, J., Dec 1 2001, In : Proceedings of the Human Factors and Ergonomics Society. p. 1181-1185 5 p.

Research output: Contribution to journalConference article

Websites
website
Testing
evaluation
rating

Design rules for additive manufacturing – Understanding the fundamental thermal phenomena to reduce scrap

Yavari, M. R., Cole, K. D. & Rao, P. K., Jan 1 2019, In : Procedia Manufacturing. 33, p. 375-382 8 p.

Research output: Contribution to journalConference article

Open Access
3D printers
Heat flux
Metals
Geometry
Supercomputers

Diffuse ultrasonics for inspection of concrete

Turner, J. A., Jan 1 2001, In : Proceedings of SPIE - The International Society for Optical Engineering. 4337, p. 95-104 10 p.

Research output: Contribution to journalConference article

Inspection
inspection
ultrasonics
Ultrasonics
Concretes
3 Citations (Scopus)

Driving habits of the elderly. A survey

Bishu, R. R., Foster, B. & McCoy, P. T., Jan 1 1991, In : Proceedings of the Human Factors Society. 2, p. 1134-1138 5 p.

Research output: Contribution to journalConference article

Traffic signals
Parking
10 Citations (Scopus)

Dynamic bearing testing aimed at identifying the root cause of warm bearing temperature trending

Tarawneh, C. M., Wilson, B. M., Cole, K. D., Fuentes, A. A. & Cardenas, M., Sep 21 2009, In : American Society of Mechanical Engineers, Rail Transportation Division (Publication) RTD. p. 199-212 14 p.

Research output: Contribution to journalConference article

Bearings (structural)
Testing
Temperature
Railroads
Time delay
3 Citations (Scopus)

Dynamic model for material removal in ultrasonic machining

Wang, Z. Y. & Rajurkar, K. P., Jan 1 1995, In : American Society of Mechanical Engineers, Applied Mechanics Division, AMD. 208, p. 115-125 11 p.

Research output: Contribution to journalConference article

Abrasives
Dynamic models
Machining
Ultrasonics
Probability distributions

Effect of task difficulty on fault diagnosis strategy

Chin, A. & Bishu, R. R., Dec 1 1994, In : Proceedings of the Human Factors and Ergonomics Society. 2

Research output: Contribution to journalConference article

Failure analysis
performance
12 Citations (Scopus)

Effects of extra vehicular activity (EVA) gloves on dexterity and tactility

Bishu, R. R., Klute, G. & Kim, B., Dec 1 1993, In : Proceedings of the Human Factors and Ergonomics Society. 2, p. 826-830 5 p.

Research output: Contribution to journalConference article

Nuts (fasteners)
Experiments
Microgravity
Bolts
experiment
6 Citations (Scopus)

Effects of glove frictional characteristics and load on grasp force and grasp control

Bronkema-Orr, L. & Bishu, R. R., Jan 1 1996, In : Proceedings of the Human Factors and Ergonomics Society. 1, p. 702-706 5 p.

Research output: Contribution to journalConference article

Friction
Dynamometers
experiment
gender
performance

Effects of laser intensity and ambient conditions on the laser induced plume

Zhang, Z. & Gogos, G., Jan 1 2004, In : American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. 375, 3, p. 483-489 7 p., IMECE2004-60421.

Research output: Contribution to journalConference article

Lasers
Laser ablation
Compressible flow
Pulsed laser deposition
Numerical models
5 Citations (Scopus)

Embedded PVDF film sensor for in-situ monitoring of structural integrity of laminated composites

Kwon, O. Y. & Dzenis, Y. A., Nov 25 2004, In : Key Engineering Materials. 270-273, III, p. 1929-1934 6 p.

Research output: Contribution to journalConference article

Laminated composites
Structural integrity
Acoustic emissions
Monitoring
Sensors
4 Citations (Scopus)

Energy Consumption Characteristics in Finish Hard Milling of Tool Steels

Liu, Z. Y., Sealy, M. P., Guo, Y. B. & Liu, Z. Q., Jan 1 2015, In : Procedia Manufacturing. 1, p. 477-486 10 p.

Research output: Contribution to journalConference article

Tool steel
Energy utilization
Machine tools
Greenhouses
Electric power utilization
2 Citations (Scopus)

Ergonomic glove: design and evaluation

Muralidhar, A., Bishu, R. R. & Hallbeck, M. S., Jan 1 1995, In : Proceedings of the Human Factors and Ergonomics Society. 1, p. 586-590 5 p.

Research output: Contribution to journalConference article

Ergonomics
ergonomics
evaluation
performance
test battery

Evaluation of ecosystem for design assessment and verification by BAJA dynamometer capstone team at the university of Nebraska

Steingrimsson, B., Phan, B., Nelson, C., Frederick, T. & Yi, S., Apr 2 2019, In : SAE Technical Papers. 2019-April, April

Research output: Contribution to journalConference article

Dynamometers
Ecosystems
Racing automobiles
Straw
Productivity
3 Citations (Scopus)

Evaluation of glove liners with objective, subjective and performance measures

Chen, S. C., Tarawneh, I., Goodwin, B. & Bishu, R. R., Dec 1 1998, In : Proceedings of the Human Factors and Ergonomics Society. 2, p. 846-850 5 p.

Research output: Contribution to journalConference article

Skin
evaluation
performance
Discriminators
Latexes
3 Citations (Scopus)

Evaluation of gloves: Short time test vs. long time tests

Bishu, R. R. & Goodwin, B., Dec 1 1997, In : Proceedings of the Human Factors and Ergonomics Society. 1, p. 692-696 5 p.

Research output: Contribution to journalConference article

evaluation
experiment
Experiments
test evaluation
performance
4 Citations (Scopus)

Evaluation of handle positions using force/endurance relationship of an isometric holding task

Bishu, R. R., Myung, R. H. & Deeb, J. M., Jan 1 1990, In : Proceedings of the Human Factors Society. p. 692-696 5 p.

Research output: Contribution to journalConference article

Durability
Containers
Polynomials
Experiments
7 Citations (Scopus)

Finite Element Analysis of Machining Damage in Single-Grit Grinding of Ceramic Knee Implants

Sun, D. W., Sealy, M. P., Liu, Z. Y., Fu, C. H., Guo, Y. B., Fang, F. Z. & Zhang, B., Jan 1 2015, In : Procedia Manufacturing. 1, p. 644-654 11 p.

Research output: Contribution to journalConference article

Machining
Alumina
Microcracks
Finite element method
Constitutive models

Finite element analysis of the covered microstent

Gu, L., Kumar, A. V., Santra, S. & Mericle, R. A., Jan 1 2003, In : American Society of Mechanical Engineers, Bioengineering Division (Publication) BED. 55, p. 135-136 2 p.

Research output: Contribution to journalConference article

Stents
Finite element method
Silicones
Metals
1 Citation (Scopus)
Atomic Force Microscope
Nonlinear Vibration
Cantilever
Finite Element Simulation
Atomic Force Microscopy

Force distribution at hand/handle coupling. The effect of handle type

Bishu, R. R., Wei, W., Hallbeck, M. S. & Cochran, D. J., Dec 1 1992, In : Proceedings of the Human Factors Society. 1, p. 816-820 5 p.

Research output: Contribution to journalConference article

Containers
Resistors
Energy transfer
Geometry
Experiments

FORMATION AND EJECTION OF EDM DEBRIS.

Rajurkar, K. P. & Pandit, S. M., Dec 1 1985, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Debris
Drop formation
Kinetic energy
Shock waves
Machining

FORMATION AND EJECTION OF EDM DEBRIS.

Rajurkar, K. P. & Pandit, S. M., Dec 1 1985, In : American Society of Mechanical Engineers (Paper).

Research output: Contribution to journalConference article

Debris
Drop formation
Kinetic energy
Shock waves
Machining
7 Citations (Scopus)

Hand-handle orientation and maximum force

Hallbeck, B. L., Cochran, D. J., Stonecipher, B. L., Riley, M. W. & Bishu, R. R., Jan 1 1990, In : Proceedings of the Human Factors Society. p. 800-804 5 p.

Research output: Contribution to journalConference article

Muscle
Friction
Industry
1 Citation (Scopus)

Hot film sensors in unsteady air flow - analysis and experiment

Cole, K. D. & Liang, P. W., Dec 1 1993, In : American Society of Mechanical Engineers (Paper). p. 1-10 10 p.

Research output: Contribution to journalConference article

Sensors
Unsteady flow
Air
Shear stress
Experiments
4 Citations (Scopus)

Hybrid transient-parametric AE analysis of histories of damage micromechanisms in composites

Dzenis, Y. & Qian, J., Jan 1 2001, In : Proceedings of SPIE - The International Society for Optical Engineering. 4335, p. 361-370 10 p.

Research output: Contribution to journalConference article

Waveform
waveforms
Damage
Composite
histories
40 Citations (Scopus)

Imaging of flexural and torsional resonance modes of atomic force microscopy cantilevers using optical interferometry

Reinstaedtler, M., Rabe, U., Scherer, V., Turner, J. A. & Arnold, W., Jun 10 2003, In : Surface Science. 532-535, p. 1152-1158 7 p.

Research output: Contribution to journalConference article

Ultrasonic transducers
Piezoelectric transducers
Cantilever beams
Silicon
Interferometry
1 Citation (Scopus)

Increasing or decreasing? The menu direction effect on user performance

Bishu, R. R. & Zhan, P., Dec 1 1992, In : Proceedings of the Human Factors Society. 1, p. 326-330 5 p.

Research output: Contribution to journalConference article

Inspection and quality: Human factors issues

Gramopadhye, A. K. & Bishu, R., Dec 1 1998, In : Proceedings of the Human Factors and Ergonomics Society. 2, 1 p.

Research output: Contribution to journalConference article

Human engineering
Inspection
control process
performance
intervention strategy
1 Citation (Scopus)

Long-term strength and damage accumulation in laminates

Dzenis, Y. A. & Joshi, S. P., Jan 1 1993, In : Collection of Technical Papers - AIAA/ASME Structures, Structural Dynamics and Materials Conference. pt 4, p. 1873-1880 8 p.

Research output: Contribution to journalConference article

Laminates
Stiffness
Random processes
Deterioration

Low velocity impact of ABS after shot peening predefined layers during additive manufacturing

Hadidi, H., Mailand, B., Sundermann, T., Johnson, E., Madireddy, G., Negahban, M., Delbreilh, L. & Sealy, M., Jan 1 2019, In : Procedia Manufacturing. 34, p. 594-602 9 p.

Research output: Contribution to journalConference article

Open Access
3D printers
Shot peening
Butadiene
Styrene
Impact strength
Mechanical engineering
Patient rehabilitation
Students
Marketing
Communication